0 reviews
Be the first to review this item!
Dayton Audio LBB-5 5 x 26650 Lithium Battery Charger Board / Module
Brand Dayton Audio
Shop more from PEX
* Click "Add to Shopping List" to save the item for later purchase. You can receive a notice email when it is back in stock.
Pricing Note
Product Description
Manufacturer Part Number: LBB-5
Lithium battery power is your best option when building high power portable sound projects. This battery holder charges five 26650 Li-Ion batteries when used with a 5 to 24 VDC power supply (sold separately). Enjoy prolonged listening with this 21 VDC output advanced power option.
Key Features:
Dayton Audio LBB-5 5 x 26650 Lithium Battery Charger Board / Module
Dayton Audio's LBB-5 battery holder board delivers high current portable power to small amplifiers, 200W amp boards, or other 21 VDC projects by combining the voltage from five 26650 Li-Ion batteries (sold separately). It's small enough to fit inside a portable speaker and has multiple 21 VDC outputs to power an amp, tone control, Bluetooth, and other preamp component boards. Enjoy the extended listening time you get from Li-Ion batteries on a single charge. 26650 Li-Ion batteries come in a variety of amperages, and to get the longest playtime from a 200W amplifier or amp board use at least 5000 mAh batteries.
There's no need to remove the batteries from the holder because the Dayton Audio LBB-5 has a built-in charge circuit. Just plug in a power supply and the over/under charge circuit prevents correctly installed batteries from overcharging and fully discharging, shortening their life. The LBB-5 battery board needs a 5 to 24 VDC power supply (sold separately) to start the charging process and to start its output power. This enables you to listen to music while the batteries are charging with this amazing battery holder. To view charging and battery status press the push button on the battery board, or use Dayton Audio's push button and LED kit (sold seperately) to view status externally. The LBB-5CL also comes with input and output charging and power cables.A power supply must be plugged into the holder for the battery board to have power output after installing or reinstalling batteries. The polarity of the batteries must match the polarity of the battery holder to prevent damage.
To charge and power 5VDC devices, and recharge the LBB-5 battery board outside your project use Dayton Audio's . The expassion board has two USB ports that put out 2A of current for smart phones, tablets, and other 5 VDC devices. The board also has a 2.1 x 5.5 tip positive DC coax power jack so you don't have to solder in an external charging jack. To make it even easier the LBB-5EB includes a 6-pin 8" wiring harness that plugs directly into the battery board socket J28.
Note: The Dayton Audio LBB-5 is an independent battery holder board and it's design does not work with Dayton Audio KAB board's built-in charge circuit. Plug the LBB-5 into the two wire DC input on the KAB boards or use Dayton Audio battery board KAB-BE with Dayton Audio KAB Bluetooth amp boards.
Specifications: Output voltage: 21 VDC @ 10A Max Input voltage required: 5 to 24 VDC at least 2A recommended DC coax jack size: 2.1 x 5.5 mm center (+) polarity Batteries: Five x 26650 Li-Ion (sold separately) Dimensions: 6" W x 4.5" D x 1.71" H (152 x 114.5 x 43.5 mm) Charge times to 90% capacity: 5V 2A 32 hrs., 12V 2A 6.5 hrs., 19V 2A 3.5 hrs., 24V 2A 3 hrs.
Lithium battery power is your best option when building high power portable sound projects. This battery holder charges five 26650 Li-Ion batteries when used with a 5 to 24 VDC power supply (sold separately). Enjoy prolonged listening with this 21 VDC output advanced power option.
Key Features:
- 21 VDC output power for amplified speakers and other portable projects
- Works with 5 to 24 VDC power supplies for versatility
- Common 2.1 x 5.5 mm input power jack
- Uses five standard 26650 3.7 VDC Li-Ion batteries (sold separately)
Dayton Audio LBB-5 5 x 26650 Lithium Battery Charger Board / Module
Dayton Audio's LBB-5 battery holder board delivers high current portable power to small amplifiers, 200W amp boards, or other 21 VDC projects by combining the voltage from five 26650 Li-Ion batteries (sold separately). It's small enough to fit inside a portable speaker and has multiple 21 VDC outputs to power an amp, tone control, Bluetooth, and other preamp component boards. Enjoy the extended listening time you get from Li-Ion batteries on a single charge. 26650 Li-Ion batteries come in a variety of amperages, and to get the longest playtime from a 200W amplifier or amp board use at least 5000 mAh batteries.
There's no need to remove the batteries from the holder because the Dayton Audio LBB-5 has a built-in charge circuit. Just plug in a power supply and the over/under charge circuit prevents correctly installed batteries from overcharging and fully discharging, shortening their life. The LBB-5 battery board needs a 5 to 24 VDC power supply (sold separately) to start the charging process and to start its output power. This enables you to listen to music while the batteries are charging with this amazing battery holder. To view charging and battery status press the push button on the battery board, or use Dayton Audio's push button and LED kit (sold seperately) to view status externally. The LBB-5CL also comes with input and output charging and power cables.A power supply must be plugged into the holder for the battery board to have power output after installing or reinstalling batteries. The polarity of the batteries must match the polarity of the battery holder to prevent damage.
To charge and power 5VDC devices, and recharge the LBB-5 battery board outside your project use Dayton Audio's . The expassion board has two USB ports that put out 2A of current for smart phones, tablets, and other 5 VDC devices. The board also has a 2.1 x 5.5 tip positive DC coax power jack so you don't have to solder in an external charging jack. To make it even easier the LBB-5EB includes a 6-pin 8" wiring harness that plugs directly into the battery board socket J28.
Note: The Dayton Audio LBB-5 is an independent battery holder board and it's design does not work with Dayton Audio KAB board's built-in charge circuit. Plug the LBB-5 into the two wire DC input on the KAB boards or use Dayton Audio battery board KAB-BE with Dayton Audio KAB Bluetooth amp boards.
Specifications: Output voltage: 21 VDC @ 10A Max Input voltage required: 5 to 24 VDC at least 2A recommended DC coax jack size: 2.1 x 5.5 mm center (+) polarity Batteries: Five x 26650 Li-Ion (sold separately) Dimensions: 6" W x 4.5" D x 1.71" H (152 x 114.5 x 43.5 mm) Charge times to 90% capacity: 5V 2A 32 hrs., 12V 2A 6.5 hrs., 19V 2A 3.5 hrs., 24V 2A 3 hrs.
Product Details | |
|---|---|
| Brand | Dayton Audio |
| Model | LBB-5 |
| Part Number | 325-133 |
| UPC | 848791006098 |
| Unit of Measure | Each |
| Weight | 0.5 |
Product Specifications | |
|---|---|
| Board Type | Battery & Power |
Attention CA Residents: Prop 65 Warning
WARNING:
This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov.
Shipping Restrictions
This product can't be shipped to Canada, Australia, United Kingdom, APO addresses or the following regions: HI, AK, PR.
Need more information?
Our staff are available to answer any questions you may have about this item
Our staff are available to answer any questions you may have about this item
Look Similar Items By Category