Turn a 2.5" SATA HDD/SSD into a 3.5" SATA Drive
Supports 2.5" SSD/HDD up to 12.5mm in height
Standard 3.5" HDD mounting points
Support for SATA revision I/II/III (1.5/3.0/6.0 Gbps)
The 25SAT35HDD 2.5" to 3.5" hard drive adapter enclosure turns a 2.5" SATA hard drive (HDD) or solid state drive (SSD) into a 3.5" drive.
The adapter enclosure lets you substitute a 3.5" hard drive for a 2.5" SSD/HDD in any application that would typically require a 3.5" drive, such as desktop chassis, backplane, or docking station. The enclosure has the same dimensions as a standard 3.5" hard drive, including mounting points, and SATA connector locations.
With support for drives up to 12.5mm in height, and high-capacity SATA I/II/III drives (tested up to 1TB) this HDD adapter ensures compatibility with virtually any 2.5" SATA hard drive or solid state drive.
The 25SAT35HDD is backed by a StarTech 2-year warranty and free lifetime technical support.
|ASI Distribution USA||146722|
|D and H||25SAT35HDD|
|Ingram Micro USA||TW6107|
|Number of 2.5 inch bays||1|
|Number of Drives||1|
|Max Drive Capacity||Currently tested with up to 1TB 7200 RPM hard drives|
|Type and Rate||SATA III (6 Gbps)|
|Drive Connectors||1 - SATA Data & Power Combo (7+15 pin)|
|Host Connectors||1 - SATA Data & Power Combo (7+15 pin)|
|Humidity||5% - 85% RH|
|Operating Temperature||5°C to 55°C (32°F to 131°F)|
|Storage Temperature||5°C to 55°C (32°F to 131°F)|
|Enclosure Type||Aluminum and Plastic|
|Max Drive Height||0.5 in [12.5 mm]|
|Product Height||1.4 in [36 mm]|
|Product Length||5.7 in [146 mm]|
|Product Weight||9.2 oz [260 g]|
|Product Width||4 in [101.5 mm]|
|What's in the Box|
|Included in Package||1 - 2.5" to 3.5" SATA HDD/SSD Enclosure|
|1 - Screw kit|
|1 - Install Guide|