5 out of 5
Parts Express External Bluetooth/ Wi-Fi Antenna Kit with 3-1/2" (89 mm) Cable
* Click "Add to Cart" to calculate shipping and delivery time.
Pricing Note
Product Description
Replace or add an external antenna to your Bluetooth or Wi-Fi device or project. It adds distance and enables you to mount your wireless chip or wireless audio boards inside metal enclosures.
Key Features:
External Bluetooth/ Wi-Fi Antenna Kit with 3-1/2" (89 mm) Cable
Replace a broken or missing Bluetooth or Wi-Fi antenna with this Bluetooth/ Wi-Fi antenna kit. The 2" right angle rubber antenna fits into SMA male prong antenna sockets on most audio amplifiers, dongles, and other wireless transmit/receive devices.
This kit is the answer for those Bluetooth or Wi-Fi projects that require a metal enclosure. Metal enclosures work great for blocking out, or keeping in RF interference. Start by drilling a small 1/4" hole for the gold plated SMA socket into the metal enclosure and use the included hardware to secure the socket. Next snap the I-pex compatible connector at the end 3-1/2" pigtail into the I-pex socket on the PC board. If the PC board doesn't have this connector, cut the connector off the pigtail and solder it directly to the antenna terminal trace. Screw the rubber antenna into the SMA socket and you now have Bluetooth or Wi-Fi receive/transmit capability even though your board is surrounded by metal.
Specifications: Antenna connector: SMA Pigtail: 3-1/2" (90 mm) with I-pex center female socket Material: Gold plated brass Cable ohms: 50 Mounting hole required: 1/4" Mounting thickness: Up to 1/4" Rubber antenna: 2" right angle with center female socket.
Key Features:
- Antenna mounting socket includes 3-1/2" pigtail for versatility
- Connector on pigtail mounts to PC boards with I-pex compatible sockets
- Antenna chassis socket with center prong SMA connector requires 1/4" hole
- Brass gold plated SMA connectors for best conductivity
- Right angle 2" long rubber antenna with common center female socket SMA connector
- Includes gold plated mounting hardware
External Bluetooth/ Wi-Fi Antenna Kit with 3-1/2" (89 mm) Cable
Replace a broken or missing Bluetooth or Wi-Fi antenna with this Bluetooth/ Wi-Fi antenna kit. The 2" right angle rubber antenna fits into SMA male prong antenna sockets on most audio amplifiers, dongles, and other wireless transmit/receive devices.
This kit is the answer for those Bluetooth or Wi-Fi projects that require a metal enclosure. Metal enclosures work great for blocking out, or keeping in RF interference. Start by drilling a small 1/4" hole for the gold plated SMA socket into the metal enclosure and use the included hardware to secure the socket. Next snap the I-pex compatible connector at the end 3-1/2" pigtail into the I-pex socket on the PC board. If the PC board doesn't have this connector, cut the connector off the pigtail and solder it directly to the antenna terminal trace. Screw the rubber antenna into the SMA socket and you now have Bluetooth or Wi-Fi receive/transmit capability even though your board is surrounded by metal.
Specifications: Antenna connector: SMA Pigtail: 3-1/2" (90 mm) with I-pex center female socket Material: Gold plated brass Cable ohms: 50 Mounting hole required: 1/4" Mounting thickness: Up to 1/4" Rubber antenna: 2" right angle with center female socket.
Product Details | |
|---|---|
| Brand | Parts Express |
| Part Number | 320-625 |
| UPC | 848864050560 |
| Unit of Measure | Each |
| Weight | 0.04 |
Product Specifications | |
|---|---|
| Board Type | Bluetooth / Wi-Fi Receiver |
| Special Features | Bluetooth-Bluetooth with aptX |
Attention CA Residents: Prop 65 Warning
WARNING:
This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov.
Need more information?
Our staff are available to answer any questions you may have about this item
Our staff are available to answer any questions you may have about this item
Look Similar Items By Category
Customer Reviews
By James R Kennedy
Date: October 08, 2022
antenna did it's job
Rating: 
[5 of 5 Stars!]
[5 of 5 Stars!]
By Jacques Bercume
Date: July 05, 2022
Extended the range, on my ammo can Bluetooth speaker tremendously!!
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By Bill Watson
Date: December 10, 2021
Easy to install; connects to Bluetooth ASAP.
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By About The Details
Date: April 11, 2021
Nice and small, reasonably long coax lead. I cut the lead to the internal antenna on the HC-05 board and soldered this on to get the signal outside the metal project box. Not certain I had to do this but . . . Seems to work fine in the house where I'm using my project. I added the HC-05 to an Arduino shield and had to add a relay for the TX/RX signals in order to program the Arduino (an issue with the HC-05 not the antenna).The only issue I have had is tightening the antenna so it remains in one position but where it is on the back panel seems to work fine (with the phone app I built).
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By craig h.
Date: March 17, 2021
I liked everything that was described .
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By Anthony S.
Date: January 01, 2021
The range on my speaker drastically improved over the anntenee that came with my speaker
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]