4 out of 5
Product Description
Manufacturer Part Number: TG-100D
This kit combines the Paasche TG-3F, D500SR compressor, and AC-7 cleaning kit.
TG#2 Double Action Airbrush, .4 oz cup, Cup Cover, Size 1 and 3 Heads, Fan Aircap, Hanger, (2) Wrenches, 6ft braided hose, lessons booklet and manual.
Specs:
Part Number: TG-3F
Type: Double Action, Internal mix, Gravity feed
Head Size: Size 1 (.25MM) Size 2 (.38mm) Size 3 (.66mm)
Fluid Packing: Can spray solvent or water based fluids
Air Volume: 20 PSI @ .5 CFM
Air Pressure: 20-75 PSI
Air Inlet: ¼-20 Thread (Paasche thread) - adapters available
Bottle size: N/A
Spray Pattern: HairLine to 1-1/2 With Fan up to 3
Weight: 1 Lbs
Finish: Chrome plated body
The D500SR airbrush compressor is perfect for any hobby or artist airbrush. The maximum operating pressure will be about 35 PSI depending on airbrush being used. The D500SR is light weight, easily mobile and best of all quiet. The auto shutoff feature turn the compressor off when the airbrush is not being triggered to increase compressor life. Included with the compressor is a 1/8BPS adaptor for competitor hoses.
The compressor features include:
1/5 HP piston compressor
Regulator & moisture trap
Delivers 1-35 PSI depending on airbrush being used
Standard Paasche 1/4NPT hose fitting
1/8 BPS hose adaptor for competitor hoses
Auto shutoff feature
Carrying handle
Quiet: noise level is 47 Db's
Includes 1 year warranty from date of purchase
7 piece airbrush cleaning kit. Can be used to clean any airbrush.
Weight: 12 lbs
Dimensions: 12 X 12 X 8 in
This kit combines the Paasche TG-3F, D500SR compressor, and AC-7 cleaning kit.
TG#2 Double Action Airbrush, .4 oz cup, Cup Cover, Size 1 and 3 Heads, Fan Aircap, Hanger, (2) Wrenches, 6ft braided hose, lessons booklet and manual.
Specs:
Part Number: TG-3F
Type: Double Action, Internal mix, Gravity feed
Head Size: Size 1 (.25MM) Size 2 (.38mm) Size 3 (.66mm)
Fluid Packing: Can spray solvent or water based fluids
Air Volume: 20 PSI @ .5 CFM
Air Pressure: 20-75 PSI
Air Inlet: ¼-20 Thread (Paasche thread) - adapters available
Bottle size: N/A
Spray Pattern: HairLine to 1-1/2 With Fan up to 3
Weight: 1 Lbs
Finish: Chrome plated body
The D500SR airbrush compressor is perfect for any hobby or artist airbrush. The maximum operating pressure will be about 35 PSI depending on airbrush being used. The D500SR is light weight, easily mobile and best of all quiet. The auto shutoff feature turn the compressor off when the airbrush is not being triggered to increase compressor life. Included with the compressor is a 1/8BPS adaptor for competitor hoses.
The compressor features include:
1/5 HP piston compressor
Regulator & moisture trap
Delivers 1-35 PSI depending on airbrush being used
Standard Paasche 1/4NPT hose fitting
1/8 BPS hose adaptor for competitor hoses
Auto shutoff feature
Carrying handle
Quiet: noise level is 47 Db's
Includes 1 year warranty from date of purchase
7 piece airbrush cleaning kit. Can be used to clean any airbrush.
Weight: 12 lbs
Dimensions: 12 X 12 X 8 in
Attention CA Residents: Prop 65 Warning
WARNING:
This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov.
Need more information?
Our staff are available to answer any questions you may have about this item
Our staff are available to answer any questions you may have about this item
Customer Reviews
By Sharon Renee
Date: January 09, 2018
Very nice set, professional quality...
Rating: 
[5 of 5 Stars!]
[5 of 5 Stars!]
By Jerry
Date: November 04, 2017
Good airbrush kit for the beginner get what you pay for though be careful it can't be used for too long without heating up because there's no tank on it and once it starts heating up it'll actually start blowing water through the line because the moisture trap can't handle it pretty much my only real complaint with this air compressor kit is the moisture trap itself but all in all for the money I really can't complain at least it isn't burnt out on me yet but if you doing large jobs for Miniatures like Warhammer 40,000 or age of Sigmar or any other tabletop game like I am I most likely recommend spending a little bit more and getting an air compressor with a tank especially starting out no make it a lot easier for you in the long run
Rating: 
[3 of 5 Stars!]
[3 of 5 Stars!]
By A Customer
Date: May 15, 2017
awesome deal, the compressor does tend to heat up pretty quickly. But I have gotten a lot of use out of this little package. Awesome for people wanting to learn airbrush.
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By Lucifer
Date: March 16, 2017
This airbrush is awful and I'll be replacing it soon. It's worth the 50-60 bucks to get an Iwata Eclipse or something.
Rating: 
[1 of 5 Stars!]
[1 of 5 Stars!]
By A Customer
Date: March 12, 2017
Best bang for your buck.
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By hey!
Date: January 19, 2017
My first attempt at airbrushing. Very easy and fun to use. Paint went on very nicely.
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]