skip to footer block
PAB Paasche HF 116 Adapter. Paasche hose to Masters and Iwata compressors. 1/4 NPT male to 1/8 BSP female. P7482913PAB-HF-116 https://cdnimages.opentip.com/full/PAB/PAB-HF-116.jpg Paasche HF 116 Adapter. Paasche hose to Masters and Iwata compressors. 1/4 NPT male to 1/8 BSP female. Manufacturer Part Number: HF-116Adapter. Paasche hose to Masters and Iwata compressors. 1/4 NPT male to 1/8 BSP female.Weight: 0.1 lbsDimensions: 1.5 X 0.5 X 0.5 in 7482913 026614055373 0.1000lbs 0.00 0.00 0.00
Paasche
5.9700 2025-04-19 In Stock
customer review - by , May 5, 2023
4/ 5stars
It fits well and does it's job... as long as you can find an o-ring for it (teflon tape isn't enough to seal it). The description states it includes the required o-ring but same as many others have experienced, my package was sealed but the o-ring was missing. Fortunately I have an -o-ring set and was able to find one that worked.Also overpriced. This adapter is made from aluminum which makes the price of $8 about twice as much as it should cost, given it had no o-ring included.
customer review - by , April 4, 2023
5/ 5stars
El producto se ajusta perfectamente a las necesidades
customer review - by , April 4, 2023
4/ 5stars
This works as intended. However connecting a Paasche airline to my Master Airbrush compressor it leaks air. Connecting to the Paasche line it felt gritty and I could see metal dust after screwing it on. (luckily it was from the adapter not my compressor male end) I am going to try putting a seal inside against the 1/8 side; Paasche's airline has a seal already for its side of the connection. Maybe that will help but so far I ended up just putting an adapter on my Paasche airbrush to use Master Airbrush's line
customer review - by , August 8, 2022
5/ 5stars
Hard to find the correct fitting, but this fit the bill perfectly.
customer review - by , July 7, 2022
5/ 5stars
I needed this adapter to go on my Master Airbrush Model TC-326T Cool Runner II compressor outlet to my Paasche airbrush hose. I always use Teflon tape on the threads of air fittings and I have never had problems of air leaks on fittings.
customer review - by , April 4, 2021
5/ 5stars
It was the only thing from my Paasche airbrush setup that I bought from here that I was able to use.
customer review - by , January 1, 2021
5/ 5stars
This adapter works very well for my Paasche H single action airbrush and its supplied Paasche hose to connect to a Master TC-320 compressor. HOWEVER, when I installed the adapter to the compressor and then the airbrush hose to the adapter, I started up the compressor and noticed a small leak of air between the adapter and compressor. No worries, some handy PTFE did the trick and maintains pressure. Now i can begin using my airbrush finally! Do maybe 3 or 4 full clockwise rotations of PTFE beginning at the rear of the compressors threaded connection and leave the first thread or 2 open. Should work!
customer review - by , January 1, 2021
5/ 5stars
Already slightly annoyed that my airbrush needed an over priced adapter in the first place, it came with a large chip for free from manufacturing. Nice bonus. All in all it works just fine. Some teflon tape was needed on compressor side. Would've been better at a $4.25 price range.
customer review - by , October 10, 2020
4/ 5stars
I have two airbrushes, a Paasche and a Masters that came with the Masters compressor. The Paasche hose wouldn't fit on the compressor until I purchased this adapter. Now I can use either airbrush.
customer review - by , April 4, 2020
5/ 5stars
This is a 1/8 x 1/4 npt fitting. Don't expect this to adapt your Paasche airbrush to a 1/8 hose with this.
  »  
  »  
  »  
  »  
  »  
  »  

Paasche HF-116 Adapter. Paasche hose to Masters and Iwata compressors. 1/4 NPT male to 1/8 BSP female., Price/Ea

stars Rating 5 | 10 reviews
Brand Paasche
See other products from PAB
UPC: 026614055373
SKU: PAB-HF-116
Price: $5.97
Quantity:
Shipping:
$6.99 To [ 43215 ] Estimated Delivery Date: Apr 24, 2024 to Apr 26, 2024
In Stock
Share & Earn 10% Cash Back Best Price in Bulk

Product Description

Price is for Ea.

Manufacturer Part Number: HF-116

Adapter. Paasche hose to Masters and Iwata compressors. 1/4 NPT male to 1/8 BSP female.

Weight: 0.1 lbs

Dimensions: 1.5 X 0.5 X 0.5 in

warning tips WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov.

Return Policy

Liquid or paint item is non-returnable.
Need more information?
Our staff are available to answer any questions you may have about this item
Request More Information

Customer Reviews
5 out of 5
see all 10 reviews
5 stars
7
4 stars
3
3 stars
0
2 stars
0
1 stars
0
Write a Review
By Jason F
Date: May 14, 2023
It fits well and does it's job... as long as you can find an o-ring for it (teflon tape isn't enough to seal it). The description states it includes the required o-ring but same as many others have experienced, my package was sealed but the o-ring was missing. Fortunately I have an -o-ring set and was able to find one that worked.Also overpriced. This adapter is made from aluminum which makes the price of $8 about twice as much as it should cost, given it had no o-ring included.
Rating: 4 stars [4 of 5 Stars!]
By Alberto Roa Eslava
Date: April 19, 2023
El producto se ajusta perfectamente a las necesidades
Rating: 5 stars [5 of 5 Stars!]
By Peege
Date: April 12, 2023
This works as intended. However connecting a Paasche airline to my Master Airbrush compressor it leaks air. Connecting to the Paasche line it felt gritty and I could see metal dust after screwing it on. (luckily it was from the adapter not my compressor male end) I am going to try putting a seal inside against the 1/8 side; Paasche's airline has a seal already for its side of the connection. Maybe that will help but so far I ended up just putting an adapter on my Paasche airbrush to use Master Airbrush's line
Rating: 4 stars [4 of 5 Stars!]
By Enumclaw, WA
Date: August 03, 2022
Hard to find the correct fitting, but this fit the bill perfectly.
Rating: 5 stars [5 of 5 Stars!]
By Michael Patrick
Date: July 21, 2022
I needed this adapter to go on my Master Airbrush Model TC-326T Cool Runner II compressor outlet to my Paasche airbrush hose. I always use Teflon tape on the threads of air fittings and I have never had problems of air leaks on fittings.
Rating: 5 stars [5 of 5 Stars!]
By Davi Gol
Date: April 05, 2021
It was the only thing from my Paasche airbrush setup that I bought from here that I was able to use.
Rating: 5 stars [5 of 5 Stars!]
Items 1 - 6 of 10 reviews
 1  2  [Next]