skip to footer block
PAB Paasche 62 2 3 Sprayer w/ Plastic Bottle size 2 1.6 mm P4406177PAB-62-2-3 https://cdnimages.opentip.com/full/PAB/PAB-62-2-3.jpg Paasche 62 2 3 Sprayer w/ Plastic Bottle size 2 1.6 mm Manufacturer Part Number: 62-2-362 Sprayer Single Action – Internal Mix – Siphon Feed Airbrush:The 62-2-3 sprayer is a general sprayer and great for basic coating needs. It will handle thicker paints than the smaller pen type airbrushes. Can spray Water or Solvent based fluids. Spray pattern range is 1 to 2 inches. If air hose is needed order HL-3/16-10.62-2-3H Includes:62-2-3 Sprayer with 3oz bottle.Specs:Part Number: 62-2-3HType: Single Action, Internal mix, Siphon feedHead Size: Size 1 (1.6mm)Fluid Packing: Can spray solvent or water based fluidsAir Volume: 20 PSI @ .7 CFMAir Pressure: 20-75 PSIAir Inlet: ¼”NPT ThreadBottle size: 3oz or 8oz bottles availableSpray Pattern: 1 “to 2” RoundWeight: .4 LbsWeight: 0.5 lbsDimensions: 6 X 5 X 2 in 4406177 026614019139 1.13lbs 0.00 0.00 0.00
Paasche
34.5000 2024-03-20 In Stock
customer review - by , February 2, 2020
5/ 5stars
I love this sprayer. i use latex paints and it works great. Easy to clean by running hot soapy water through the gun.
customer review - by , January 1, 2020
4/ 5stars
Had a hard time looking for 8 oz bottlesPaasche sells them called h-209, and you need a longer straw vf-38. If you want to go up to 8oz
customer review - by , March 3, 2018
5/ 5stars
I agree fully with the review posted by Puchman66. Within its limits, this is a great little gun. I have six other spray guns ... all more expensive than this one, some much more expensive. This one fills the gap I had. I needed a spray gun for small jobs that I could use quickly and easily. This little guy fits the bill perfectly.
customer review - by , October 10, 2017
4/ 5stars
I like it !! Yes it is cheap. Yes, it is very limited . No you can't adjust the spray pattern and you don't have variable air pressure at the trigger. It is basically either on/off. But if you know what you are doing it is a very handy little gun for odd jobs and has a very predictable spray pattern. To use this gun and be satisfied with the results you MUST be savvy enough to thin the paint to match your needs and also adjust your air pressure at the tank. Like any gun you have to keep it clean and it is not designed for easy cleaning. Not impossible, just not easy thus the 4 stars out of 5.
customer review - by , February 2, 2017
5/ 5stars
This rocks. I was looking for a gun that put out about double the spray, or paint volume, of a rattle can. I set the air at 60 PSI and it does a wonderful job spraying small to medium parts. The paint was well atomized. I was shooting linear polyurethane (AwlGrip) and it did a great job. It was easy to clean up the gun too. All-in-all this is a nice solution for smaller jobs when I don't want to get out my expensive pressure pot set up. So much faster and quicker to clean up. This does a much better job of atomizing the paint than the Critter Gun, which I also have.
customer review - by , January 1, 2017
5/ 5stars
Good quality, great product, arrived on time
customer review - by , October 10, 2016
5/ 5stars
I love this sprayer use every day needs cleaned a lot but great
customer review - by , October 10, 2016
4/ 5stars
Great product! I use it for painting and coating small wood projects, and this sprayer is a perfect compromise between an airbrush and a detail sprayer. Be sure to use an inline air regulator with this tool for clean and even coats. 5 star product. 4 stars because seller sends spam asking for good review.
customer review - by , October 10, 2016
5/ 5stars
Excellent sprayer.I extend the uptake hose and use the tall narrow plastic bottles from the beauty supply store. Can switch between glazes in a flash.We use this system at the Community College in Phila.
customer review - by , July 7, 2016
5/ 5stars
This is very well-made, substantial spray gun and works extremely well. I read some complaints about it spraying too much paint, but if you control the pressure through the compressor's regulator, it works very well and is easy to control. Properly mixing and thinning the paint is also very important to good results. I just used it to paint some indoor louvered window shutters, and it put down a flawless finish.

Paasche 62-2-3 Sprayer w/ Plastic Bottle size 2 (1.6 mm)

stars Rating 5 | 10 reviews
Brand Paasche
See other products from PAB

UPC: 026614019139
SKU: PAB-62-2-3
Price: $34.50
Quantity:
Shipping:
$15.99 To [ 20149 ] Estimated Delivery Date: Mar 24, 2023 to Mar 28, 2023
In Stock
Share & Earn 10% Cash Back Best Price in Bulk

Product Description

Manufacturer Part Number: 62-2-3

62 Sprayer Single Action – Internal Mix – Siphon Feed Airbrush:
The 62-2-3 sprayer is a general sprayer and great for basic coating needs. It will handle thicker paints than the smaller pen type airbrushes. Can spray Water or Solvent based fluids. Spray pattern range is 1 to 2 inches. If air hose is needed order HL-3/16-10.

62-2-3H Includes:
62-2-3 Sprayer with 3oz bottle.

Specs:
Part Number: 62-2-3H
Type: Single Action, Internal mix, Siphon feed
Head Size: Size 1 (1.6mm)
Fluid Packing: Can spray solvent or water based fluids
Air Volume: 20 PSI @ .7 CFM
Air Pressure: 20-75 PSI
Air Inlet: ¼”NPT Thread
Bottle size: 3oz or 8oz bottles available
Spray Pattern: 1 “to 2” Round
Weight: .4 Lbs

Weight: 0.5 lbs

Dimensions: 6 X 5 X 2 in

warning tips WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov.
Need more information?
Our staff are available to answer any questions you may have about this item


Customer Reviews
5 stars
7
4 stars
3
3 stars
0
2 stars
0
1 stars
0
By david flietstra
Date: February 27, 2020
I love this sprayer. i use latex paints and it works great. Easy to clean by running hot soapy water through the gun.
Rating: 5 stars [5 of 5 Stars!]
By A Customer
Date: January 13, 2020
Had a hard time looking for 8 oz bottlesPaasche sells them called h-209, and you need a longer straw vf-38. If you want to go up to 8oz
Rating: 4 stars [4 of 5 Stars!]
By Grandpa
Date: March 16, 2018
I agree fully with the review posted by Puchman66. Within its limits, this is a great little gun. I have six other spray guns ... all more expensive than this one, some much more expensive. This one fills the gap I had. I needed a spray gun for small jobs that I could use quickly and easily. This little guy fits the bill perfectly.
Rating: 5 stars [5 of 5 Stars!]
By Puchman66
Date: October 10, 2017
I like it !! Yes it is cheap. Yes, it is very limited . No you can't adjust the spray pattern and you don't have variable air pressure at the trigger. It is basically either on/off. But if you know what you are doing it is a very handy little gun for odd jobs and has a very predictable spray pattern. To use this gun and be satisfied with the results you MUST be savvy enough to thin the paint to match your needs and also adjust your air pressure at the tank. Like any gun you have to keep it clean and it is not designed for easy cleaning. Not impossible, just not easy thus the 4 stars out of 5.
Rating: 4 stars [4 of 5 Stars!]
By Tim
Date: February 16, 2017
This rocks. I was looking for a gun that put out about double the spray, or paint volume, of a rattle can. I set the air at 60 PSI and it does a wonderful job spraying small to medium parts. The paint was well atomized. I was shooting linear polyurethane (AwlGrip) and it did a great job. It was easy to clean up the gun too. All-in-all this is a nice solution for smaller jobs when I don't want to get out my expensive pressure pot set up. So much faster and quicker to clean up. This does a much better job of atomizing the paint than the Critter Gun, which I also have.
Rating: 5 stars [5 of 5 Stars!]
By Tamara Cepero
Date: January 04, 2017
Good quality, great product, arrived on time
Rating: 5 stars [5 of 5 Stars!]
Items 1 - 6 of 10 reviews
 1  2  [Next]