I bought two sets of these for two small control rooms. They are really well made and most important, heavy. In that they are heavy, they do not resonate at all. After putting these in use, I am surprised they are not much more expensive. I also did not see any signs at all of weak welds mentioned in another review. I made an effort to see if I saw what another review mentioned and I can say I think the welds, if anything, were way beyond what would be needed for stands holding 25 lbs monitors. I'm super happy and highly recommend them.

These are very well made and heavy works perfect with my secret labs desk

I disliked this product because it came partially assembled. Not all the hardware was included. It was falling apart before I could use it.

These are neither svelte nor elegant, these things are bricks. Bricks that do their job quite well, so if you don't mind the weight, they are very good for the price.

These are neither svelte nor elegant, these things are bricks. Bricks that do their job quite well, so if you don't mind the weight, they are very good for the price.

I know these get good reviews overall; but I just wanted to add the data point that I used them about a week and either I didn't notice at first or (and I can't see why it would happen later because they are under almost no stress) but the spot welds holding the speaker pan on to the neck of the base are broke on one side on both stands. I have been constantly fussing with them because they wouldn't stay quite where I put them. I realized finally that its because there is all this flex because the spot welds broke and are holding only on one side. So . . . probably just a bad pair but I think I will try another brand of this sort of stand before I get these again! Your mileage may vary . . . .

I'm sure like many others ordering random things off the internet these days you're never sure what you're going to get. I expected them to be somewhat flimsy or feel cheap. Absolutely not. These are beyond rock solid. They have a lot of weight to them. All the hardware feels well made. They hold up my small monitors without even trying. I could honestly probably stand on top of these and they would be fine. I'm thrilled with the quality and they've made a huge difference in how immersive my sound is.If you have studio monitors for desk speakers these are a MUST HAVE!

These are a lot heavier than I was originally anticipating. But this is great because they can firmly hold the weight of my KRK V6's on them without any wobbling.

Perfect Desktop monitor stands. The adjustment is easy, and they hold my studio monitors without any issues.

I know they're meant for different monitors, but work well!

These stands are wonderful but you need to take the time to make sure they are tight.I have my Yamaha ns10s on them horizontally and the fit perfectly. The height adjustment is sturdy and enough for a desk application. And the unsung hero is the tilt.My only issue is the bottom plate. It needs more than the supplied screw to keep it steady. I'd rather it have three screws. I had to really crank them to keep them tight so just be wary. The last thing you want is for one of these to tumble.

These stands can't be assembled as packaged: the rod has a threaded hole on one end which is supposed to connect to the base, and is secured with a bolt. However, on one of the two units, the threads are recessed so far into the rod that the included bolt will not reach it when pushed through the base.Additionally, the bolts that connect the top platform to the shaft cannot be tightened in a way to completely eliminate rattling or wiggling. For a stand that is meant to hold speakers, that's completely unacceptable.

Solid. Excellent construction. No wobble and stays in place. Smart design with the adjustable feet. I tried a few other designs and this one works best. Ideal for horizontal speaker placement, but would work either way.

Can hold up much more than just a monitors weight quality build as well

Quality product for the price. My only complaint is that they seem to be made for monitors that lay on their side, which most do not, however, my 6” KRK V6 S2 monitors fit on them, although they do hang off the stand a bit in the back, but it's not a problem and there's no danger of them falling. I love the swivel action and ability to angle them down a bit. Both features I use frequently, as I have a sit/stand type of diy desk that I built. All in all a good purchase that I've been very pleased with.

These are not the best option for Yamaha HS8 monitors, but short of using milk crates or building my own they are the only desktop stands (The Gator Frameworks stands are virtually identical) I could find that would work. A few things to be aware of: - Do NOT place HS8's on their side, the form factor will not fit on the plate and it is expressly stated in the HS8 manual that these monitors should be kept vertical - You'll have to turn the top plate sideways, otherwise the front and back of the monitors will hang off. This means that you can't tilt the monitors forward and backward but only side to side (which is okay because of the lip that now runs along the side of the monitor will make it lean if you don't put a piece of MDF down or use thick pads). Placing the monitors on the plate sideways fits them just about perfectly and distributes the weight pretty evenly - Use pads, I cut mine to fit the plate so I wouldn't have to deal with the aforementioned lip problemOverall the stands seem sturdy enough to hold the 29 pound beasts, but I check them from time to time for stability. The maximum weight these stands will hold according another website is 45 evenly distributed pounds but I wouldn't try to put anything bigger than an HS8 on them.

My only issue is that the packaging wasn't great so one of the rubber feet was slightly damaged. I'm sure they would replace the damaged foot if I asked but it really doesn't bother me. Just mentioning this because it could've been something more crucial that was damaged or bent

These stands are well made and are perfect for my computer monitors. I needed stands to elevate 2 monitors on my glass desk and was not comfortable with purchasing the monitor support that uses a clamp on glass. The On Stage stands are perfect as they do not take much room, are adjustable and did o mention they are sturdy and do not wobble or shake.I am a musician and use On Stage products for mic and amplifier stands so I already knew it would be great quality.Well worth the purchase.

Did not come with the necessary hardware

These are actually quite large - I got them to hold up a pair of Eris 3.5s, and could fit two of them side by side on one stand. With that being said, these look like they'll be a great lifetime investment, as they can hold just about any speaker you put on them. Very solid, very dependable and they look nice on any desk - highly recommend!