skip to footer block
CED Fender P GTNN13 Nut Fender® Pre slotted Bone for Tele and Strat P7254113CED-P-GTNN13 https://cdnimages.opentip.com/full/CED/CED-P-GTNN13.jpg Fender P GTNN13 Nut Fender® Pre slotted Bone for Tele and Strat Manufacturer Part Number: P-GTNN13Original Fender pre-slotted bone nut for Teles and Strats.Measurements and Specs Item Length1.6875 Item Width0.125 in. Radius9.5 in. Packaging Dimensions2.45 in. × 2.77 in. × 0.35 in. Weight (Packaging)0.018 lbs. 7254113 885978423125 0.0200lbs 0.00 0.00 0.00
Fender
16.3800 2025-04-24 In Stock
customer review - by , February 2, 2018
5/ 5stars
The nut improved the tone of my Strat. It was a good upgrade, though it took a while to sand so that the size, shape, and string grooves replicated the original plastic nut.
customer review - by , October 10, 2017
5/ 5stars
so good!
customer review - by , September 9, 2017
4/ 5stars
Good but had to sand down a good bit to get where I wanted. Overall improves the guitar just may need to tweak it a bit.
customer review - by , September 9, 2017
5/ 5stars
Bought this as a replacement to the black TUSQ graphite nut which had a strange ABS plastic feel and produced A very warm hollow sound, with horrible buzz. Back to OEM now and loved the drop in installation on my strat after dremel sanding that plastic mold notch off the back. This nut restored the bright resonant tone Fenders are known for, the action feels more responsive on the open notes for trills and pull off notes than the other nut did.
customer review - by , August 8, 2017
5/ 5stars
Fit perfectly on my 2003 made in Mexico Telecaster neck this nut needs a little bit of filing because the string slots are already started but not to the correct height unless you like really high action
customer review - by , June 6, 2017
5/ 5stars
As described and fit fine to replace a chipped nut in a 62 AVRI Tele .
customer review - by , June 6, 2017
5/ 5stars
love it!
customer review - by , May 5, 2017
4/ 5stars
A little bit off on the angle of of the neck on my E serries Jap Strat. Pretty much works fine though.
customer review - by , March 3, 2017
2/ 5stars
THE GOOD:
- The nut fit into my MIM Stratocaster neck great, light tapping with a rubber mallet seated it firmly. No wiggle room.
- The quality of the bone is superb, no blemishes or discoloration.
- The slots fit light and medium gauge strings perfectly.

THE BAD:
- Something off happened. The template for the slotting must have been off or whatnot. The spacing between high E and B is over .024 wider than the rest. Also, the low E is several thousandths further away from the edge, everything got shifted. End result, there's tons of fret space for the low E, but the high E is almost off the fretboard. This makes playing a lesson in frustration. Compared against the original melamine nut, you can easily see the differences.

For now, I've taken a punch and knocked that sucker over. Looks ugly, but hey, at least I can use it.

I plan on returning this nut and trying another of the same. Maybe I got a bad one?

-- This review is based on the item I received, I'll update if the next one doesn't seem defective.
customer review - by , February 2, 2017
5/ 5stars
I have two Strats that I retro-fitted with this nut. Works great. Sounds great.
  »  
  »  
  »  
  »  

Fender P-GTNN13 Nut - Fender®, Pre-slotted, Bone, for Tele and Strat

stars Rating 5 | 27 reviews
Brand Fender
Shop more from CED
UPC: 885978423125
SKU: CED-P-GTNN13
Price: $16.38
Quantity:
In Stock
*  Click "Add to Cart" to calculate shipping and delivery time.
Share & Earn 10% Cash Back Best Price in Bulk

Product Description

Manufacturer Part Number: P-GTNN13

Original Fender pre-slotted bone nut for Teles and Strats.

Measurements and Specs


warning tips WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov.
Need more information?
Our staff are available to answer any questions you may have about this item
Request More Information

Customer Reviews
5 out of 5
see all 27 reviews
5 stars
18
4 stars
8
3 stars
0
2 stars
1
1 stars
0
Write a Review
By Stinker McGee
Date: February 04, 2018
The nut improved the tone of my Strat. It was a good upgrade, though it took a while to sand so that the size, shape, and string grooves replicated the original plastic nut.
Rating: 5 stars [5 of 5 Stars!]
By maxi
Date: October 12, 2017
so good!
Rating: 5 stars [5 of 5 Stars!]
By Robert
Date: September 27, 2017
Good but had to sand down a good bit to get where I wanted. Overall improves the guitar just may need to tweak it a bit.
Rating: 4 stars [4 of 5 Stars!]
By Gary Grinkevich
Date: September 21, 2017
Bought this as a replacement to the black TUSQ graphite nut which had a strange ABS plastic feel and produced A very warm hollow sound, with horrible buzz. Back to OEM now and loved the drop in installation on my strat after dremel sanding that plastic mold notch off the back. This nut restored the bright resonant tone Fenders are known for, the action feels more responsive on the open notes for trills and pull off notes than the other nut did.
Rating: 5 stars [5 of 5 Stars!]
By AJ
Date: August 18, 2017
Fit perfectly on my 2003 made in Mexico Telecaster neck this nut needs a little bit of filing because the string slots are already started but not to the correct height unless you like really high action
Rating: 5 stars [5 of 5 Stars!]
By Junior Worley
Date: June 27, 2017
As described and fit fine to replace a chipped nut in a 62 AVRI Tele .
Rating: 5 stars [5 of 5 Stars!]
Items 1 - 6 of 27 reviews
 1  2  3  4  5  [Next]