5 out of 5
Product Description
- Made from upgraded PVC with better quality, no plastic smell and not easy to shrink and deform.
- The 3mm table cover is heavy enough to keep the cover from slipping or moving.
- The table cover is Waterproof, very easy to clean, you can simply wipe it up with a damp cloth.
- Protect your table, desk, tablecloth and furniture tops against scratches, scuffs, stains, spillage etc.
- Note: We usually cut a bit larger than actual size to avoid shrinkage caused by shipping, therefore slight size difference is not qualified as a quality issue.
How to Order A Custom Table Protector
1. Follow the template to measure your table.
2. In order to calculate the price, Please choose the option according to the maximum sizes of length and width of the table.
(If the size is non-integer, please round it up. Such as the largest length is 50.2", please go for the option "51". And comment the exact size (e.g. 40.8" x 50.1") when placing an order if you need to cut more precisely.)
3. Leave a message about what shape of your table is and the exact measurement in the comment box.
(If there is no comment in your order, We will make the custom cut according to the option you choose, and the shape and color are Rectangle and Clear.)
* For example, my table shape is Standard Ellipse and I want a frosted one. According to the template, I need to measure AB,BC,DR. (AB-70.1",BC-44.5",DR-10.5"). Then choose Length option "81" (The Largest Length=AB+DR=70.1+10.5=80.6") & Width option "45" (BC--44.5") to place the order. Finally, leave a comment (Standard Ellipse-Frosted, AB-70.1",BC-44.5",DR-10.5").
Though AB-70.1",BC-44.5",DR-10.5", the maximum sizes of length is not AB-70.1", It should be AB plus DR. Please make sure you choose the right option.
Warm Note:
1. We usually cut a bit larger than actual size to avoid shrinkage caused by cutting or packing in shipping, therefore a slight size difference is not qualified as a quality issue.
2. Clear table cover may leave air bubbles on glossy, glass, marble, white or other smooth tops, please place a tablecloth underneath or order frosted table pad by instead.
3. NOT recommend placing it directly on lacquered or newly polished wooden tops because the damp painting may stick to the cover. Before putting it on your lacquered or polished wooden tops, please ensure the painted oils are dry enough.
How to lay it flat on the table when unrolling it?
1. Heat it with a hair dryer and put something heavy on the curled places.
2. Lay it unroll on the sunlight.
3. Soak it in hot water for a few minutes or Use the steam setting on your iron.
4. Lay out in Reverse-Roll direction, use heavy-duty items pressing for days.
1. Follow the template to measure your table.
2. In order to calculate the price, Please choose the option according to the maximum sizes of length and width of the table.
(If the size is non-integer, please round it up. Such as the largest length is 50.2", please go for the option "51". And comment the exact size (e.g. 40.8" x 50.1") when placing an order if you need to cut more precisely.)
3. Leave a message about what shape of your table is and the exact measurement in the comment box.
(If there is no comment in your order, We will make the custom cut according to the option you choose, and the shape and color are Rectangle and Clear.)
* For example, my table shape is Standard Ellipse and I want a frosted one. According to the template, I need to measure AB,BC,DR. (AB-70.1",BC-44.5",DR-10.5"). Then choose Length option "81" (The Largest Length=AB+DR=70.1+10.5=80.6") & Width option "45" (BC--44.5") to place the order. Finally, leave a comment (Standard Ellipse-Frosted, AB-70.1",BC-44.5",DR-10.5").
Though AB-70.1",BC-44.5",DR-10.5", the maximum sizes of length is not AB-70.1", It should be AB plus DR. Please make sure you choose the right option.
Warm Note:
1. We usually cut a bit larger than actual size to avoid shrinkage caused by cutting or packing in shipping, therefore a slight size difference is not qualified as a quality issue.
2. Clear table cover may leave air bubbles on glossy, glass, marble, white or other smooth tops, please place a tablecloth underneath or order frosted table pad by instead.
3. NOT recommend placing it directly on lacquered or newly polished wooden tops because the damp painting may stick to the cover. Before putting it on your lacquered or polished wooden tops, please ensure the painted oils are dry enough.
How to lay it flat on the table when unrolling it?
1. Heat it with a hair dryer and put something heavy on the curled places.
2. Lay it unroll on the sunlight.
3. Soak it in hot water for a few minutes or Use the steam setting on your iron.
4. Lay out in Reverse-Roll direction, use heavy-duty items pressing for days.
Attention CA Residents: Prop 65 Warning
WARNING:
This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov.
Return Policy
Custom item is non-returnable.
Custom Printing & Artwork
This item can be imprinted with a company's name, logo or message. We've got the solution that will exceed your expectations and fit within your budget. Let us help with your needs of custom production, large or small. To discuss your specific needs please Contact Us. If you email, please include the following information to speed up the process: your company name and contact information, logo, order quantity, delivery deadline, and specific needs.
How do I send my artwork?
Click here for all you need to know about sending your logo or artwork to us.
Need more information?
Our staff are available to answer any questions you may have about this item
Our staff are available to answer any questions you may have about this item
Customer Reviews
By Jake
Date: July 22, 2022
Bought one custom made for my coffee area. About 54"x18" - customer service was helpful with placing the order. It was made and delivered in 3 weeks. Placed some heavy cardboard boxes on it to flatten it out and that did the trick. Looks and feels great to protect the surface. I would recommend getting getting it cut 1/8" smaller than you need. This is what I did and fits perfect.
Rating: 
[5 of 5 Stars!]
[5 of 5 Stars!]
Items 1 - 1 of 1 reviews
1