skip to footer block
MIS Motor Guard E 4000S Stripe Eliminator System P3612600MIS-MCE-4000S https://cdnimages.opentip.com/full/MIS/MIS-MCE-4000S.jpg Motor Guard E 4000S Stripe Eliminator System Stripe Eliminator Type Universal Speed 1000 To 1500 RpmFeatures / Benefits Removes stripes and molding adhesives Soft, resilient compound acts like an eraser stripping away material, absorbing heat and leaving the surface like new Universal hardware fits all popular air and electric tools Two sizes to choose from Part Number: E-4000SUNSPSC: 25191700 Specification Order Part Number MCE-4000S Item Desc STRIPE ELIMINATOR SYSTEM MANUFACTURER LONG NAME Motor Guard Corporation MANUFACTURER PART NUMBER E-4000S Product Group Id MC00 Country of Origin US Harmonization Code 39269060 Bin Code AA024 Default Selling Unit EA Catalog Pages(s) 3612600 601965007556 0.4700lbs 0.00 0.00 0.00
Motor Guard
21.5200 2025-03-29 Only 2 left In Stock
customer review - by , February 2, 2015
5/ 5stars
Works as described.
customer review - by , December 12, 2014
4/ 5stars
Did a great job, but is definitely better suited for smaller stripes. We used it to remove letters and branding from a van, so we went through a couple of the wheels. It's messy, but did a pretty good job. Way better than peeling off letters one at a time.
customer review - by , August 8, 2014
4/ 5stars
Seems to do well, but doesn't last long.
customer review - by , July 7, 2014
5/ 5stars
Gets the job done quickly.
customer review - by , May 5, 2014
5/ 5stars
Used it to remove all the pin-striping from a F350 Dually Long-bed. I removed about 50' from the sides and another 10' on the dually fenders in about 45 minutes. I had previously tried a pressure washer and removing them manually with a plastic scraper but it was way to slow and did not remove all the glue residue. This provided a very quick and easy way to remove the pin-stripes. It took about 5 feet before I figured out the correct speed and amount of pressure to use but once I found the sweet spot it was super quick to finish. I found that applying too much pressure or speed caused the wheel to wear very quickly but once I slowed down the speed of the drill and applied light pressure I was able to progress fast with minimal wheel wear. I would say I have enough wheel left to do a small car like a Corolla or something. After I removed the decal I wiped off any left over mess with a microfiber towel and then followed that up with a rag sprayed with WD40. Worked like a champ! No pin-strip no glue residue and didn't even break a sweat.
customer review - by , January 1, 2013
4/ 5stars
I tried using this with an 18V cordless drill and it did not really work. This will work if you use a higher power drill. If you are using it for a whole car, I would buy more than 1.
customer review - by , August 8, 2011
5/ 5stars
Used this to remove worn out dealer-applied pinstripe from my 2008 Honda. You may consider purchasing an additional wheel as this barely lasted to complete the job. I actually had to remove the washers to get the last bit done. I used a wired electric drill. Be fully prepared to use some buffing compound and an orbital sander/buffer to clean up the clear coat. You might be able to do this manually but it would be a lot of work. In the end I had some ghosting in the paint where the pin-strip was (black car). I picked up the same pinstrip out my local auto store and reapplied.

Motor Guard E-4000S Stripe Eliminator System, Price/EACH

stars Rating 5 | 7 reviews
Brand Motor Guard
See other products from MIS

UPC: 601965007556
SKU: MIS-MCE-4000S
Price: $21.52
Quantity:
Only 2 left In Stock
*  Click "Add to Cart" to calculate shipping and delivery time.
Share & Earn 10% Cash Back Best Price in Bulk

Product Description

Price is for EACH.

  • Stripe Eliminator
  • Type Universal
  • Speed 1000 To 1500 Rpm


Features / Benefits
  • Removes stripes and molding adhesives
  • Soft, resilient compound acts like an eraser
  • stripping away material, absorbing heat and leaving the surface like new
  • Universal hardware fits all popular air and electric tools Two sizes to choose from


Part Number: E-4000S

UNSPSC: 25191700


Specification



warning tips WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov.

Product Warranty

Most Air and Power tools have a 90 days to one year warranty. Hand Tools are usually lifetime-abuse voids warranty.

Return Policy

The wearable safety items, like golves, masks, respirators, etc, are non-returnable.
Need more information?
Our staff are available to answer any questions you may have about this item


Look Similar Items By Category


Customer Reviews
5 out of 5
5 stars
4
4 stars
3
3 stars
0
2 stars
0
1 stars
0
By Zenacity "Pilot"
Date: February 04, 2015
Works as described.
Rating: 5 stars [5 of 5 Stars!]
By Reviewer
Date: December 09, 2014
Did a great job, but is definitely better suited for smaller stripes. We used it to remove letters and branding from a van, so we went through a couple of the wheels. It's messy, but did a pretty good job. Way better than peeling off letters one at a time.
Rating: 4 stars [4 of 5 Stars!]
By Mark Hayes
Date: August 01, 2014
Seems to do well, but doesn't last long.
Rating: 4 stars [4 of 5 Stars!]
By Roger
Date: July 14, 2014
Gets the job done quickly.
Rating: 5 stars [5 of 5 Stars!]
By Virginia Slim
Date: May 06, 2014
Used it to remove all the pin-striping from a F350 Dually Long-bed. I removed about 50' from the sides and another 10' on the dually fenders in about 45 minutes. I had previously tried a pressure washer and removing them manually with a plastic scraper but it was way to slow and did not remove all the glue residue. This provided a very quick and easy way to remove the pin-stripes. It took about 5 feet before I figured out the correct speed and amount of pressure to use but once I found the sweet spot it was super quick to finish. I found that applying too much pressure or speed caused the wheel to wear very quickly but once I slowed down the speed of the drill and applied light pressure I was able to progress fast with minimal wheel wear. I would say I have enough wheel left to do a small car like a Corolla or something. After I removed the decal I wiped off any left over mess with a microfiber towel and then followed that up with a rag sprayed with WD40. Worked like a champ! No pin-strip no glue residue and didn't even break a sweat.
Rating: 5 stars [5 of 5 Stars!]
By Kevin M. Stack
Date: January 28, 2013
I tried using this with an 18V cordless drill and it did not really work. This will work if you use a higher power drill. If you are using it for a whole car, I would buy more than 1.
Rating: 4 stars [4 of 5 Stars!]
Items 1 - 6 of 7 reviews
 1  2  [Next]