0 reviews
Be the first to review this item!
Pricing Note
Product Description
Manufacturer Part Number: TiCW 1258Ft
Morel applied their years of experience and creative genius to produce a world-beating sub-bass driver…the Titanium Ultimate 12" subwoofer.
Key Features:
Morel TiCW 1258Ft Titanium Series 12" Subwoofer 8 Ohm
To create their Titanium Ultimate high fidelity 12" subwoofer, Morel began with an extra-large, 5.1" diameter, Hexatech™ aluminum voice coil wound on a vented titanium former. Moving this beast requires huge amounts of magnetic force, so to do so Morel uses a high flux double magnet system.
Speed-robbing energy storage is reduced to an insanely low 0.62 mH through the combination of the titanium former and a copper-sleeved pole piece. Trapped air within the subwoofer is virtually inexistent due to the Uniflow™ cast aluminum chassis, which works with the Accucenter™ self-centering cone assembly to reduce distortion and the effects of power compression.
Morel applied their years of experience and creative genius to produce a world-beating sub-bass driver…the Titanium Ultimate 12" subwoofer.
Key Features:
- Copper-sleeved pole piece and titanium former reduce speed-depleting inductance
- 8 ohm impedance for a high damping factor and more amplifier control
- 5.1" Hexatech voice coil for 600 watts RMS power handling
- Accucenter self-centering, one-piece paper cone assembly
Morel TiCW 1258Ft Titanium Series 12" Subwoofer 8 Ohm
To create their Titanium Ultimate high fidelity 12" subwoofer, Morel began with an extra-large, 5.1" diameter, Hexatech™ aluminum voice coil wound on a vented titanium former. Moving this beast requires huge amounts of magnetic force, so to do so Morel uses a high flux double magnet system.
Speed-robbing energy storage is reduced to an insanely low 0.62 mH through the combination of the titanium former and a copper-sleeved pole piece. Trapped air within the subwoofer is virtually inexistent due to the Uniflow™ cast aluminum chassis, which works with the Accucenter™ self-centering cone assembly to reduce distortion and the effects of power compression.
Product Details | |
|---|---|
| Brand | Morel |
| Model | TiCW 1258Ft |
| Part Number | 297-110 |
| UPC | 848864016306 |
| Unit of Measure | Each |
| Weight | 17.6 |
Product Specifications | |
|---|---|
| Nominal Diameter | 12" |
| Moving Mass Of Diaphragm (Mmd) | 110 |
| Power Handling (RMS) | 600 Watts |
| Power Handling (MAX) | 3000 Watts |
| Impedance | 8Ω |
| Frequency Response | 19 to 2,000Hz |
| Sensitivity | 88dB 2.83V/1m |
| Voice Coil Diameter | 5.1" |
Thiele-Small Parameters | |
|---|---|
| Resonant Frequency (Fs) | 19Hz |
| DC Resistance (Re) | 6.4Ω |
| Voice Coil Inductance (Le) | 0.62mH |
| Mechanical Q (Qms) | 4.03 |
| Electromagnetic Q (Qes) | 0.38 |
| Total Q (Qts) | 0.34 |
| Compliance Equivalent Volume (Vas) | 6.02ft³ |
| BL Product (BL) | 15.25T·m |
| Maximum Linear Excursion (Xmax) | 10.5mm |
| Surface Area of Cone (Sd) | 437cm² |
Materials of Construction | |
|---|---|
| Cone Material | Paper |
| Surround Material | Rubber |
| Voice Coil Wire Material | Aluminum |
| Voice Coil Former | Titanium |
| Basket / Frame Material | Cast Aluminum |
| Magnet Material | Ferrite |
Mounting Information | |
|---|---|
| Overall Outside Diameter | 12.00" |
| Baffle Cutout Diameter | 10.60" |
| Depth | 5.9" |
| # Mounting Holes | 6 |
Optimum Cabinet Size (determined using BassBox 6 Pro High Fidelity suggestion) | |
|---|---|
| Sealed Volume | 1.35ft³ |
| Sealed F3 | 44Hz |
| Vented Volume | 2.88ft³ |
| Vented F3 | 26Hz |
Attention CA Residents: Prop 65 Warning
WARNING:
This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov.
Need more information?
Our staff are available to answer any questions you may have about this item
Our staff are available to answer any questions you may have about this item
Look Similar Items By Category