skip to footer block
MIS Lisle 51450 Harmonic Damper Pulley P3611717MIS-LI51450 https://cdnimages.opentip.com/full/MIS/MIS-LI51450.jpg Lisle 51450 Harmonic Damper Pulley Harmonic Damper Pulley Puller Type Low Profile Packaging Type Clamshell Used For Hrysler, Gm, Mitsubishi And Dodge Low profile design works in confined spaces eliminating the need to remove the radiator Equipped with magnetic jaw spacers for 5.9 liter Dodge New jaw geometry, slimmer magnetic spacers and a fourth rod allow use on 4.2 Liter Trailblazer, Envoy and Bravada \'03 and newer, 4.2 Liter Buick Rainier \'04 and newer, 3.5 Liter Colorado and Canyon \'04 and newer, Hummer H3 \'06 and newer, 2.8 Liter Colorado and Canyon \'05 and newer Jaws are now held in place with a clevis pin and can be removed and replaced easily 3611717 830455145038 3.23lbs 0.00 0.00 0.00
Lisle
82.5300 2023-05-16 Only 1 left In Stock
customer review - by , February 2, 2018
5/ 5stars
Worked great for pulling the harmonic balancer on my 2001 Dodge Ram 1500 5.9l gas engine.
customer review - by , October 10, 2017
5/ 5stars
This puller works like a charm. Only drawback is no hard case so you have to keep up with the parts but you can easily fit it into a small container like a large coffee can or metal lunch box. Lisle makes good products. I have several tools from them and have had no complaints. Makes my job easier every day!
customer review - by , May 5, 2017
5/ 5stars
Life saver, that crankshaft pulley was never going to come off, worked great.
customer review - by , April 4, 2017
5/ 5stars
Great! Used on a 2007 Jeep 4.7, worked awesome. This is the only type that will work on this motor!
customer review - by , March 3, 2017
5/ 5stars
Works perfectly as expected. I used this on a 2001 LQ4 LS engine.
customer review - by , January 1, 2017
5/ 5stars
I am very impressed by the extreme depth of detail provided by this resource. If you are an M-1 Carbine enthusiast and embrace your OCD, then this book is a God-send. Jump in as deep as you want. It's all there. An enjoyable immersion.
customer review - by , November 11, 2016
5/ 5stars
worked great to remove the part I had trouble getting off.
customer review - by , October 10, 2016
5/ 5stars
Excellent product
customer review - by , October 10, 2016
5/ 5stars
used while doing a timing belt/water pump on a 2006 pt cruiser. Other 3 jaw pullers would not budge the crank pulley, this tool had it off in under a minute. Well made and easy to use.
customer review - by , September 9, 2016
5/ 5stars
After searching for months for a tool (tried the in-person Auto Stores and their tool rental programs) that would work on my 2002 Dodge Durango 4.7L engine, I decided to throw in and take a shot with this. I FINALLY was able to get the harmonic balancer off... It WORKED GREAT! It was ridiculous how easy the job was with the right tool. The Lisle 51450 has two additional, longer rods that other similar products do not... and those two longer rods were the key for my Durango. If this review is relevant to you, I thought I would add extra information that might help those looking to work on a 2002 Dodge Durango. You will also need a special tool to install the Harmonic Balancer. When researching online, there is very little information on different tools that work, besides one specialty tool which is impossible to find at local stores and is $125 dollars when you find it online. The crankshaft, which the Harmonic Balancer sits on, has from what I can tell an internal thread that fits a M14 x 1.5 bolt. The bolt that holds the balancer on is around 110mm, so to install it, I am guessing it will take at least a bolt/rod that is 160mm or longer. I recently order an install tool ( Performance Tool W89710 Harmonic Balancer Installer ), and have yet to receive it. If all the information I found is correct, it should work. If it doesn't, the next step will be ordering a threaded rod, cutting it to the length I need, and using nuts and washers to make my own harmonic balancer installer. [Updated as of 9-20-16] As a follow up, the Performance Tool harmonic balancer installer did work.
Share to:

Lisle 51450 Harmonic Damper Pulley, Price/EACH

stars Rating 5 | 13 reviews
Brand Lisle
See other products from MIS

Upc: 830455145038
SKU: MIS-LI51450
List Price: $80.72
Price: $82.53
Quantity:
Only 1 left In Stock
Click "Add to Cart" to calculate shipping and delivery time.
Share & Earn 10% Cash Back Best Price in Bulk

Product Description

Price is for EACH.

  • Harmonic Damper Pulley Puller
  • Type Low Profile
  • Packaging Type Clamshell
  • Used For Hrysler, Gm, Mitsubishi And Dodge


  • Low profile design works in confined spaces eliminating the need to remove the radiator
  • Equipped with magnetic jaw spacers for 5.9 liter Dodge
  • New jaw geometry, slimmer magnetic spacers and a fourth rod allow use on 4.2 Liter Trailblazer, Envoy and Bravada '03 and newer, 4.2 Liter Buick Rainier '04 and newer, 3.5 Liter Colorado and Canyon '04 and newer, Hummer H3 '06 and newer, 2.8 Liter Colorado and Canyon '05 and newer
  • Jaws are now held in place with a clevis pin and can be removed and replaced easily

NOTE: The images are just for your reference. Price is only for Model #: LI51450.

warning tips WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov.

Product Warranty

Most Air and Power tools have a 90 days to one year warranty. Hand Tools are usually lifetime-abuse voids warranty.

Return Policy

The wearable safety items, like golves, masks, respirators, etc, are non-returnable.

You may also like
Need more information?
Our staff are available to answer any questions you may have about this item


Customer Reviews
5 stars
12
4 stars
1
3 stars
0
2 stars
0
1 stars
0
By eric w. trone
Date: February 10, 2018
Worked great for pulling the harmonic balancer on my 2001 Dodge Ram 1500 5.9l gas engine.
Rating: 5 stars [5 of 5 Stars!]
By A Customer
Date: October 23, 2017
This puller works like a charm. Only drawback is no hard case so you have to keep up with the parts but you can easily fit it into a small container like a large coffee can or metal lunch box. Lisle makes good products. I have several tools from them and have had no complaints. Makes my job easier every day!
Rating: 5 stars [5 of 5 Stars!]
By A Customer
Date: May 23, 2017
Life saver, that crankshaft pulley was never going to come off, worked great.
Rating: 5 stars [5 of 5 Stars!]
By Overkill
Date: April 17, 2017
Great! Used on a 2007 Jeep 4.7, worked awesome. This is the only type that will work on this motor!
Rating: 5 stars [5 of 5 Stars!]
By DesertScottAZ
Date: March 15, 2017
Works perfectly as expected. I used this on a 2001 LQ4 LS engine.
Rating: 5 stars [5 of 5 Stars!]
By A Customer
Date: January 29, 2017
I am very impressed by the extreme depth of detail provided by this resource. If you are an M-1 Carbine enthusiast and embrace your OCD, then this book is a God-send. Jump in as deep as you want. It's all there. An enjoyable immersion.
Rating: 5 stars [5 of 5 Stars!]
Items 1 - 6 of 13 reviews
 1  2  3  [Next]