0 reviews
Be the first to review this item!
Share to:
Product Description
15m Premium Super Long Distance Single Link DVI-D Cable
Features & Specifications
LINDY Super Long Distance DVI cables use a specially developed and optimized cable material that allows longer cable distances than the 7.5m maximum recommendation laid down by the DDWG (Digital Display Working Group).
Just one of our huge range of DVI cables and DVI cables, which also includes Premium Gold DVI-D Super Long Distance cables and DVI cables with analog support.
Please note: Maximum supported distances and resolutions are dependent on both the monitor and the chipset used in the graphics card. The following example shows the maximum values from a test with a Belinea 1280 x 1024 DVI flat panel display and two different graphics cards (ATI Radeon 7000 and NVidea 5200).
As a general rule, the newer the hardware used, the longer the distance and the higher the supported resolution.
See our DVI Guide for assistance.
Features of the RF-BLOK shielded design:
- DVI-D Single Link Cable
- For use with all modern digital monitors, projectors and TFT/LCD Flat Panel Displays
- UXGA (1600 x 1200) and HDTV1080i (1920 x 1080) compatible
- Patent pending, RF-BLOK shielded design
- Connectors: DVI-D Single Link Male to DVI-D Single Link Male
- 10 Year Warranty
Features & Specifications
LINDY Super Long Distance DVI cables use a specially developed and optimized cable material that allows longer cable distances than the 7.5m maximum recommendation laid down by the DDWG (Digital Display Working Group).
Just one of our huge range of DVI cables and DVI cables, which also includes Premium Gold DVI-D Super Long Distance cables and DVI cables with analog support.
Please note: Maximum supported distances and resolutions are dependent on both the monitor and the chipset used in the graphics card. The following example shows the maximum values from a test with a Belinea 1280 x 1024 DVI flat panel display and two different graphics cards (ATI Radeon 7000 and NVidea 5200).
As a general rule, the newer the hardware used, the longer the distance and the higher the supported resolution.
| LINDY SLD cable length | Max. resolution using a 2004 Belinea TFT (1280 x 1024 native resolution) | Max. resolution using a 2006 Dell TFT (1920 x 1200 native resolution) |
| 20m | 1280 x 1024 @ 60Hz | 1920 x 1200 @ 60Hz |
| 25m | 1024 x 768 @ 60Hz | 1600 x 1200 @ 60Hz |
See our DVI Guide for assistance.
Features of the RF-BLOK shielded design:
- Reduced interference from one piece EMI (Electromagnetic Interference)/RFI (Radio Frequency Interference) shield
- Increased insulation resistance up to 25%
- No soldering requirements as interconnect design needs no 360 degree soldering - eliminating the possibility of human error and/or cracking of the solder that causes grounding intermittence and the use of the most hazardous waste material - soldering flux
- Tight fit of internal wires as there is no inner mold
- No requirement of ferrite cores as signal loss and degradation are greatly reduced giving enhanced signal sharpness. Without the ferrite cores the cable is less stressed and more flexible
- Smaller overall dimensions which allows more room behind the host or peripheral
- Increased connector and mating strength - the 4 point reinforcement tabs on the RF-BLOK, attached to the connector, strengthens the pair as one
This item is overweight and doesn't qualify for Free Shipping at some states, please contact us to confirm or we may contact you when processing order.
Attention CA Residents: Prop 65 Warning
WARNING:
This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov.
Return Policy
Return could only be applied within 7 days after delivery.
Need more information?
Our staff are available to answer any questions you may have about this item
Our staff are available to answer any questions you may have about this item
Look Similar Items By Category