0 reviews
Be the first to review this item!
Product Description
Manufacturer Part Number: P-GPL1
Surfaces: Granite and Engineered Stone
Coverage: 200-400 sq ft. per lb.
Result: Polished Shine
PRODUCT FEATURES:
Increases the natural color and reflectivity of polished granite
Removes light scratches and damage
INSTRUCTIONS:
Requirements: StonePro Maintenance Crystallizer, steel wool pads or felt pads, backer pad and 600-700 RPM hand-held polishing machine or StonePro Floor Polishing Machine for larger areas.
1) Sprinkle powder onto surface - use 1-2 oz. of powder to polish 15-20 sq. ft. 2) Spray 2-4 oz of StonePro Marble Polish Maintenance Crystallizer over powder 3) Using the polishing machine, slowly rotate outward in a circular motion. 4) Continue polishing until powder begins to dry 5) Re-wet powder by spraying more Maintenance Crystallizer on the surface 6) Repeat until desired polish is achieved 7) Wipe off access residue
Please note: Steel wool pads are used to generate the heat necessary to create a polish. Over-used or saturated pads will no longer create the desired results. Flip pad often to extend use. One steel wool pad will usually cover 150 -200 sq. ft. Used steel wool will rust which will result in damage to the surface - do not reuse steel wool pads.
-RU54e1.jpg)
Quick Overview
- Removes light scratches and damage
- Increases the natural color and reflectivity of polished granite
Surfaces: Granite and Engineered Stone
Coverage: 200-400 sq ft. per lb.
Result: Polished Shine
PRODUCT FEATURES:
Increases the natural color and reflectivity of polished granite
Removes light scratches and damage
INSTRUCTIONS:
Requirements: StonePro Maintenance Crystallizer, steel wool pads or felt pads, backer pad and 600-700 RPM hand-held polishing machine or StonePro Floor Polishing Machine for larger areas.
1) Sprinkle powder onto surface - use 1-2 oz. of powder to polish 15-20 sq. ft. 2) Spray 2-4 oz of StonePro Marble Polish Maintenance Crystallizer over powder 3) Using the polishing machine, slowly rotate outward in a circular motion. 4) Continue polishing until powder begins to dry 5) Re-wet powder by spraying more Maintenance Crystallizer on the surface 6) Repeat until desired polish is achieved 7) Wipe off access residue
Please note: Steel wool pads are used to generate the heat necessary to create a polish. Over-used or saturated pads will no longer create the desired results. Flip pad often to extend use. One steel wool pad will usually cover 150 -200 sq. ft. Used steel wool will rust which will result in damage to the surface - do not reuse steel wool pads.
-RU54e1.jpg)
| sds_StonePro-Granite-Potea.pdf |
NOTE: Price is only for Model #:81-149
Attention CA Residents: Prop 65 Warning
WARNING:
This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov.
Need more information?
Our staff are available to answer any questions you may have about this item
Our staff are available to answer any questions you may have about this item
Look Similar Items By Category