0 reviews
Be the first to review this item!
Product Description
Manufacturer Part Number: 2051-4
Insert pick-up tube into the WINSOL Deep Clean container. Turn water valve to the "on" position and adjust the metering valve to optimum cleaning level (refer to manufacturer's recommendations to start). Clean each awning from the bottom to the top for best results and to prevent streaking. Turn metering valve off and use the clear water to rinse. Always rinse immediately to avoid streaking.
?
Cleaning coverage is about 5,000 to 7,000 square feet per gallon.
Hand Cleaning:
Mix 8 ounces of Deep Clean into 1 gallon of water. Using a brush of medium stiffness or an awning sponge, gently but firmly scrub awning from the bottom to top. Rinse immediately with clear water.
?Cleaning coverage is about 5,000 to 7,000 square feet per gallon.
Foam Generating Systems:
Mix 2 to 4 ounces of Deep Clean per gallon of water in the holding tank. Lay out foam in an even pattern using brush to spread the foam. Allow to stand on awning surface for 3 to 5 minutes. Scrub with brush as required and rinse.
Recommended after care:
For vinyl awnings: WINSOL Awning Armor can be applied to reseal the vinyl and extend the life of the awning.
For open weave fabric awnings: WINSOL Awning Guard 690++ can be applied as a very effective water and stain repellent. ???
Safe for removing most heavy soils and streaking.
Effective on both vinyls and woven fabrics.
Will not pull color from inked awnings and restores original beauty.
Completely goof-proof: won't harm the most delicate fabrics.
Can be applied using water-fed pole systems.
Mix 2 to 4 ounces per gallon of water
One gallon cover 5,000 - 7,000 sq ft.
1 gallon bottle.
Quick Overview
- Safe for removing most heavy soils and streaking.
- Mix 2 to 4 ounces per gallon of water
- One gallon cover 5,000 - 7,000 sq ft.
- 1 gallon bottle.
Insert pick-up tube into the WINSOL Deep Clean container. Turn water valve to the "on" position and adjust the metering valve to optimum cleaning level (refer to manufacturer's recommendations to start). Clean each awning from the bottom to the top for best results and to prevent streaking. Turn metering valve off and use the clear water to rinse. Always rinse immediately to avoid streaking.
?
Cleaning coverage is about 5,000 to 7,000 square feet per gallon.
Hand Cleaning:
Mix 8 ounces of Deep Clean into 1 gallon of water. Using a brush of medium stiffness or an awning sponge, gently but firmly scrub awning from the bottom to top. Rinse immediately with clear water.
?Cleaning coverage is about 5,000 to 7,000 square feet per gallon.
Foam Generating Systems:
Mix 2 to 4 ounces of Deep Clean per gallon of water in the holding tank. Lay out foam in an even pattern using brush to spread the foam. Allow to stand on awning surface for 3 to 5 minutes. Scrub with brush as required and rinse.
Recommended after care:
For vinyl awnings: WINSOL Awning Armor can be applied to reseal the vinyl and extend the life of the awning.
For open weave fabric awnings: WINSOL Awning Guard 690++ can be applied as a very effective water and stain repellent. ???
Safe for removing most heavy soils and streaking.
Effective on both vinyls and woven fabrics.
Will not pull color from inked awnings and restores original beauty.
Completely goof-proof: won't harm the most delicate fabrics.
Can be applied using water-fed pole systems.
Mix 2 to 4 ounces per gallon of water
One gallon cover 5,000 - 7,000 sq ft.
1 gallon bottle.
| SDS Sheet | ||
NOTE: Price is only for Model #: 88-641.
Attention CA Residents: Prop 65 Warning
WARNING:
This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov.
Need more information?
Our staff are available to answer any questions you may have about this item
Our staff are available to answer any questions you may have about this item