skip to footer block
MOJ Humbucker Bobbin Screw Side White 50mm P11543477MOJ-2115426 https://cdnimages.opentip.com/full/MOJ/MOJ-2115426.jpg Humbucker Bobbin Screw Side White 50mm Humbucker Bobbin Screw Side White 50mm 11543477 0.01lbs 0.00 0.00 0.00
0.97 2023-09-29 268 In Stock
customer review - by , April 4, 2022
5/ 5stars
All three pickups measured at 52mm, contrary to them supposedly being staggered.The ohm measurements were off as well: 5.5k, 6.7k, 5.7k.And finally, they didn't mount centered in a couple pickguards I had, all three rubbing against one edge pretty heavily- all without a cover.
customer review - by , February 2, 2022
5/ 5stars
These pickups are great, they are easy to install if you have some experience with soldering, the pole spacing is off though I got official fender pickup covers and they did not fit over them, I would buy these again if I have another project.
customer review - by , January 1, 2022
5/ 5stars
So I installed these in an IYV Mustang Copy. The originals were very harsh sounding. So I figured I would try these for 20 bucks. These smoothened the tone out and the harshness went away. So far I am pretty happy with these. It's only a $130 guitar so putting a few dollars in it doesn't seem so bad.
customer review - by , January 1, 2022
5/ 5stars
Bought for a Squire Affinity but ended up putting them in a very old parts caster and have gigged with it. A very decent product for an amazing price. (Need another set for the Squire)
customer review - by , October 10, 2021
4/ 5stars
Hot wound inespensive ALNICO's are pretty common so I was pretty excited to see these supposedly vintage wound pickups. No luck there. These things are 8.6 to 9k. I already have a set like these so these are useless to me.
customer review - by , June 6, 2021
5/ 5stars
Great value for the tiny amount they cost. I put them in a Squier Bullet Strat, and they're a big improvement over the stock ceramics. They excell at chime if you're looking for that, they don't have much fatness in the low mids and bass. I roll my tone knobs down to about 4 or 5 and they're more to my liking. I might try a .1uf cap instead of the .047 one I have to see if that tames the brightness better for me. They're pretty hot as well. For the pennys paid, it's hard to complain too much.
customer review - by , June 6, 2021
5/ 5stars
Found a Starcaster strat to use as a modding platform and used these pickups. Couldn't exactly see breaking the bank on a $35 thrift store find by using Duncans, Fralins, etc. Those are excellent pickups, just too expensive for this kind of build. I ran across a video on You Tube by Darrell Braun who compared the least expensive Alnico pickups (these) vs the most expensive Seymour Duncans ($1000). All I can say is watch the video with a good set of headphones on. Some reviewers complain about the length of wiring, but there is just enough wire and my guitar didn't have a swimming pool route; they gotta cut cost somewhere. I did not get covers with mine as some have reported, but when you order covers make sure you get the ones for 48, 50, 52 mm pickups otherwise you'll be reordering. These are much better than the stock ceramics I replaced. My guitar player buddy can't believe they're not $200 pickups.
customer review - by , May 5, 2021
5/ 5stars
I was shocked at how great these sound. I started out building a parts guitar with the cheapest parts I could find as a fun project. When I fired up the guitar I was amazed. I have another strat with custom shop pickups in it and I'm thinking about selling those to put another set of these in and pocket the change.
customer review - by , May 5, 2021
4/ 5stars
Don't expect boutique sound, but they are pretty darn good for what they are and the price is good on these too. I installed them and they sound very good - not great - but very good. Keep in mond I am commparing these to some of the best Strat pickups I have heard in USA strats and custom shop too..... worth the money.
customer review - by , April 4, 2021
5/ 5stars
For the price I wasn't expecting much, but these so far have impressed me, and will probably be staying on my strat for awhile. One thing to note, my neck pickup was wound with blue copper, which I find cool, and if all 3 were done with the blue copper I would have loved that, but if that's not your thing, it's something to possibly be aware of.
Share to:

Humbucker Bobbin Screw Side White 50mm

stars Rating 5 | 25 reviews
See other products from MOJ

SKU: MOJ-2115426
Price: $0.97
Buy in bulk & save 5% ($0.92 each)
Quantity:
268 In Stock
*  Click "Add to Cart" to calculate shipping and delivery time.
Share & Earn 10% Cash Back Best Price in Bulk
Price: $0.97 ea X 1 qty = $0.97
Quantity Price Save
1+ $0.97 0%
10+ $0.92 5%
This item is excluded from use of other offer, discount or coupon.

Product Description

Humbucker Bobbin Screw Side White 50mm

warning tips WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov.

Return Policy

All MOJ- items are non-returnable.
Need more information?
Our staff are available to answer any questions you may have about this item


Look Similar Items By Category


Customer Reviews
5 stars
20
4 stars
5
3 stars
0
2 stars
0
1 stars
0
By Alex
Date: April 14, 2022
All three pickups measured at 52mm, contrary to them supposedly being staggered.The ohm measurements were off as well: 5.5k, 6.7k, 5.7k.And finally, they didn't mount centered in a couple pickguards I had, all three rubbing against one edge pretty heavily- all without a cover.
Rating: 5 stars [5 of 5 Stars!]
By Noah D.
Date: February 23, 2022
These pickups are great, they are easy to install if you have some experience with soldering, the pole spacing is off though I got official fender pickup covers and they did not fit over them, I would buy these again if I have another project.
Rating: 5 stars [5 of 5 Stars!]
By Teleplayer51
Date: January 30, 2022
So I installed these in an IYV Mustang Copy. The originals were very harsh sounding. So I figured I would try these for 20 bucks. These smoothened the tone out and the harshness went away. So far I am pretty happy with these. It's only a $130 guitar so putting a few dollars in it doesn't seem so bad.
Rating: 5 stars [5 of 5 Stars!]
By A Customer
Date: January 02, 2022
Bought for a Squire Affinity but ended up putting them in a very old parts caster and have gigged with it. A very decent product for an amazing price. (Need another set for the Squire)
Rating: 5 stars [5 of 5 Stars!]
By MoCatz187
Date: October 26, 2021
Hot wound inespensive ALNICO's are pretty common so I was pretty excited to see these supposedly vintage wound pickups. No luck there. These things are 8.6 to 9k. I already have a set like these so these are useless to me.
Rating: 4 stars [4 of 5 Stars!]
By Aaron J. Oster
Date: June 16, 2021
Great value for the tiny amount they cost. I put them in a Squier Bullet Strat, and they're a big improvement over the stock ceramics. They excell at chime if you're looking for that, they don't have much fatness in the low mids and bass. I roll my tone knobs down to about 4 or 5 and they're more to my liking. I might try a .1uf cap instead of the .047 one I have to see if that tames the brightness better for me. They're pretty hot as well. For the pennys paid, it's hard to complain too much.
Rating: 5 stars [5 of 5 Stars!]
Items 1 - 6 of 25 reviews
 1  2  3  4  5  [Next]