skip to footer block
MIS Gemtex Surf Prep X Crse 2" Typr Brown 50/Box P7256373MIS-GT25120803 https://cdnimages.opentip.com/full/MIS/MIS-GT25120803.jpg Gemtex Surf Prep X Crse 2" Typr Brown 50/Box Surface Conditioning Disc Type Type R, Plastic Roll-On Locking Style, Non-Woven Diameter 2 Inch Grit Extra Coarse Backing Material Woven Color Brown Application Deburring, Blending Coarse Abrasive Scratches And Removing Rust, Corrosion, Oxide, Paint, Adhesives And Gasket Attachment Type Hook And Loop SURFACE FINISHING - The Flex-Hone Tool is available in a variety of abrasive types and grit selections to provide the optimum surface finish on any base material The Flex-Hone is commonly used to reduce Ra, Rk and Rpk values while maintaining Rvk and Vo volume for oil retention Using the Flex-Hone Tool for surface finishing allows the sizing tools to do their jobs quickly and accurately without fighting surface finish The Flex-Hone is also used in adhesive bonding applications where a rougher surface is desired for bonding integrity DEBURRING - Debarring of cross drilled holes is an expensive, time consuming operation. The Flex-Hone Tool can be used to remove burrs from cross drilled holes leaving a clean, radiused intersection Because of its unique construction, the Flex-Hone can be used online in machine tool applications or offline as a secondary operation The tool is self-cantering and self-aligning to the bore so elaborate, rigid set-ups are not required It is advisable to use the tool in the main bore into which the cross holes break Best results are obtained by rotating and stroking the tool a few strokes in a clockwise direction, removing the tool from the part, reversing the spindle and then rotating and stroking the tool in a counter clockwise direction for a few more strokes This forward and reverse rotation creates a more symmetrical debarring pattern PLATEAU FINISHING - Brush Research pioneered the concept of a plateau finish and is a strong proponent of the benefits of a cross hatch, plateaued finish The concept involves removing the peaks produced by prior machining operations and creating a substantially flat or plateau finish A plateau finish created by the elimination of peaks allows rings and seals to seat without damaging their edges The cross hatch pattern will aid in lubrication control and retention, reduce seepage in hydraulic and pneumatic applications and promote longer seal life Additional Specification Sheet 7256373 3.10lbs 0.00 0.00 0.00
Gemtex
34.5000 2023-07-06 Only 1 left In Stock
Share to:

Gemtex Surf Prep X Crse 2" Typr Brown (50/Box), Price/BX

Brand Gemtex
See other products from MIS

SKU: MIS-GT25120803
List Price: $39.64
Price: $34.50
You Save: $5.14 (13%)
Quantity:
Only 1 left In Stock
Click "Add to Cart" to calculate shipping and delivery time.
Share & Earn 10% Cash Back Best Price in Bulk

Optional related products

Product Description

Price is for BX.

  • Surface Conditioning Disc
  • Type Type R, Plastic Roll-On Locking Style, Non-Woven
  • Diameter 2 Inch
  • Grit Extra Coarse
  • Backing Material Woven
  • Color Brown
  • Application Deburring, Blending Coarse Abrasive Scratches And Removing Rust, Corrosion, Oxide, Paint, Adhesives And Gasket
  • Attachment Type Hook And Loop


  • SURFACE FINISHING - The Flex-Hone Tool is available in a variety of abrasive types and grit selections to provide the optimum surface finish on any base material
  • The Flex-Hone is commonly used to reduce Ra, Rk and Rpk values while maintaining Rvk and Vo volume for oil retention
  • Using the Flex-Hone Tool for surface finishing allows the sizing tools to do their jobs quickly and accurately without fighting surface finish
  • The Flex-Hone is also used in adhesive bonding applications where a rougher surface is desired for bonding integrity
  • DEBURRING - Debarring of cross drilled holes is an expensive, time consuming operation. The Flex-Hone Tool can be used to remove burrs from cross drilled holes leaving a clean, radiused intersection
  • Because of its unique construction, the Flex-Hone can be used online in machine tool applications or offline as a secondary operation
  • The tool is self-cantering and self-aligning to the bore so elaborate, rigid set-ups are not required
  • It is advisable to use the tool in the main bore into which the cross holes break
  • Best results are obtained by rotating and stroking the tool a few strokes in a clockwise direction, removing the tool from the part, reversing the spindle and then rotating and stroking the tool in a counter clockwise direction for a few more strokes
  • This forward and reverse rotation creates a more symmetrical debarring pattern
  • PLATEAU FINISHING - Brush Research pioneered the concept of a plateau finish and is a strong proponent of the benefits of a cross hatch, plateaued finish
  • The concept involves removing the peaks produced by prior machining operations and creating a substantially flat or plateau finish
  • A plateau finish created by the elimination of peaks allows rings and seals to seat without damaging their edges
  • The cross hatch pattern will aid in lubrication control and retention, reduce seepage in hydraulic and pneumatic applications and promote longer seal life



NOTE: The images are just for your reference. Price is only for Model #: GT25120803.

warning tips WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov.

Return Policy

The wearable safety items, like golves, masks, respirators, etc, are non-returnable.
Need more information?
Our staff are available to answer any questions you may have about this item


Customer Reviews
0 reviews
Be the first to review this item!