0 reviews
Be the first to review this item!
Furman M-8x2 Power Conditioner 15A
Brand Furman Sound
See other products from PEX
* Click "Add to Cart" to calculate shipping and delivery time.
Pricing Note
Product Description
Manufacturer Part Number: M-8x2
A Merit Series power conditioner is the perfect low-cost AC power solution for any rack mount system. Install an M-8x2 in to the top slot of your rack, and the eight switched outlets in the rear panel will power up and protect all your equipment up to a 15-amp load.
Key Features:
Furman M-8x2 Power Conditioner 15A
A Merit Series power conditioner is the perfect low-cost AC power solution for any rack mount system. Install an M-8x2 in to the top slot of your rack, and the eight switched outlets in the rear panel will power up and protect all your equipment up to a 15-amp load.
Specifications: Maximum output current: 15 amps Line cord: 6 ft., captive, 14 AWG, with 3-conductor Edison plug Operating voltage: 120 VAC, 60 Hz Spike protection mode: Line to neutral Energy dissipation: 170 joules Peak impulse current: 12,000 amps Maximum continuous operating voltage: 130 VAC RMS Let-through voltage (@ 125 amps, 8/20uS waveform): 400 volts Noise attenuation: Transverse mode: >23 dB, 200 kHz to 10 MHz Dimensions: 1.75" H x 19" W x 3.75" D Weight: 4.9 lbs. Safety agency listing: cTUVus Three-year limited manufacturer's warranty.
Applications
Instrument Rigs
You've got a rack for your effects, preamps, tuner...You're going to plug that into the wall? One big spike and your rig is up in smoke. Furman's standard level surge/spike protection defends your gear from the spikes and surges that are so common at gigs and practice spots. With Furman's standard level RFI/EMI filtration, you'll get a quieter tone without pops, crackles, and the local radio station coming out of your amp.
Recording
Can't track down where that noise is coming from? Your mix sounding flat? With Furman's standard level RFI/EMI filtration you'll lower the noise floor caused by the dirty AC power coming into your console or DAW. Furman's standard level surge and spike protection keeps your sensitive digital equipment from acting funny or burning up due to everyday spikes and surges. With a 15A capacity and nine total outlets, it's enough to power your whole home studio.
DJ Equipment
Bars, clubs and other event venues have some of the worst power out there-from air compressors turning on and off to light shows pulling current loads up and down, the AC power can be a strain on the circuits in your rig. Furman's standard level protection and filtration keeps the bad stuff out.
Pro Audio
When you're out there gigging, you never know what kind of power you're going to get. The wear and tear on mobile rigs eventually takes it toll - that's why it's smart to plug into Furman's standard level protection and RFI/EMI filtration. It keeps your equipment safe and sounding clean. Whether you're setting up a show at the local club or powering up the church band for their next service, make sure you give them power they can trust.
A Merit Series power conditioner is the perfect low-cost AC power solution for any rack mount system. Install an M-8x2 in to the top slot of your rack, and the eight switched outlets in the rear panel will power up and protect all your equipment up to a 15-amp load.
Key Features:
- AC noise filtering to reduce radio frequency and electromagnetic interference (RFI/EMI)
- Spike & surge protection ensures equipment stays safe and your power stays clean
- 9 total outlets - 8 rear panel outlets and 1 front panel outlet
- 15 amp rating, with circuit breaker
- Front panel indicator LED lets you know that your equipment is being protected
- Rear outlets have been spaced to accommodate even the bulkiest of wall warts and adapters
Furman M-8x2 Power Conditioner 15A
A Merit Series power conditioner is the perfect low-cost AC power solution for any rack mount system. Install an M-8x2 in to the top slot of your rack, and the eight switched outlets in the rear panel will power up and protect all your equipment up to a 15-amp load.
Specifications: Maximum output current: 15 amps Line cord: 6 ft., captive, 14 AWG, with 3-conductor Edison plug Operating voltage: 120 VAC, 60 Hz Spike protection mode: Line to neutral Energy dissipation: 170 joules Peak impulse current: 12,000 amps Maximum continuous operating voltage: 130 VAC RMS Let-through voltage (@ 125 amps, 8/20uS waveform): 400 volts Noise attenuation: Transverse mode: >23 dB, 200 kHz to 10 MHz Dimensions: 1.75" H x 19" W x 3.75" D Weight: 4.9 lbs. Safety agency listing: cTUVus Three-year limited manufacturer's warranty.
Applications
Instrument Rigs
You've got a rack for your effects, preamps, tuner...You're going to plug that into the wall? One big spike and your rig is up in smoke. Furman's standard level surge/spike protection defends your gear from the spikes and surges that are so common at gigs and practice spots. With Furman's standard level RFI/EMI filtration, you'll get a quieter tone without pops, crackles, and the local radio station coming out of your amp.
Recording
Can't track down where that noise is coming from? Your mix sounding flat? With Furman's standard level RFI/EMI filtration you'll lower the noise floor caused by the dirty AC power coming into your console or DAW. Furman's standard level surge and spike protection keeps your sensitive digital equipment from acting funny or burning up due to everyday spikes and surges. With a 15A capacity and nine total outlets, it's enough to power your whole home studio.
DJ Equipment
Bars, clubs and other event venues have some of the worst power out there-from air compressors turning on and off to light shows pulling current loads up and down, the AC power can be a strain on the circuits in your rig. Furman's standard level protection and filtration keeps the bad stuff out.
Pro Audio
When you're out there gigging, you never know what kind of power you're going to get. The wear and tear on mobile rigs eventually takes it toll - that's why it's smart to plug into Furman's standard level protection and RFI/EMI filtration. It keeps your equipment safe and sounding clean. Whether you're setting up a show at the local club or powering up the church band for their next service, make sure you give them power they can trust.
Product Details | |
|---|---|
| Brand | Furman Sound |
| Model | M-8x2 |
| Part Number | 248-783 |
| UPC | 654061028307 |
| Unit of Measure | Each |
| Weight | 6.1 |
Product Specifications | |
|---|---|
| Color | Black |
| Cord Length | 6' |
| Number of Outlets | 9 |
| Special Features | Rack Mountable |
Attention CA Residents: Prop 65 Warning
WARNING:
This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov.
Shipping Restrictions
This product can't be shipped to Canada, Australia, United Kingdom, APO addresses or the following regions: HI, AK, PR.
Need more information?
Our staff are available to answer any questions you may have about this item
Our staff are available to answer any questions you may have about this item
Look Similar Items By Category