0 reviews
Be the first to review this item!
Pricing Note
Product Description
Manufacturer Part Number: HF140
For a high output compression driver to be used for the critical midrange (vocals), choose FaitalPRO's HF140 1.4" titanium compression driver. A radial neodymium slug motor focuses magnet flux into the gap while keeping driver weight below 7 pounds. 16 ohm impedance for line array use.
Key Features:
FaitalPRO HF140 1.4" Neodymium Compression Horn Driver 16 Ohm 4-Bolt
FailtalPRO's HF140 1.4" compression horn driver uses a radial neodymium slug motor design to pack as much BL product into the voice coil gap as possible. When combined with the titanium dome diaphragm, the HF140 produces crisp sound over a broad range (from 500 to 18,000 Hz) with an emphasis on the critical midrange.
The high energy motor is also response for output up to 111 dB with only one watt of input power, with a 109 dB average sensitivity, while keeping the total weight of the driver under seven pounds. Built with an annular phase plug. The 16 ohm impedance is great for line array use where multiple drivers are used together. Made in Italy.
Specifications: Power handling: 50 watts RMS (above 650 Hz), 70 watts RMS (above 900 Hz) with recommended crossover of 900 Hz, 12 dB/octave slope VCdia: 2.91" Impedance: 16 ohms Frequency response: 500-18,000 Hz SPL: 109 dB 1W/1m Dimensions: 5.14" diameter x 2.44" depth Bolt pattern: 4 x M6 Weight: 6.40 lbs.
For a high output compression driver to be used for the critical midrange (vocals), choose FaitalPRO's HF140 1.4" titanium compression driver. A radial neodymium slug motor focuses magnet flux into the gap while keeping driver weight below 7 pounds. 16 ohm impedance for line array use.
Key Features:
- Neo radial motor design for light weight and high output
- Titanium dome diaphragm for crisp output with a focus on vocals
- Large voice coil for high power handling
- Wide band 500 Hz to 18,000 Hz frequency response
- 16 ohm impedance for line array use
- Made in Italy
FaitalPRO HF140 1.4" Neodymium Compression Horn Driver 16 Ohm 4-Bolt
FailtalPRO's HF140 1.4" compression horn driver uses a radial neodymium slug motor design to pack as much BL product into the voice coil gap as possible. When combined with the titanium dome diaphragm, the HF140 produces crisp sound over a broad range (from 500 to 18,000 Hz) with an emphasis on the critical midrange.
The high energy motor is also response for output up to 111 dB with only one watt of input power, with a 109 dB average sensitivity, while keeping the total weight of the driver under seven pounds. Built with an annular phase plug. The 16 ohm impedance is great for line array use where multiple drivers are used together. Made in Italy.
Specifications: Power handling: 50 watts RMS (above 650 Hz), 70 watts RMS (above 900 Hz) with recommended crossover of 900 Hz, 12 dB/octave slope VCdia: 2.91" Impedance: 16 ohms Frequency response: 500-18,000 Hz SPL: 109 dB 1W/1m Dimensions: 5.14" diameter x 2.44" depth Bolt pattern: 4 x M6 Weight: 6.40 lbs.
Product Details | |
|---|---|
| Brand | FaitalPRO |
| Model | HF140 |
| Part Number | 294-1026 |
| UPC | 848864011455 |
| Unit of Measure | Each |
| Weight | 7.1 |
Product Specifications | |
|---|---|
| Diaphragm Material | Titanium |
| Exit Diameter | 1.4" |
| Mounting Type | 4-Bolt |
| Power Handling (RMS) | 70 Watts |
| Impedance | 16Ω |
Attention CA Residents: Prop 65 Warning
WARNING:
This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov.
Need more information?
Our staff are available to answer any questions you may have about this item
Our staff are available to answer any questions you may have about this item
Look Similar Items By Category