skip to footer block
EGG Dogbone Controller for NES Tomee P1541705EGG-M05179 https://cdnimages.opentip.com/full/EGG/EGG-M05179.jpg Dogbone Controller for NES Tomee Manufacturer Part Number: M05179Quick Overview:The Tomee Dogbone Controller for NES gives you the same classic feel of your favorite retro controller and reduces thumb and hand fatigue with its comfortable ergonomic design. DetailsThe Tomee Dogbone Controller for NES gives you the same classic feel of your favorite retro controller and reduces thumb and hand fatigue with its comfortable ergonomic design. It\'s an ideal replacement for a broken or lost controller.Product FeaturesCompatible with all NES modelsComfortable ergonomic shapeEight-way directional padTwo face buttons6 ft. cable length 1541705 813048010234 0.30lbs 0.00 0.00 0.00
Tomee
3.4200 2024-03-30 In Stock
customer review - by , March 3, 2022
4/ 5stars
I purchased two of these on accident. I am glad I did, because each one had a problem and being able to compare them side-by-side allowed me to not overreact to it.The first controller had great feeling buttons, but had an issue with the connecting cable. Inside the main cable of the controller are a group of wires, and that housing cable (the one you typically see, the big black one) was pulled out of the controller showing the individual wires and leaving them exposed and vulnerable to damage.The second controller had really lackluster button feel, but the cord cover was correctly in place. I decided to do a little controller surgery and see what I could find. I opened the one with the cord issue first and saw the layout, and then opened the other one to see how it compared. I could see immediately how the cable was routed and how it should have been held in place inside the controller, but had slipped out of place. This took a few seconds to fix, and then I looked at the buttons on each one.Most people who crack open controllers are used to larger one-piece rubber membranes which cover the button and provide the continuity through the tiny carbon pad to make the connection go live. That is what makes the action on screen. These controllers instead have separate tiny silicone (I suppose) membranes for each button. I could see how they sat on the one with great button press, and how on the one with mushy buttons they were not sitting correctly. I popped the membrane out, turned it to the right orientation, and reassembled. Perfect.overall quality control might be a bit lax here, or I could have just received two with issues randomly. Even if I had to cannibalize two controllers to make one that was perfect, it would have been half the price of the official Nintendo dogbone controller and that would have been acceptable to me.
customer review - by , September 9, 2021
4/ 5stars
It works pretty good for the nes and 3rd party console
customer review - by , March 3, 2020
5/ 5stars
I was Very excited to use this, because growing up, and even today, I had not ever heard of it! Now, after only using this NES controller once, I probably will not ever, go back to the square NES one lol!
customer review - by , March 3, 2020
4/ 5stars
I had an authentic dogbone controller with a fully intact shell, but a destroyed cord. Unlike the original NES controller, the Dogbone controller featured a modular cord which plugged into the PCB inside the controller, whereas the original was soldered on. I bought this hoping that I could either take the modular plug or far more likely take the entire PCB with soldered cord and transplant it into my authentic dogbone shell... NOPE.. Inside this thing is nothing like the authentic dogbone - the PCB will not fit inside an authentic shell... So I was stuck reselling this thing as is.. fortunately though it was an easy sell because there are lots of toploaders out there in need of dogbones!!
customer review - by , January 1, 2020
5/ 5stars
Works great!

Dogbone Controller for NES - Tomee

stars Rating 4.5 | 5 reviews
Brand Tomee
See other products from EGG

UPC: 813048010234
SKU: EGG-M05179
List Price: $9.99
Price: $3.42
You Save: $6.57 (66%)
Quantity:
In Stock
*  Click "Add to Cart" to calculate shipping and delivery time.
Share & Earn 10% Cash Back Best Price in Bulk

Product Description

Manufacturer Part Number: M05179

Quick Overview:

The Tomee Dogbone Controller for NES gives you the same classic feel of your favorite retro controller and reduces thumb and hand fatigue with its comfortable ergonomic design.


Details

The Tomee Dogbone Controller for NES gives you the same classic feel of your favorite retro controller and reduces thumb and hand fatigue with its comfortable ergonomic design. It's an ideal replacement for a broken or lost controller.

Product Features

  • Compatible with all NES models
  • Comfortable ergonomic shape
  • Eight-way directional pad
  • Two face buttons
  • 6 ft. cable length
  • warning tips WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov.

    Product Warranty

    There is a 30 Day warranty on all the Hyperkin products.

    Return Policy

    All EGG- items are non-returnable.
    Need more information?
    Our staff are available to answer any questions you may have about this item


    Customer Reviews
    4.5 out of 5
    5 stars
    2
    4 stars
    3
    3 stars
    0
    2 stars
    0
    1 stars
    0
    By otterpopdotorg
    Date: March 29, 2022
    I purchased two of these on accident. I am glad I did, because each one had a problem and being able to compare them side-by-side allowed me to not overreact to it.The first controller had great feeling buttons, but had an issue with the connecting cable. Inside the main cable of the controller are a group of wires, and that housing cable (the one you typically see, the big black one) was pulled out of the controller showing the individual wires and leaving them exposed and vulnerable to damage.The second controller had really lackluster button feel, but the cord cover was correctly in place. I decided to do a little controller surgery and see what I could find. I opened the one with the cord issue first and saw the layout, and then opened the other one to see how it compared. I could see immediately how the cable was routed and how it should have been held in place inside the controller, but had slipped out of place. This took a few seconds to fix, and then I looked at the buttons on each one.Most people who crack open controllers are used to larger one-piece rubber membranes which cover the button and provide the continuity through the tiny carbon pad to make the connection go live. That is what makes the action on screen. These controllers instead have separate tiny silicone (I suppose) membranes for each button. I could see how they sat on the one with great button press, and how on the one with mushy buttons they were not sitting correctly. I popped the membrane out, turned it to the right orientation, and reassembled. Perfect.overall quality control might be a bit lax here, or I could have just received two with issues randomly. Even if I had to cannibalize two controllers to make one that was perfect, it would have been half the price of the official Nintendo dogbone controller and that would have been acceptable to me.
    Rating: 4 stars [4 of 5 Stars!]
    By Victor Guerrero
    Date: September 13, 2021
    It works pretty good for the nes and 3rd party console
    Rating: 4 stars [4 of 5 Stars!]
    By Grymcell
    Date: March 24, 2020
    I was Very excited to use this, because growing up, and even today, I had not ever heard of it! Now, after only using this NES controller once, I probably will not ever, go back to the square NES one lol!
    Rating: 5 stars [5 of 5 Stars!]
    By .
    Date: March 02, 2020
    I had an authentic dogbone controller with a fully intact shell, but a destroyed cord. Unlike the original NES controller, the Dogbone controller featured a modular cord which plugged into the PCB inside the controller, whereas the original was soldered on. I bought this hoping that I could either take the modular plug or far more likely take the entire PCB with soldered cord and transplant it into my authentic dogbone shell... NOPE.. Inside this thing is nothing like the authentic dogbone - the PCB will not fit inside an authentic shell... So I was stuck reselling this thing as is.. fortunately though it was an easy sell because there are lots of toploaders out there in need of dogbones!!
    Rating: 4 stars [4 of 5 Stars!]
    By JOHN C. FARLEY
    Date: January 12, 2020
    Works great!
    Rating: 5 stars [5 of 5 Stars!]
    Items 1 - 5 of 5 reviews
     1