PEX Dayton Audio SUB 1200 12" 120 Watt Powered Subwoofer P5477539PEX-300-629 https://cdnimages.opentip.com/full/PEX/PEX-300-629.jpg Dayton Audio SUB 1200 12" 120 Watt Powered Subwoofer Manufacturer Part Number: SUB-1200HighlightsDownward-firing flared port design for clean, powerful bassSelectable \"Auto-on\" modeHeavy duty long-throw 12\" wooferPerfect for small home theaters or listening roomsUnobtrusive textured black vinyl finishDayton Audio SUB-1200 12\" 120 Watt Powered SubwooferAdd thrilling low-frequency effects to your home cinema experience!The Dayton Audio SUB-1200 12\" powered subwoofer system is the perfect addition to any home theater system. This powered sub features a bottom-firing, flared port, bass reflex design for reduced port noise and increased bass response. It also utilizes a long-throw 12\" woofer and up to 120 watts of house-shaking power.Onboard connectivity makes this an easy-to-add and easy-to-adjust solutionThe amplifier features high and low level inputs and high level outputs, a phase switch, independent volume control, an auto on/off switch (activated by an input signal) and a variable 12 dB electronic low pass filter. This compact sub is finished in an unobtrusive black vinyl that will complement any decor.Power and punch to spare, but from a ridiculously compact enclosureSpecifications: • Power output: 120 watts RMS • Frequency response: 25-140 Hz • Box design: Ported • Inputs: RCA line level & speaker level • Outputs: Speaker level • Crossover frequency control: Continuously variable from 40 Hz to 140 Hz @ 12 dB/octave • Phase switch • Auto on/off • Power requirements: 120 VAC, 60 Hz • Dimensions (plastic feet included): 16-3/4\" H x 16-3/16\" W x 17-3/4\" D.Features:1. Line Level InputsThe line level inputs are used to connect pre-put or preamplifier outputs directly to the subwoofer amplifier\'s internal crossover. These inputs are summed to mono. This is the preferred way to connect the subwoofer amplifier. If you have a mono line level signal from a \"Pro-Logic\" or \"Dolby Digital\" receiver use the right \"red\" input. Note: If a LFE mono output is connected, set the crossover point to maximum.2. High Level InputsIf preamplifier outputs are not available, use the high-level (speaker) inputs. The speaker level inputs can be connected directly to the amplifier by inserting the speaker wire.3. High Level OutputsThere are also high level outputs which can be used to connect to main speakers or to another powered subwoofer with high level inputs. Note: High level outputs are paralleled to the high level inputs with no high pass filter.4. Crossover Frequency ControlContinuously variable from 40 Hz at 12 dB/octave. Set the frequency control to where the audio does not sound \"muddy\", normally between 60-80 Hz. Note: If a LFE mono output is connected set the crossover point to maximum.5. Gain ControlAdjusts the output level of the subwoofer. Set the level to where the bass frequencies blend with the other speakers. Note: Most people have a tendency to set the level too high, which makes the audio sound \"boomy\".6. Phase SwitchSelectable between 0° and 180°. This assists subwoofer placement. The correct position will be the one that provides the most apparent bass output.7. Power Switch (Auto On/Off)When the power is in the auto position, the amplifier will automatically turn on when a signal is present. Note: In auto/off mode, the power on LED is always on (red), even when amp is in rest mode (off). The power LED will turn green when the unit is activated. Product Specifications Woofer Diameter:12\" Dayton Audio SUB-1200 12\" 120 Watt Powered Subwoofer Brand:Dayton Audio Model:SUB-1200 Part Number:300-629 UPC:844632094118 Product Category:Powered Subwoofers Unit of Measure:EA Weight:44.65 lbs. 5477539 844632094118 57.04lbs 0.00 0.00 0.00
Dayton Audio
194.3800 2022-09-18 In Stock
Share to:

Dayton Audio SUB-1200 12" 120 Watt Powered Subwoofer

Brand Dayton Audio
See other products from PEX

Upc: 844632094118
SKU: PEX-300-629
Price:
$194.38Free shipping on orders over $129 on select PEX- items. Details
Quantity:
Shipping:
$0.00 To [ 20149 ] Estimated Delivery Date: Sep 22, 2021 to Sep 24, 2021
In Stock
Share & Earn 10% Cash Back Best Price in Bulk

Optional related products

Pricing Note

Free Shipping Promotion: Buy more items from the same series, product code beginning with PEX-, and you can get free shipping for an order of over  $129.00  consisting of only PEX- series products. NOTE: Items with a product code not beginning with PEX- in the order will still be charged a shipping fee.

Product Description

Manufacturer Part Number: SUB-1200

Highlights
  • Downward-firing flared port design for clean, powerful bass
  • Selectable "Auto-on" mode
  • Heavy duty long-throw 12" woofer
  • Perfect for small home theaters or listening rooms
  • Unobtrusive textured black vinyl finish


Dayton Audio SUB-1200 12" 120 Watt Powered Subwoofer
Add thrilling low-frequency effects to your home cinema experience!

The Dayton Audio SUB-1200 12" powered subwoofer system is the perfect addition to any home theater system. This powered sub features a bottom-firing, flared port, bass reflex design for reduced port noise and increased bass response. It also utilizes a long-throw 12" woofer and up to 120 watts of house-shaking power.

Onboard connectivity makes this an easy-to-add and easy-to-adjust solution

The amplifier features high and low level inputs and high level outputs, a phase switch, independent volume control, an auto on/off switch (activated by an input signal) and a variable 12 dB electronic low pass filter. This compact sub is finished in an unobtrusive black vinyl that will complement any decor.

Power and punch to spare, but from a ridiculously compact enclosure

Specifications: • Power output: 120 watts RMS • Frequency response: 25-140 Hz • Box design: Ported • Inputs: RCA line level & speaker level • Outputs: Speaker level • Crossover frequency control: Continuously variable from 40 Hz to 140 Hz @ 12 dB/octave • Phase switch • Auto on/off • Power requirements: 120 VAC, 60 Hz • Dimensions (plastic feet included): 16-3/4" H x 16-3/16" W x 17-3/4" D.
Features:
1. Line Level InputsThe line level inputs are used to connect pre-put or preamplifier outputs directly to the subwoofer amplifier's internal crossover. These inputs are summed to mono. This is the preferred way to connect the subwoofer amplifier. If you have a mono line level signal from a "Pro-Logic" or "Dolby Digital" receiver use the right "red" input. Note: If a LFE mono output is connected, set the crossover point to maximum.

2. High Level InputsIf preamplifier outputs are not available, use the high-level (speaker) inputs. The speaker level inputs can be connected directly to the amplifier by inserting the speaker wire.

3. High Level OutputsThere are also high level outputs which can be used to connect to main speakers or to another powered subwoofer with high level inputs. Note: High level outputs are paralleled to the high level inputs with no high pass filter.

4. Crossover Frequency ControlContinuously variable from 40 Hz at 12 dB/octave. Set the frequency control to where the audio does not sound "muddy", normally between 60-80 Hz. Note: If a LFE mono output is connected set the crossover point to maximum.

5. Gain ControlAdjusts the output level of the subwoofer. Set the level to where the bass frequencies blend with the other speakers. Note: Most people have a tendency to set the level too high, which makes the audio sound "boomy".

6. Phase SwitchSelectable between 0° and 180°. This assists subwoofer placement. The correct position will be the one that provides the most apparent bass output.

7. Power Switch (Auto On/Off)When the power is in the auto position, the amplifier will automatically turn on when a signal is present. Note: In auto/off mode, the power on LED is always on (red), even when amp is in rest mode (off). The power LED will turn green when the unit is activated.
Product Specifications
  • Woofer Diameter:12"
Dayton Audio SUB-1200 12" 120 Watt Powered Subwoofer
  • Brand:Dayton Audio
  • Model:SUB-1200
  • Part Number:300-629
  • UPC:844632094118
  • Product Category:Powered Subwoofers
  • Unit of Measure:EA
  • Weight:44.65 lbs.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov.
Need more information?
Our staff are available to answer any questions you may have about this item


Look Similar Items By Category


Customer Reviews
0 reviews
Be the first to review this item!

Your Recent History