PEX Dayton Audio DS135 8 5" Designer Series Woofer Speaker P5476205PEX-295-426 https://cdnimages.opentip.com/full/PEX/PEX-295-426.jpg Dayton Audio DS135 8 5" Designer Series Woofer Speaker Manufacturer Part Number: DS135-8HighlightsCosmetic frame with low profile lip, designed for front mounting-no countersinking required!Coated paper cone, half roll rubber surround for durability and accurate reproductionOptimized to yield a low 3 dB down point and high potential output in a reasonably sized cabinetSmooth frequency response and linear roll-off simplify filter design, guaranteeing good results with off-the-shelf crossoversVented pole piece for minimized power compression and maximized reliabilityGenerous Xmax capability encourages use of moderate bass boost to tailor the responseRetains the same \"family look\" as the popular Dayton Audio DVC Series subwoofers and passive radiatorsDayton Audio DS135-8 5\" Designer Series Woofer SpeakerThe Designer Series by Dayton Audio was developed specifically with the speaker designer in mind. It is an affordable, attractive line of drivers that puts performance first. Careful engineering ensures that each speaker in the series is capable of handling full rated power at the lowest possible frequencies—without exceeding Xmax.These speakers combine useful performance parameters with elegant style. Carefully optimized to provide superb audio reproduction when incorporated into a wide variety of enclosures and alignments, the Designer Series transducers put a beautiful face on audiophile excellence.• Suggested enclosures:Sealed cabinet: Type: Acoustic suspension (alpha 3.0), Qtc 0.60; Size (internal) including volume displaced by driver: 0.1 ft³; Internal cabinet dimensions (golden ratio): 9-1/8\"H x 5-5/8\"W x 3-1/2\"D.Typicalresults: 3 dB down-point (f3):118 Hz;Low frequency limit at rated power without exceeding conventional Xmax (i.e. (voice coil length – gap height) / 2)):50 Hz.Vented cabinet: Type: Bass reflex; Size (internal) including volume displaced by driver and port:0.17 ft³; Internal cabinet dimensions (golden ratio): 10-3/4\"H x 6-5/8\"W x 4-1/8\"D;Port dimensions (with flared exit): 1\" dia. x 4\"L.Typicalresults: 3 dB down-point (f3):66 Hz; Tuning frequency (fb):62 Hz;Low frequency limit at rated power without exceeding conventional Xmax (i.e. (voice coil length – gap height) / 2)):48 Hz.Frequency response (FRD) and Impedance (ZMA) data files available to assist in crossover and enclosure modeling. Product Specifications Nominal Diameter:5\" Power Handling (RMS):50 Watts Power Handling (max):100 Watts Impedance:8 ohms Frequency Response:50 to 7,000 Hz Sensitivity:86.6 dB 2.83V/1m Voice Coil Diameter:1\" Magnet Weight:21 oz. Thiele-Small Parameters Resonant Frequency (Fs):52.5 Hz DC Resistance (Re):5.9 ohms Voice Coil Inductance (Le):0.84 mH Mechanical Q (Qms):2.02 Electromagnetic Q (Qes):0.48 Total Q (Qts):0.39 Compliance Equivalent Volume (Vas):0.257 ft.3 Mechanical Compliance of Suspension (Cms):0.95 mm/N BL Product (BL):6.23 Tm Diaphragm Mass Inc. Airload (Mms):9.7g Maximum Linear Excursion (Xmax):4.85 mm Surface Area of Cone (Sd):75.4 cm2 Materials of Construction Cone Material:Coated Paper Surround Material:Rubber Voice Coil Wire Material:Copper Voice Coil Former:Aluminum Basket / Frame Material:Steel Magnet Material:Ferrite Mounting Information Overall Outside Diameter:5.31\" Baffle Cutout Diameter:4.39\" Depth:2.7\" Bolt Circle Diameter:4.96\" # Mounting Holes:4 Optimum Cabinet Size (determined using BassBox 6 Pro High Fidelity suggestion) Sealed Volume:0.07 ft.3 Sealed F3:113 Hz Vented Volume:0.15 ft.3 Vented F3:66 Hz Dayton Audio DS135-8 5\" Designer Series Woofer Speaker Brand:Dayton Audio Model:DS135-8 Part Number:295-426 UPC:844632095399 Product Category:Woofers Unit of Measure:EA Weight:3 lbs. 5476205 844632095399 6.60lbs 0.00 0.00 0.00
Dayton Audio
26.98 In Stock
customer review - by , October 10, 2017
5/ 5stars
Speakers were a perfect replacement for an older system I had. Sound great.
Share to:

Dayton Audio DS135-8 5" Designer Series Woofer Speaker

Rating 5 | 1 reviews
See other products from PEX

Upc: 844632095399
SKU: PEX-295-426
Price:
$26.98Free shipping on orders over $129 on select PEX- items. Details
Quantity:
Shipping:
$7.45 To [ 20149 ] Estimated Delivery Date: May 11, 2021 to May 13, 2021
In Stock
Share & Earn 10% Cash Back Best Price in Bulk
Price: $26.98 ea X 1 qty = $26.98
Quantity Price Shipping & Handling Final Price (Shipping Fee Included) Save
1+ $26.98 $7.45 $34.43/Each 0%
10+ $18.24 $0.00 $18.24/Each 47%
This item is excluded from use of other offer, discount or coupon.

Optional related products

Pricing Note

Free Shipping Promotion: Buy more items from the same series, product code beginning with PEX-, and you can get free shipping for an order of over  $129.00  consisting of only PEX- series products. NOTE: Items with a product code not beginning with PEX- in the order will still be charged a shipping fee.

Product Description

Manufacturer Part Number: DS135-8

Highlights
  • Cosmetic frame with low profile lip, designed for front mounting-no countersinking required!
  • Coated paper cone, half roll rubber surround for durability and accurate reproduction
  • Optimized to yield a low 3 dB down point and high potential output in a reasonably sized cabinet
  • Smooth frequency response and linear roll-off simplify filter design, guaranteeing good results with off-the-shelf crossovers
  • Vented pole piece for minimized power compression and maximized reliability
  • Generous Xmax capability encourages use of moderate bass boost to tailor the response
  • Retains the same "family look" as the popular Dayton Audio DVC Series subwoofers and passive radiators


Dayton Audio DS135-8 5" Designer Series Woofer Speaker
The Designer Series by Dayton Audio was developed specifically with the speaker designer in mind. It is an affordable, attractive line of drivers that puts performance first. Careful engineering ensures that each speaker in the series is capable of handling full rated power at the lowest possible frequencies—without exceeding Xmax.

These speakers combine useful performance parameters with elegant style. Carefully optimized to provide superb audio reproduction when incorporated into a wide variety of enclosures and alignments, the Designer Series transducers put a beautiful face on audiophile excellence.

• Suggested enclosures:

Sealed cabinet: Type: Acoustic suspension (alpha 3.0), Qtc 0.60; Size (internal) including volume displaced by driver: 0.1 ft³; Internal cabinet dimensions (golden ratio): 9-1/8"H x 5-5/8"W x 3-1/2"D.Typicalresults: 3 dB down-point (f3):118 Hz;Low frequency limit at rated power without exceeding conventional Xmax (i.e. (voice coil length – gap height) / 2)):50 Hz.

Vented cabinet: Type: Bass reflex; Size (internal) including volume displaced by driver and port:0.17 ft³; Internal cabinet dimensions (golden ratio): 10-3/4"H x 6-5/8"W x 4-1/8"D;Port dimensions (with flared exit): 1" dia. x 4"L.Typicalresults: 3 dB down-point (f3):66 Hz; Tuning frequency (fb):62 Hz;Low frequency limit at rated power without exceeding conventional Xmax (i.e. (voice coil length – gap height) / 2)):48 Hz.

Frequency response (FRD) and Impedance (ZMA) data files available to assist in crossover and enclosure modeling.
Product Specifications
  • Nominal Diameter:5"
  • Power Handling (RMS):50 Watts
  • Power Handling (max):100 Watts
  • Impedance:8 ohms
  • Frequency Response:50 to 7,000 Hz
  • Sensitivity:86.6 dB 2.83V/1m
  • Voice Coil Diameter:1"
  • Magnet Weight:21 oz.
Thiele-Small Parameters
  • Resonant Frequency (Fs):52.5 Hz
  • DC Resistance (Re):5.9 ohms
  • Voice Coil Inductance (Le):0.84 mH
  • Mechanical Q (Qms):2.02
  • Electromagnetic Q (Qes):0.48
  • Total Q (Qts):0.39
  • Compliance Equivalent Volume (Vas):0.257 ft.3
  • Mechanical Compliance of Suspension (Cms):0.95 mm/N
  • BL Product (BL):6.23 Tm
  • Diaphragm Mass Inc. Airload (Mms):9.7g
  • Maximum Linear Excursion (Xmax):4.85 mm
  • Surface Area of Cone (Sd):75.4 cm2
Materials of Construction
  • Cone Material:Coated Paper
  • Surround Material:Rubber
  • Voice Coil Wire Material:Copper
  • Voice Coil Former:Aluminum
  • Basket / Frame Material:Steel
  • Magnet Material:Ferrite
Mounting Information
  • Overall Outside Diameter:5.31"
  • Baffle Cutout Diameter:4.39"
  • Depth:2.7"
  • Bolt Circle Diameter:4.96"
  • # Mounting Holes:4
Optimum Cabinet Size (determined using BassBox 6 Pro High Fidelity suggestion)
  • Sealed Volume:0.07 ft.3
  • Sealed F3:113 Hz
  • Vented Volume:0.15 ft.3
  • Vented F3:66 Hz
Dayton Audio DS135-8 5" Designer Series Woofer Speaker
  • Brand:Dayton Audio
  • Model:DS135-8
  • Part Number:295-426
  • UPC:844632095399
  • Product Category:Woofers
  • Unit of Measure:EA
  • Weight:3 lbs.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov.
Need more information?
Our staff are available to answer any questions you may have about this item


Look Similar Items By Category


Customer Reviews
5 out of 5
5 stars
1
4 stars
0
3 stars
0
2 stars
0
1 stars
0
By iacevedo
Date Added: Sunday 01 October, 2017
Speakers were a perfect replacement for an older system I had. Sound great.
Rating: [5 of 5 Stars!]
Items 1 - 1 of 1 reviews
 1 

Your Recent History