5 out of 5
Dayton Audio DAEX32Q-8 Dual Steel Spring Balanced 32mm Exciter 20W 8 Ohm
* Click "Add to Cart" to calculate shipping and delivery time.
Pricing Note
Product Description
Manufacturer Part Number: DAEX32Q-8
When applied to vertical surfaces the Dayton Audio DAEX32Q-8 dual spring balanced exciter has more linear movement to deliver extremely accurate response while producing lower distortion.
Key Features:
Dayton Audio DAEX32Q-8 Dual Steel Spring Balanced 32mm Exciter 20W 8 Ohm
The DAEX32Q-8 from Dayton Audio can turn most rigid, flat surfaces into a speaker. Designed specifically for mounting to vertical surfaces, this exciter uses a dual spring spider to better support the large neodymium motor providing improved linearity. With a 2-layer 32 mm voice coil, this exciter can handle up to 40 watts peak for high output even when attached to thicker surfaces. To ensure maximum acoustic energy transfer between the transducer and the surface to which it is attached, 3M VHB (Very High Bond) adhesive is pre-applied... just peel and stick! This exciter is perfect for turning whatever you can imagine into a speaker such as cabinet doors, monitors, windows, garage doors, ect…
Note: An exciter's frequency response and sensitivity are completely dependent on the exciter's designated surface. Thinner, smaller materials will tend to be louder and create a mid/tweeter response. Thicker, larger materials (with multiple exciters) will be slightly quieter but result in a more full-range sound.
Specifications: Power handling: 20 watts RMS, 40 watts peak VCdia: 32 mm Nominal impedance: 8 ohms Re: 6.5 ohms Le: 0.36 mH Fs: 580 Hz Dimensions: 2.38" (60.5 mm) dia. x 0.78" (19.9 mm) H Adhesive dimensions: 1.26" (32 mm) outside diameter, 0.9" (23 mm) inside diameter Weight: 132.6 grams.
To learn more about Dayton Audio Exciters, and for help on which Exciter is right for you, check out .
When applied to vertical surfaces the Dayton Audio DAEX32Q-8 dual spring balanced exciter has more linear movement to deliver extremely accurate response while producing lower distortion.
Key Features:
- Dual steel spider design to better support the large neodymium motor
- 32 mm two layer voice coil for high, 20 watts RMS, power handling
- Pre-applied 3M™ VHB™ adhesive for quick, secure installation
- 8 ohm impedance for easy connection to most amplifiers
Dayton Audio DAEX32Q-8 Dual Steel Spring Balanced 32mm Exciter 20W 8 Ohm
The DAEX32Q-8 from Dayton Audio can turn most rigid, flat surfaces into a speaker. Designed specifically for mounting to vertical surfaces, this exciter uses a dual spring spider to better support the large neodymium motor providing improved linearity. With a 2-layer 32 mm voice coil, this exciter can handle up to 40 watts peak for high output even when attached to thicker surfaces. To ensure maximum acoustic energy transfer between the transducer and the surface to which it is attached, 3M VHB (Very High Bond) adhesive is pre-applied... just peel and stick! This exciter is perfect for turning whatever you can imagine into a speaker such as cabinet doors, monitors, windows, garage doors, ect…
Note: An exciter's frequency response and sensitivity are completely dependent on the exciter's designated surface. Thinner, smaller materials will tend to be louder and create a mid/tweeter response. Thicker, larger materials (with multiple exciters) will be slightly quieter but result in a more full-range sound.
Specifications: Power handling: 20 watts RMS, 40 watts peak VCdia: 32 mm Nominal impedance: 8 ohms Re: 6.5 ohms Le: 0.36 mH Fs: 580 Hz Dimensions: 2.38" (60.5 mm) dia. x 0.78" (19.9 mm) H Adhesive dimensions: 1.26" (32 mm) outside diameter, 0.9" (23 mm) inside diameter Weight: 132.6 grams.
To learn more about Dayton Audio Exciters, and for help on which Exciter is right for you, check out .
Product Details | |
|---|---|
| Brand | Dayton Audio |
| Model | DAEX32Q-8 |
| Part Number | 295-268 |
| UPC | 848791001987 |
| Unit of Measure | Each |
| Weight | 0.3 |
Product Specifications | |
|---|---|
| Application | Full-Range Exciter |
| Power Handling (RMS) | 20 Watts |
| Impedance | 8Ω |
Attention CA Residents: Prop 65 Warning
WARNING:
This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov.
Need more information?
Our staff are available to answer any questions you may have about this item
Our staff are available to answer any questions you may have about this item
Look Similar Items By Category
Customer Reviews
By Joseph P Normile
Date: January 19, 2022
Very good detail of recorded sound, fast response, very good spread of range, a little weak on the base side.
Rating: 
[5 of 5 Stars!]
[5 of 5 Stars!]
By A Customer
Date: July 28, 2021
A very capable driver, but you need to find the sweet spots on your panel (mark off a grid and measure response spectrum w/REW or similar at each grid location) to get the best output. If your panel has 2 sweet spots, consider placing 2 exciters in parallel. You will definitely need EQ to get flat response, in almost all cases, unless you're a genius at panel construction and placement. Be aware that the exciter resonance around 200 Hz means no output from your panel around that frequency, so cross-over and support with other drivers if you need frequency response across that hole
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By Mark Plag
Date: December 22, 2020
Made speakers from XP's foam and these exciters. They work well.
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
Items 1 - 3 of 3 reviews
1