0 reviews
Be the first to review this item!
Dayton Audio DAEX19QLP-4 Quad Feet Low Profile 19mm Exciter 5W 4 Ohm
Brand Dayton Audio
See other products from PEX
* Click "Add to Shopping List" to save the item for later purchase. You can receive a notice email when it is back in stock.
Pricing Note
Product Description
Manufacturer Part Number: DAEX19QLP-4
Turn almost anything with a flat surface into a speaker. The Dayton Audio DAEX19QLP-4 4 ohm sound exciter improves power handling with a vented voice coil.
Key Features:
Dayton Audio DAEX19QLP-4 Quad Feet Low Profile 19mm Exciter 5W 4 Ohm
Dayton Audio's DAEX19QLP-4 quad arm exciter is built with four arms that extend out from the main exciter body, which allows this exciter to transfer sound to a much larger surface for lower frequency response extension (more bass). Also, the arms help to support the magnet/voice coil improving linearity when mounted on vertical surfaces.
A neodymium magnet is employed to create maximum magnetic flux around the proprietary voice coil for increased sensitivity when compared to similar sized exciters. In turn, this reduces power requirements and makes it possible to use very small audio amplifiers, without sacrificing total output. The 0.75" voice coil allows for more input power, creating rich, dynamic sound.To ensure maximum acoustic energy transfer between the transducer and the surface to which it is attached, 3M VHB (Very High Bond) adhesive is pre-applied to the main body, and the four arms ... just peel and stick!
Note: An exciter's frequency response and sensitivity are completely dependent on the exciter's designated surface. Thinner, smaller materials will tend to be louder and create a mid/tweeter response. Thicker, larger materials (with multiple exciters) will be slightly quieter but result in a more full-range sound.
Specifications: Power handling: 5 watts RMS VCdia: 19 mm Nominal impedance: 4 ohms Re: 3.5 ohms Le: 0.13 mH Fs: 450 Hz Dimensions: 2.25" (57 mm) overall diameter x 0.5" (12 mm) total height Weight: 24.2 grams.
To learn more about Dayton Audio Exciters, and for help on which Exciter is right for you, check out .
Turn almost anything with a flat surface into a speaker. The Dayton Audio DAEX19QLP-4 4 ohm sound exciter improves power handling with a vented voice coil.
Key Features:
- Rare-earth neodymium motor and a proprietary vented voice coil
- 4 ohm impedance for use with small, Class D amplifiers
- Four arms provide extra support improving linearity
- Turns any flat, rigid surface into a speaker
Dayton Audio DAEX19QLP-4 Quad Feet Low Profile 19mm Exciter 5W 4 Ohm
Dayton Audio's DAEX19QLP-4 quad arm exciter is built with four arms that extend out from the main exciter body, which allows this exciter to transfer sound to a much larger surface for lower frequency response extension (more bass). Also, the arms help to support the magnet/voice coil improving linearity when mounted on vertical surfaces.
A neodymium magnet is employed to create maximum magnetic flux around the proprietary voice coil for increased sensitivity when compared to similar sized exciters. In turn, this reduces power requirements and makes it possible to use very small audio amplifiers, without sacrificing total output. The 0.75" voice coil allows for more input power, creating rich, dynamic sound.To ensure maximum acoustic energy transfer between the transducer and the surface to which it is attached, 3M VHB (Very High Bond) adhesive is pre-applied to the main body, and the four arms ... just peel and stick!
Note: An exciter's frequency response and sensitivity are completely dependent on the exciter's designated surface. Thinner, smaller materials will tend to be louder and create a mid/tweeter response. Thicker, larger materials (with multiple exciters) will be slightly quieter but result in a more full-range sound.
Specifications: Power handling: 5 watts RMS VCdia: 19 mm Nominal impedance: 4 ohms Re: 3.5 ohms Le: 0.13 mH Fs: 450 Hz Dimensions: 2.25" (57 mm) overall diameter x 0.5" (12 mm) total height Weight: 24.2 grams.
To learn more about Dayton Audio Exciters, and for help on which Exciter is right for you, check out .
Product Details | |
|---|---|
| Brand | Dayton Audio |
| Model | DAEX19QLP-4 |
| Part Number | 295-260 |
| UPC | 848791001765 |
| Unit of Measure | Each |
| Weight | 0.1 |
Product Specifications | |
|---|---|
| Application | Full-Range Exciter |
| Power Handling (RMS) | 5 Watts |
| Impedance | 4Ω |
Attention CA Residents: Prop 65 Warning
WARNING:
This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov.
Need more information?
Our staff are available to answer any questions you may have about this item
Our staff are available to answer any questions you may have about this item
Look Similar Items By Category