PEX Dayton Audio DAEX19CT 4 Coin Type 19mm Vented Exciter 5W 4 Ohm P5472603PEX-295-218 https://cdnimages.opentip.com/full/PEX/PEX-295-218.jpg Dayton Audio DAEX19CT 4 Coin Type 19mm Vented Exciter 5W 4 Ohm Manufacturer Part Number: DAEX19CT-4HighlightsSmall size; just under 1-1/2\" diameter, about 1/2\" highPre-applied 3M™ VHB™ adhesive for quick, durable installationRare-earth neodymium motor with cooling vents for higher power handling4-ohm impedance for use with small, Class D amplifiersStrategically-placed vent holes cool this exciter\'s voice coil for higher power handlingDayton Audio DAEX19CT-4 Coin Type 19mm Vented Exciter 5W 4 OhmDayton Audio\'s 19 mm DAEX19CT-4 coin type exciter features the same ability to turn nearly any surface into a speaker, as other exciters and tactile transducers, only in a more compact package for working with smaller surfaces. This exciter\'s small size enables audio reproduction in places never imagined: toys, monitors, cabinet doors... even windows!A neodymium magnet is employed to create maximum magnetic flux around the proprietary voice coil for increased sensitivity when compared to similar sized exciters. In turn, this reduces power requirements and makes it possible to use very small audio amplifiers, without sacrificing total output. Cooling holes placed strategically on this exciter\'s housing allows for higher power handling, for applications where more output is desired, while maintaining a small form factor.To ensure maximum acoustic energy transfer between the transducer and the surface to which it is attached, 3M VHB (Very High Bond) adhesive is pre-applied... just peel and stick! Two PCB solder points keep installation and wiring as compact as possible.Note: An exciter\'s frequency response and sensitivity are completely dependent on the exciter\'s designated surface. Thinner, smaller materials will tend to be louder and create a mid/tweeter response. Thicker, larger materials (with multiple exciters) will be slightly quieter but result in a more full-range sound.Specifications: Power handling: 5 watts RMS VCdia: 19 mm Nominal impedance: 4 ohms Re: 3.8 ohms Le: 0.04 mH Fs (uncoupled): 637 Hz Dimensions: 1.3\" (33 mm) dia. x 0.51\" (13 mm) H Adhesive dimensions: 0.85\" (21.5 mm) outside diameter, 0.63\" (21.75 mm) inside diameter Weight: 31.5 grams.To learn more about Dayton Audio Exciters, and for help on which Exciter is right for you, check out Dayton Audio\'s Understanding and Using Dayton Audio Exciters White Paper.Product SpecificationsImpedance: 4 ohmsPower Handling (RMS): 5 WattsDayton Audio DAEX19CT-4 Coin Type 19mm Vented Exciter 5W 4 OhmBrand: Dayton AudioModel: DAEX19CT-4Part Number: 295-218UPC: 848791000966Product Category: Exciters & Tactile TransducersUnit of Measure: EAWeight: 0.0500 lbs. 5472603 848791000966 0.06lbs 0.00 0.00 0.00
Dayton Audio
6.39 2022-06-17 Out of Stock
Share to:

Dayton Audio DAEX19CT-4 Coin Type 19mm Vented Exciter 5W 4 Ohm

See other products from PEX

Upc: 848791000966
SKU: PEX-295-218
List Price: $6.39
Price:
$6.39Free shipping on orders over $129 on select PEX- items. Details
Quantity:
Shipping:
$7.45 To [ 20149 ] Estimated Delivery Date: Jun 22, 2021 to Jun 24, 2021
Backorder. Due: 07/30/2021
Click "Add to Shopping List" to save the item for later purchase. You can receive a notice email when it is back in stock.
Share & Earn 10% Cash Back Best Price in Bulk
Price: $6.39 ea X 1 qty = $6.39
Quantity Price Shipping & Handling Final Price (Shipping Fee Included) Save
1+ $6.39 $7.45 $13.84/Each 0%
100+ $4.96 $0.00 $4.96/Each 64%
500+ $4.63 $0.00 $4.63/Each 67%
This item is excluded from use of other offer, discount or coupon.

Optional related products

Pricing Note

Free Shipping Promotion: Buy more items from the same series, product code beginning with PEX-, and you can get free shipping for an order of over  $129.00  consisting of only PEX- series products. NOTE: Items with a product code not beginning with PEX- in the order will still be charged a shipping fee.

Product Description

Manufacturer Part Number: DAEX19CT-4

Highlights
  • Small size; just under 1-1/2" diameter, about 1/2" high
  • Pre-applied 3M™ VHB™ adhesive for quick, durable installation
  • Rare-earth neodymium motor with cooling vents for higher power handling
  • 4-ohm impedance for use with small, Class D amplifiers
  • Strategically-placed vent holes cool this exciter's voice coil for higher power handling


Dayton Audio DAEX19CT-4 Coin Type 19mm Vented Exciter 5W 4 Ohm

Dayton Audio's 19 mm DAEX19CT-4 coin type exciter features the same ability to turn nearly any surface into a speaker, as other exciters and tactile transducers, only in a more compact package for working with smaller surfaces. This exciter's small size enables audio reproduction in places never imagined: toys, monitors, cabinet doors... even windows!

A neodymium magnet is employed to create maximum magnetic flux around the proprietary voice coil for increased sensitivity when compared to similar sized exciters. In turn, this reduces power requirements and makes it possible to use very small audio amplifiers, without sacrificing total output. Cooling holes placed strategically on this exciter's housing allows for higher power handling, for applications where more output is desired, while maintaining a small form factor.

To ensure maximum acoustic energy transfer between the transducer and the surface to which it is attached, 3M VHB (Very High Bond) adhesive is pre-applied... just peel and stick! Two PCB solder points keep installation and wiring as compact as possible.

Note: An exciter's frequency response and sensitivity are completely dependent on the exciter's designated surface. Thinner, smaller materials will tend to be louder and create a mid/tweeter response. Thicker, larger materials (with multiple exciters) will be slightly quieter but result in a more full-range sound.

Specifications: Power handling: 5 watts RMS VCdia: 19 mm Nominal impedance: 4 ohms Re: 3.8 ohms Le: 0.04 mH Fs (uncoupled): 637 Hz Dimensions: 1.3" (33 mm) dia. x 0.51" (13 mm) H Adhesive dimensions: 0.85" (21.5 mm) outside diameter, 0.63" (21.75 mm) inside diameter Weight: 31.5 grams.

To learn more about Dayton Audio Exciters, and for help on which Exciter is right for you, check out Dayton Audio's Understanding and Using Dayton Audio Exciters White Paper.



Product Specifications
  • Impedance: 4 ohms
  • Power Handling (RMS): 5 Watts
Dayton Audio DAEX19CT-4 Coin Type 19mm Vented Exciter 5W 4 Ohm
  • Brand: Dayton Audio
  • Model: DAEX19CT-4
  • Part Number: 295-218
  • UPC: 848791000966
  • Product Category: Exciters & Tactile Transducers
  • Unit of Measure: EA
  • Weight: 0.0500 lbs.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov.
Need more information?
Our staff are available to answer any questions you may have about this item


Look Similar Items By Category


Customer Reviews
0 reviews
Be the first to review this item!
Customers also purchased
  • $7.32
  • $27.49
  • $26.00
  • $1.53
Recommended by
  • $5.69
  • $5.81
  • $7.09
  • $7.34
  • $6.79
  • $6.59
  • $7.29
  • $13.29
  • $5.29
  • $36.98
  • $1.49
  • $171.42

Your Recent History