skip to footer block
PEX Dayton Audio DAEX 13 4SM Haptic Feedback Transducer 13mm 3W 4 Ohm P7750761PEX-295-258 https://cdnimages.opentip.com/full/PEX/PEX-295-258.jpg Dayton Audio DAEX 13 4SM Haptic Feedback Transducer 13mm 3W 4 Ohm Manufacturer Part Number: DAEX-13-4SMAdd audio to products and projects you never thought possible with the ultra-small Dayton Audio DAEX-13-4SM exciter. Measuring in at only 0.75\" wide by 1.5\" long and just 0.3\" deep this exciter can fit almost anywhere. This exciter is also perfect for creating haptic feedback systems.Key Features: Extremely small but powerful design can fit almost anywhere Perfect for creating haptic (touch) feedback systems Unique suspension allows high excursion for surprisingly powerful response Rare-earth neodymium motor and a proprietary 13 mm voice coil 4-ohm impedance for use with small, Class D amplifiers Pre-applied 3M™ VHB™ adhesive for quick, durable installation Dayton Audio DAEX-13-4SM Haptic Feedback Transducer 13mm 3W 4 OhmDayton Audio\'s DAEX-13-4SM exciter will allow you to add audio or haptic (tactile) feedback to even the smallest projects. This 13 mm exciter is an ideal option when designing pocket sized personal speakers or for adding audio to small art projects and models. At only 0.75\" wide by 1.5\" long, this exciter is even perfect for use in virtual reality haptic feedback systems such as gloves and headsets.A neodymium magnet is employed to create maximum magnetic flux around the proprietary voice coil for increased sensitivity when compared to similar sized exciters. In turn, this reduces power requirements and makes it possible to use very small audio amplifiers, without sacrificing total output. The unique suspension is capable of high physical excursion to allow this extremely small and lightweight exciter to deliver an impressive amount of force while remaining linear.To ensure maximum acoustic energy transfer between the transducer and the surface to which it is attached, 3M VHB (Very High Bond) adhesive is pre-applied... just peel and stick! Two PCB solder points keep installation and wiring as compact as possible.Note: An exciter\'s frequency response and sensitivity are completely dependent on the exciter\'s designated surface. Thinner, smaller materials will tend to be louder and create a mid/tweeter response. Thicker, larger materials (with multiple exciters) will be slightly quieter but result in a more full-range sound.Specifications: Power handling: 3 watts RMS VCdia: 13 mm Nominal impedance: 4 ohms Re: 3.7 ohms Le: 0.022 mH Fs: 950 Hz Dimensions: 0.74\" (18.5 mm) W x 1.51\" (38.5 mm) L x 0.31\" (8 mm) H Adhesive dimensions: 0.65\" (16.5 mm) outside diameter Weight: 6.7 grams.To learn more about Dayton Audio Exciters, and for help on which Exciter is right for you, check out .Product Details BrandDayton Audio ModelDAEX-13-4SM Part Number295-258 UPC848791002120 Unit of MeasureEach Weight0.05 Product Specifications ApplicationHaptic Feedback Power Handling (RMS)3 Watts Impedance4Ω 7750761 848791002120 0.0600lbs 0.00 0.00 0.00
Dayton Audio
4.49 2025-03-29 1144 In Stock

Dayton Audio DAEX-13-4SM Haptic Feedback Transducer 13mm 3W 4 Ohm

Brand Dayton Audio
See other products from PEX

UPC: 848791002120
SKU: PEX-295-258
Price:
$4.49Free shipping on orders over $129 on select PEX- items. Details
Buy in bulk & save 22% ($3.50 each)
Quantity:
1144 In Stock
*  Click "Add to Cart" to calculate shipping and delivery time.
Share & Earn 10% Cash Back Best Price in Bulk
Price: $4.49 ea X 1 qty = $4.49
Quantity Price Save
1+ $4.49 0%
4+ $3.50 22%
This item is excluded from use of other offer, discount or coupon.

Pricing Note

Free Shipping Promotion: Buy more items from the same series, product code beginning with PEX-, and you can get free shipping for an order of over  $129.00  consisting of only PEX- series products.

Product Description

Manufacturer Part Number: DAEX-13-4SM

Add audio to products and projects you never thought possible with the ultra-small Dayton Audio DAEX-13-4SM exciter. Measuring in at only 0.75" wide by 1.5" long and just 0.3" deep this exciter can fit almost anywhere. This exciter is also perfect for creating haptic feedback systems.

Key Features:
  • Extremely small but powerful design can fit almost anywhere
  • Perfect for creating haptic (touch) feedback systems
  • Unique suspension allows high excursion for surprisingly powerful response
  • Rare-earth neodymium motor and a proprietary 13 mm voice coil
  • 4-ohm impedance for use with small, Class D amplifiers
  • Pre-applied 3M™ VHB™ adhesive for quick, durable installation


Dayton Audio DAEX-13-4SM Haptic Feedback Transducer 13mm 3W 4 Ohm

Dayton Audio's DAEX-13-4SM exciter will allow you to add audio or haptic (tactile) feedback to even the smallest projects. This 13 mm exciter is an ideal option when designing pocket sized personal speakers or for adding audio to small art projects and models. At only 0.75" wide by 1.5" long, this exciter is even perfect for use in virtual reality haptic feedback systems such as gloves and headsets.

A neodymium magnet is employed to create maximum magnetic flux around the proprietary voice coil for increased sensitivity when compared to similar sized exciters. In turn, this reduces power requirements and makes it possible to use very small audio amplifiers, without sacrificing total output. The unique suspension is capable of high physical excursion to allow this extremely small and lightweight exciter to deliver an impressive amount of force while remaining linear.

To ensure maximum acoustic energy transfer between the transducer and the surface to which it is attached, 3M VHB (Very High Bond) adhesive is pre-applied... just peel and stick! Two PCB solder points keep installation and wiring as compact as possible.

Note: An exciter's frequency response and sensitivity are completely dependent on the exciter's designated surface. Thinner, smaller materials will tend to be louder and create a mid/tweeter response. Thicker, larger materials (with multiple exciters) will be slightly quieter but result in a more full-range sound.

Specifications: Power handling: 3 watts RMS VCdia: 13 mm Nominal impedance: 4 ohms Re: 3.7 ohms Le: 0.022 mH Fs: 950 Hz Dimensions: 0.74" (18.5 mm) W x 1.51" (38.5 mm) L x 0.31" (8 mm) H Adhesive dimensions: 0.65" (16.5 mm) outside diameter Weight: 6.7 grams.

To learn more about Dayton Audio Exciters, and for help on which Exciter is right for you, check out .

warning tips WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov.
Need more information?
Our staff are available to answer any questions you may have about this item


Look Similar Items By Category


Customer Reviews
0 reviews
Be the first to review this item!