skip to footer block
CED Caig S CG100P DeoxIT® Gold Caig Pen applicator P1621798CED-S-CG100P https://cdnimages.opentip.com/full/CED/CED-S-CG100P.jpg Caig S CG100P DeoxIT® Gold Caig Pen applicator Manufacturer Part Number: S-CG100PApplicator: Pen, provides NO flushing action, applies 100% DeoxIT® Gold.Formulation: 100% DeoxIT® Gold.Use: When contact and connector are easily accessible. No flushing action.First Time Use: Depress tip on a surface for a minute or two until liquid flows. Pull out tip and reverse to speed up activating.Notes: Use when over spray is an issue on materials. Formulation safe on plastics. Recommend wiping off excess, leaving a thin layer. After application, if you notice a green or black discoloration (sometimes over time), this indicates it is doing its job (dissolving oxidation) and improving the connection. Wipe off and re-apply DeoxIT®.Maximize New System Performance and Critical Applications - Ideal for Gold Connections!DeoxIT® Gold G-Series, is a unique conditioning solution that improves conductivity and provides long-lasting protection on gold, base metals and other precious metal contacts and connections (gold, silver, rhodium, copper, bronze, nickel, etc.). It is the only product that actually penetrates plated surfaces, molecularly bonding to the base metals to seal and protect both surfaces.Recommended for critical applications where only slight cleaning action is necessary. If the surface looks dirty/oxidized, preclean with DeoxIT D-Series contact cleaner. DeoxIT® Gold is designed to dissolve small amounts of oxidation.For reference, DeoxIT® Gold has approximately 0.5% cleaning action.KEY FEATURES:Improves ConductivityMaintains Optimum Signal QualityPrevents Fretting/Dendrite CorrosionReduces Intermittent ConnectionsStabilizes Connections Between Similar & Dissimilar MetalsReduces Arcing, RFI and Wear & AbrasionTemperature Range, -34 C (-29 F) to +240 C (464 F)Measurements and Specs % Volatility by Weight0% Deoxidizing Ability (% of Formulation)0.50% Dielectric Constant (Er)2.314 Dielectric Strength333 V/mil Electrical Conductivity5.98 X 10-11 S/m Evaporation Rate~0 Flash Point193°C Insulation Resistance8.40 X 1010 Ω Pour Point< -45°C Solubility In Water< 0.1% @ 25°C Specific Gravity0.845 Temperature Rating-34°C to 240°C Total Acid Number1.71 mg KOH/g Vapor Pressure< 0.01 mmHg @ 20°C Viscosity38.6 cSt Packaging Dimensions7.8 in. × 4 in. × 0.8 in. Weight (Packaging)0.102 lbs. Files Safety Data SheetAll Models 1621798 697429004209 0.1000lbs 0.00 0.00 0.00
Caig
28.7400 2025-03-28 In Stock

Caig S-CG100P DeoxIT® Gold - Caig, Pen applicator

Brand Caig
See other products from CED

UPC: 697429004209
SKU: CED-S-CG100P
Price: $28.74
Quantity:
In Stock
*  Click "Add to Cart" to calculate shipping and delivery time.
Share & Earn 10% Cash Back Best Price in Bulk

Product Description

Manufacturer Part Number: S-CG100P

Applicator: Pen, provides NO flushing action, applies 100% DeoxIT® Gold.
Formulation: 100% DeoxIT® Gold.
Use: When contact and connector are easily accessible. No flushing action.
First Time Use: Depress tip on a surface for a minute or two until liquid flows. Pull out tip and reverse to speed up activating.
Notes: Use when over spray is an issue on materials. Formulation safe on plastics. Recommend wiping off excess, leaving a thin layer. After application, if you notice a green or black discoloration (sometimes over time), this indicates it is doing its job (dissolving oxidation) and improving the connection. Wipe off and re-apply DeoxIT®.

Maximize New System Performance and Critical Applications - Ideal for Gold Connections!

DeoxIT® Gold G-Series, is a unique conditioning solution that improves conductivity and provides long-lasting protection on gold, base metals and other precious metal contacts and connections (gold, silver, rhodium, copper, bronze, nickel, etc.). It is the only product that actually penetrates plated surfaces, molecularly bonding to the base metals to seal and protect both surfaces.
Recommended for critical applications where only slight cleaning action is necessary. If the surface looks dirty/oxidized, preclean with DeoxIT D-Series contact cleaner. DeoxIT® Gold is designed to dissolve small amounts of oxidation.
For reference, DeoxIT® Gold has approximately 0.5% cleaning action.

KEY FEATURES:

  • Improves Conductivity
  • Maintains Optimum Signal Quality
  • Prevents Fretting/Dendrite Corrosion
  • Reduces Intermittent Connections
  • Stabilizes Connections Between Similar & Dissimilar Metals
  • Reduces Arcing, RFI and Wear & Abrasion
  • Temperature Range, -34 C (-29 F) to +240 C (464 F)


Measurements and Specs




Files

warning tips WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov.
Need more information?
Our staff are available to answer any questions you may have about this item


Customer Reviews
0 reviews
Be the first to review this item!