skip to footer block
PEX Audtek 12 AWG OFC Speaker Wire 50 ft. P1262231PEX-100-024 https://cdnimages.opentip.com/full/PEX/PEX-100-024.jpg Audtek 12 AWG OFC Speaker Wire 50 ft. Manufacturer Part Number: SKRL-12-50Audtek Electronics\' SKRL speaker wire is designed to complement any high-end audio system. Features a clear, flexible PVC insulation and OFC configured in a rope-lay configuration to minimize skin effect. 12 AWG, 50 ft spool.Key Features: 7/41 x 36 AWG wire construction OFC strands guarantee maximum power transfer and high damping factor High-density rope lay copper stranding for superior flexibility and electrical efficiency Durable, pliable clear PVC insulation withstands abuse Extremely low capacitance and inductance Red line on one conductor and ridge on the other for easy polarity identification even in low light Audtek 12 AWG OFC Speaker Wire 50 ft.Audtek Electronics\' SKRL speaker wire is designed to complement any high-end audio system. Oxygen free copper (OFC) is configured in a rope-lay configuration to minimize skin effect which causes high frequency roll-off. Clear, flexible PVC insulation withstands abuse and is rated up to 140°F (60°C). The primary identifying polarity feature for the Audtek Electronics OFC Speaker Cable is a red line on one conductor and a ridge on the outer edge of one conductor. Feeling for the ridge allows you to easily identify the polarity even in low light conditions. Construction: 7/41 strands x 36 AWG per conductor. Also available in 100 and 500 ft. rolls and 10, 14, and 16 AWG.Audtek uses pure copper strands in its OFC speaker wire. You\'ll see OFC (Oxygen Free Copper) in many places which means the copper strands go through an additional process making it more than 99% pure copper and the result reduces resistance which increases conductivity. Increasing conductivity delivers more wattage/current to speakers or other components.Available at a lower cost is CCA (Copper Clad Aluminum) speaker wire, which is aluminum strands covered by a thin layer of copper. Pure copper\'s conductivity is 35% to 40% better than CCA due to the resistance that aluminum strands add to the signal transfer. That means you would have to buy a larger gauge of CCA wire to get the same result as OFC wire. CCA wire is also very hard to get good solder results when making your own cables. Even in premade cables, the wires are more likely to separate from the connectors and cause intermittent failures. This is why we strongly recommend Audtek OFC wire and cable for all you hookup needs.Product Details BrandAudtek Electronics ModelSKRL-12-50 Part Number100-024 UPC844632055355 Unit of MeasureRolls Weight3.6 Product Specifications Conductors2 Conductor Jacket ColorClear Wire Gauge12 1262231 844632055355 3.60lbs 0.00 0.00 0.00
Audtek Electronics
35.69 2023-10-05 122 In Stock
customer review - by , August 8, 2022
5/ 5stars
There are a number of snake-oil claims regarding high quality cables for basic audio applications. These speaker cables do a great job and the coating is easy enough to work with via nail clippers and a razer blade. I am so glad I did not waste more money on premium cables. I recommend these are any reputable entry level cables or an appropriate gauge for the planned application.
customer review - by , August 8, 2022
5/ 5stars
Out door speaks sounds great
customer review - by , August 8, 2022
5/ 5stars
Works as advertised.
customer review - by , August 8, 2022
5/ 5stars
Love the deal yet the sound quality on this material isn't worth the time returning it.
customer review - by , August 8, 2022
5/ 5stars
Works as expected
customer review - by , August 8, 2022
5/ 5stars
Used the wire for speakers in an outdoor pavilion. The wire worked well and the sound is good. Time will tell if it holds up.
customer review - by , August 8, 2022
5/ 5stars
I cut it in half and used it for two long speaker runs to the outdoor music speakers on the back and underside of my Truck Camper. I attached it to a 50watt bluetooth amp run 4 marine speakers with music on my phone.. It appears to be good wire, easy to WU splice and tape it and also use twist on caps.
customer review - by , August 8, 2022
5/ 5stars
Was what I was expecting. Wire works as it should. No issues with sound or connection.
customer review - by , August 8, 2022
5/ 5stars
This is the minimum gauge that I would use for home system speaker wire, and probably to a maximum of 20 feet length per speaker if driving some heavy wattage. For lower wattage these could be good for up to 35'. For in-wall wiring for intercom or recessed speaker sound systems, you could probably run 50' in my opinion, since these are generally lower wattage (and volume) uses. Speaker wire gauge should be based on use, wattage, and distance/length, with gauge increasing with the demands of any of the three.
customer review - by , August 8, 2022
5/ 5stars
Great pliability and functions well! Nice looking cabling!
Share to:

Audtek 12 AWG OFC Speaker Wire 50 ft.

stars Rating 5 | 238 reviews
See other products from PEX

Upc: 844632055355
SKU: PEX-100-024
Price:
$35.69Free shipping on orders over $129 on select PEX- items. Details
Buy in bulk & save 9% ($32.38 each)
Quantity:
122 In Stock
*  Click "Add to Cart" to calculate shipping and delivery time.
Share & Earn 10% Cash Back Best Price in Bulk
Price: $35.69 ea X 1 qty = $35.69
Quantity Price Save
1+ $35.69 0%
4+ $32.38 9%
This item is excluded from use of other offer, discount or coupon.

Optional related products

Pricing Note

Free Shipping Promotion: Buy more items from the same series, product code beginning with PEX-, and you can get free shipping for an order of over  $129.00  consisting of only PEX- series products. NOTE: Items with a product code not beginning with PEX- in the order will still be charged a shipping fee.

Product Description

Manufacturer Part Number: SKRL-12-50

Audtek Electronics' SKRL speaker wire is designed to complement any high-end audio system. Features a clear, flexible PVC insulation and OFC configured in a rope-lay configuration to minimize skin effect. 12 AWG, 50 ft spool.

Key Features:
  • 7/41 x 36 AWG wire construction
  • OFC strands guarantee maximum power transfer and high damping factor
  • High-density rope lay copper stranding for superior flexibility and electrical efficiency
  • Durable, pliable clear PVC insulation withstands abuse
  • Extremely low capacitance and inductance
  • Red line on one conductor and ridge on the other for easy polarity identification even in low light


Audtek 12 AWG OFC Speaker Wire 50 ft.

Audtek Electronics' SKRL speaker wire is designed to complement any high-end audio system. Oxygen free copper (OFC) is configured in a rope-lay configuration to minimize skin effect which causes high frequency roll-off. Clear, flexible PVC insulation withstands abuse and is rated up to 140°F (60°C). The primary identifying polarity feature for the Audtek Electronics OFC Speaker Cable is a red line on one conductor and a ridge on the outer edge of one conductor. Feeling for the ridge allows you to easily identify the polarity even in low light conditions. Construction: 7/41 strands x 36 AWG per conductor. Also available in 100 and 500 ft. rolls and 10, 14, and 16 AWG.

Audtek uses pure copper strands in its OFC speaker wire. You'll see OFC (Oxygen Free Copper) in many places which means the copper strands go through an additional process making it more than 99% pure copper and the result reduces resistance which increases conductivity. Increasing conductivity delivers more wattage/current to speakers or other components.

Available at a lower cost is CCA (Copper Clad Aluminum) speaker wire, which is aluminum strands covered by a thin layer of copper. Pure copper's conductivity is 35% to 40% better than CCA due to the resistance that aluminum strands add to the signal transfer. That means you would have to buy a larger gauge of CCA wire to get the same result as OFC wire. CCA wire is also very hard to get good solder results when making your own cables. Even in premade cables, the wires are more likely to separate from the connectors and cause intermittent failures. This is why we strongly recommend Audtek OFC wire and cable for all you hookup needs.

warning tips WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov.

You may also like
Need more information?
Our staff are available to answer any questions you may have about this item


Look Similar Items By Category


Customer Reviews
5 stars
219
4 stars
19
3 stars
0
2 stars
0
1 stars
0
By Kenneth Danton
Date: August 29, 2022
There are a number of snake-oil claims regarding high quality cables for basic audio applications. These speaker cables do a great job and the coating is easy enough to work with via nail clippers and a razer blade. I am so glad I did not waste more money on premium cables. I recommend these are any reputable entry level cables or an appropriate gauge for the planned application.
Rating: 5 stars [5 of 5 Stars!]
By mark danese
Date: August 25, 2022
Out door speaks sounds great
Rating: 5 stars [5 of 5 Stars!]
By Robert Wimpee
Date: August 24, 2022
Works as advertised.
Rating: 5 stars [5 of 5 Stars!]
By Andrew M. Keeler
Date: August 23, 2022
Love the deal yet the sound quality on this material isn't worth the time returning it.
Rating: 5 stars [5 of 5 Stars!]
By William Caldwell
Date: August 21, 2022
Works as expected
Rating: 5 stars [5 of 5 Stars!]
By Avid DIYer
Date: August 21, 2022
Used the wire for speakers in an outdoor pavilion. The wire worked well and the sound is good. Time will tell if it holds up.
Rating: 5 stars [5 of 5 Stars!]
Items 1 - 6 of 238 reviews
 1  2  3  4  5 ...  [Next]