skip to footer block
CED Alpha R VPP 250KA SS Potentiometer Alpha 250kΩ Audio Solid Shaft DPDT 7mm P5335615CED-R-VPP-250KA-SS https://cdnimages.opentip.com/full/CED/CED-R-VPP-250KA-SS.jpg Alpha R VPP 250KA SS Potentiometer Alpha 250kΩ Audio Solid Shaft DPDT 7mm Manufacturer Part Number: R-VPP-250KA-SSPotentiometer - Alpha, 250K Audio, DPDT Push Pull Switch, Solid Shaft, 7mm BushingMeasurements and Specs Body Depth26.5 mm Body Width18 mm Bushing Length6.5 mm Bushing ThreadM7X0.75 Hex Nut Thickness2 mm Hex Nut Width10 mm Insulation Resistance>100 MΩ at 500VDC Life15,000 cycles Max. Working Voltage150V Max Rotational Stopper Strength6Kgf Operating (Useable) Temperature-10 °C to +70 °C Rated Wattage (Power)0.1W Resistance250 kΩ Rotational Torque10-100 gf-cm Shaft Diameter6 mm Sliding Noise<47 mV TaperAudio Tolerance± 20% Total Rotational Angle300° ±5° Total Shaft Length15 mm Washer I.D.7.1 mm Washer O.D.12 mm Washer Thickness0.4 mm Withstand Voltage500 VAC for 1 min. Packaging Dimensions0.712 in. × 0.939 in. × 1.603 in. Weight (Packaging)0.03 lbs. Files Specification SheetAll Models 5335615 609722159463 0.03lbs 0.00 0.00 0.00
Alpha
3.2400 2023-06-26 In Stock
customer review - by , April 4, 2022
4/ 5stars
I hadn't noticed in the illustration that there was a locator pin to prevent the body of the pot from rotating. I didn't need that for my application, so I snipped it off and used a star washer to prevent rotation.
customer review - by , September 9, 2021
5/ 5stars
Worked fine for an archtop pickguard application. Easily soldered to the pot back where necessary.
customer review - by , August 8, 2021
5/ 5stars
I put these in a Squier CV 60's P Bass to replace a scratchy pot that came in the bass, and they work great. Well made and smooth.
customer review - by , August 8, 2021
5/ 5stars
Ordered these to do a full electronics replacement in a guitar I'm working on, the pots I received are 500k, but long shaft and much larger than as advertised. Not worth returning for the price of the parts, but I'd recommend sourcing from a different seller.
customer review - by , November 11, 2020
5/ 5stars
I bought these when I upgraded my pick-ups in my Jackson bass. The threads are barely too short and I can't get the nut on them to tighten them down, even without the washer.These are advertised as 10mm threads but really on give about 7-8mm. The originals have 10mm of actual threads. These are otherwise exact same size and shape.
customer review - by , September 9, 2020
5/ 5stars
Quality in a small size. Fits perfectly in tight spaces without compromising performance b
customer review - by , August 8, 2020
5/ 5stars
exactly as described, came in a little resealable bag which is nice. would definitely order again
customer review - by , August 8, 2020
4/ 5stars
If you're looking for a budget pot with easy install, this is it.The miniature size led to more intricate soldering than hoped for, but if you read the product description, shouldn't be a surprise.
Share to:

Alpha R-VPP-250KA-SS Potentiometer - Alpha, 250kΩ Audio, Solid Shaft, DPDT, 7mm

stars Rating 5 | 8 reviews
Brand Alpha
See other products from CED

Upc: 609722159463
SKU: CED-R-VPP-250KA-SS
Price: $3.24
Quantity:
In Stock
Click "Add to Cart" to calculate shipping and delivery time.
Share & Earn 10% Cash Back Best Price in Bulk

Optional related products

Product Description

Manufacturer Part Number: R-VPP-250KA-SS

Potentiometer - Alpha, 250K Audio, DPDT Push Pull Switch, Solid Shaft, 7mm Bushing

Measurements and Specs




Files

warning tips WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov.
Need more information?
Our staff are available to answer any questions you may have about this item


Customer Reviews
5 out of 5
5 stars
6
4 stars
2
3 stars
0
2 stars
0
1 stars
0
By Clifton S.
Date: April 30, 2022
I hadn't noticed in the illustration that there was a locator pin to prevent the body of the pot from rotating. I didn't need that for my application, so I snipped it off and used a star washer to prevent rotation.
Rating: 4 stars [4 of 5 Stars!]
By mmccullo
Date: September 13, 2021
Worked fine for an archtop pickguard application. Easily soldered to the pot back where necessary.
Rating: 5 stars [5 of 5 Stars!]
By Randy Taylor
Date: August 09, 2021
I put these in a Squier CV 60's P Bass to replace a scratchy pot that came in the bass, and they work great. Well made and smooth.
Rating: 5 stars [5 of 5 Stars!]
By Ryan Carlson
Date: August 02, 2021
Ordered these to do a full electronics replacement in a guitar I'm working on, the pots I received are 500k, but long shaft and much larger than as advertised. Not worth returning for the price of the parts, but I'd recommend sourcing from a different seller.
Rating: 5 stars [5 of 5 Stars!]
By Drummist
Date: November 29, 2020
I bought these when I upgraded my pick-ups in my Jackson bass. The threads are barely too short and I can't get the nut on them to tighten them down, even without the washer.These are advertised as 10mm threads but really on give about 7-8mm. The originals have 10mm of actual threads. These are otherwise exact same size and shape.
Rating: 5 stars [5 of 5 Stars!]
By Victor G. Gayle
Date: September 01, 2020
Quality in a small size. Fits perfectly in tight spaces without compromising performance b
Rating: 5 stars [5 of 5 Stars!]
Items 1 - 6 of 8 reviews
 1  2  [Next]