5 out of 5
Product Description
Manufacturer Part Number: R-VAMA-SS-PCL
Alpha Mini Pots with solid shaft and long PC mount terminals.
Measurements and Specs
Files
Alpha Mini Pots with solid shaft and long PC mount terminals.
- Threading: M7 x 0.75
- Distance between terminals: 5 mm (0.197")
- Lead Depth from Panel: 10.7 mm + 5 mm (0.421" + 0.197")
- Lead Distance from shaft center: 16 mm (0.630")
- Lead Thickness: 0.5 mm (0.020")
Measurements and Specs
| Body Depth | 9.1 mm | ||
| Body Width | 16.5 mm | ||
| Bushing Length | 6.5 mm | ||
| Bushing Thread | M7X0.75 | ||
| Hex Nut Thickness | 1.8 mm | ||
| Hex Nut Width | 10 mm | ||
| Insulation Resistance | >100 MΩ at 500VDC | ||
| Life | 15,000 cycles | ||
| Max. Working Voltage | 150V | ||
| Max Rotational Stopper Strength | 6Kgf | ||
| Operating (Useable) Temperature | -10 °C to +70 °C | ||
| Rated Wattage (Power) | 0.06W | ||
| Rotational Torque | 20-200 gf-cm | ||
| Shaft Diameter | 6.35 mm | ||
| Sliding Noise | <47 mV | ||
| Taper | Audio | ||
| Tolerance | 1 MΩ version | R-VAM1MA-SS-PCL | ± 30% |
| 10 kΩ version | R-VAM10KA-SS-PCL | ± 20% | |
| 25 kΩ version | R-VAM25KA-SS-PCL | ± 20% | |
| 50 kΩ version | R-VAM50KA-SS-PCL | ± 20% | |
| 100 kΩ version | R-VAM100KA-SS-PCL | ± 20% | |
| 500 kΩ version | R-VAM500KA-SS-PCL | ± 20% | |
| Total Rotational Angle | 300° ±5° | ||
| Total Shaft Length | 15 mm | ||
| Washer I.D. | 7.1 mm | ||
| Washer O.D. | 12 mm | ||
| Washer Thickness | 0.4 mm | ||
| Withstand Voltage | 500 VAC for 1 min. |
| Packaging Dimensions | 0.98 in. × 0.95 in. × 0.673 in. | |
| Weight (Packaging) | 0.013 lbs. |
Files
| Specification Sheet for 1 MΩ | R-VAM1MA-SS-PCL |
| Specification Sheet for 10 kΩ | R-VAM10KA-SS-PCL |
| Specification Sheet for 100 kΩ | R-VAM100KA-SS-PCL |
| Specification Sheet for 25 kΩ | R-VAM25KA-SS-PCL |
| Specification Sheet for 50 kΩ | R-VAM50KA-SS-PCL |
| Specification Sheet for 500 kΩ | R-VAM500KA-SS-PCL |
Attention CA Residents: Prop 65 Warning
WARNING:
This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov.
Need more information?
Our staff are available to answer any questions you may have about this item
Our staff are available to answer any questions you may have about this item
Customer Reviews
By Clifton S.
Date: April 30, 2022
I hadn't noticed in the illustration that there was a locator pin to prevent the body of the pot from rotating. I didn't need that for my application, so I snipped it off and used a star washer to prevent rotation.
Rating: 
[4 of 5 Stars!]
[4 of 5 Stars!]
By mmccullo
Date: September 13, 2021
Worked fine for an archtop pickguard application. Easily soldered to the pot back where necessary.
Rating: 
[5 of 5 Stars!]
[5 of 5 Stars!]
By Randy Taylor
Date: August 09, 2021
I put these in a Squier CV 60's P Bass to replace a scratchy pot that came in the bass, and they work great. Well made and smooth.
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By Ryan Carlson
Date: August 02, 2021
Ordered these to do a full electronics replacement in a guitar I'm working on, the pots I received are 500k, but long shaft and much larger than as advertised. Not worth returning for the price of the parts, but I'd recommend sourcing from a different seller.
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By Drummist
Date: November 29, 2020
I bought these when I upgraded my pick-ups in my Jackson bass. The threads are barely too short and I can't get the nut on them to tighten them down, even without the washer.These are advertised as 10mm threads but really on give about 7-8mm. The originals have 10mm of actual threads. These are otherwise exact same size and shape.
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By Victor G. Gayle
Date: September 01, 2020
Quality in a small size. Fits perfectly in tight spaces without compromising performance b
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]