skip to footer block
DTA Aidata BASIC METAL ARM COPY HOLDER P4703429DTA-CH012A https://cdnimages.opentip.com/full/DTA/DTA-CH012A.jpg Aidata BASIC METAL ARM COPY HOLDER Adjustable clip for different paper sizesFlexible metal arm with desk clamp attaches to the desk up to 4.4cm (1.75\") thicknessRemovable and see-through line guide 4703429 1.75lbs 0.00 0.00 0.00
Aidata
30.5600 2023-12-07 In Stock
customer review - by , April 4, 2021
5/ 5stars
This thing works great, read instructions first it's a bit tricky to turn on for the first time.
customer review - by , February 2, 2021
4/ 5stars
I very much like most of the design of this copy holder. It is listed as having a metal arm, which is only partially true. The arm rods themselves are metal, but all of the joints are plastic. They do have metal screws, which are well designed. Overall the arm is pretty sturdy. My biggest problem of the arm is that it does not bend 180 degrees. The bottom portion of the arm will only move 45 degrees. This would be fine, except for the next flaw.The copy holder itself is mounted on a fitting that does not allow it to rotate 360 degrees. It is therefore not able to be rotated all the way around to accommodate a full range of placement. The limited motion of the arm, combined with the limited rotation of the copy holder means that it is a right side only stand and even then, it doesn't put the copy holder in the right position due to my desk/hutch configuration.Finally, all of the flaws are not terminal. I will look for other mounting positions on my desk to see if I can find the position I want it. Also, I believe that it can be disassembled and reconfigured to make it left handed. I may try this if I get ambitious. I am torn between a three star and four star rating. I would recommend it with the caveat that you may need to work around the limitations or be handy enough to reconfigure it to your taste.
customer review - by , January 1, 2021
4/ 5stars
As assembled it is always at a slant, only holds about 3 sheets of paper the tray is so narrow. Not the best but it will do. More lightly constructed than the one it replaced.
customer review - by , January 1, 2021
4/ 5stars
This is the first copy holder I've ever used that didn't require me to have space cleared on my desk to stand it, or to attach sticky adhesive to my monitor. It does what it's supposed to, and the fact that it clamps on the desk, not onto the monitor is just a wonderful thing. It's also nicely sturdy, as I haven't had trouble with parts coming off or it slowly sinking down to a position other than where I set it.
customer review - by , October 10, 2020
4/ 5stars
My partner and I could not figure out how to put this item together and no instructions were included. Even after a Google search, we failed. The seller had an excellent return policy and promptly refunded me that's why 4 stars. Wish it would have worked out!
customer review - by , June 6, 2020
5/ 5stars
I knocked it down a bit on sturdiness because if you have ever worked in an office with one of these, this is NOT one of those bulletproof office versions. As long as you understand that you will have to be gentle with it I believe it will work fine... only time will tell... but so far so good!
customer review - by , January 1, 2020
5/ 5stars
Easy to use and very helpful, hand-freeing device.
Share to:

Aidata BASIC METAL-ARM COPY HOLDER

stars Rating 4.5 | 7 reviews
Brand Aidata
See other products from DTA

SKU: DTA-CH012A
Price: $30.56
Promo: $27.50 Save 10% when you spend $99+ on select products Mix More
Quantity:
In Stock
*  Click "Add to Cart" to calculate shipping and delivery time.
Share & Earn 10% Cash Back Best Price in Bulk

Optional related products

Product Description

  • Adjustable clip for different paper sizes
  • Flexible metal arm with desk clamp attaches to the desk up to 4.4cm (1.75") thickness
  • Removable and see-through line guide

  • NOTE: The images are just for your reference. Price is only for Model #: CH012A.

    warning tips WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov.
    Need more information?
    Our staff are available to answer any questions you may have about this item


    Look Similar Items By Category


    Customer Reviews
    4.5 out of 5
    5 stars
    3
    4 stars
    4
    3 stars
    0
    2 stars
    0
    1 stars
    0
    By Keith B
    Date: April 09, 2021
    This thing works great, read instructions first it's a bit tricky to turn on for the first time.
    Rating: 5 stars [5 of 5 Stars!]
    By A. Williams
    Date: February 03, 2021
    I very much like most of the design of this copy holder. It is listed as having a metal arm, which is only partially true. The arm rods themselves are metal, but all of the joints are plastic. They do have metal screws, which are well designed. Overall the arm is pretty sturdy. My biggest problem of the arm is that it does not bend 180 degrees. The bottom portion of the arm will only move 45 degrees. This would be fine, except for the next flaw.The copy holder itself is mounted on a fitting that does not allow it to rotate 360 degrees. It is therefore not able to be rotated all the way around to accommodate a full range of placement. The limited motion of the arm, combined with the limited rotation of the copy holder means that it is a right side only stand and even then, it doesn't put the copy holder in the right position due to my desk/hutch configuration.Finally, all of the flaws are not terminal. I will look for other mounting positions on my desk to see if I can find the position I want it. Also, I believe that it can be disassembled and reconfigured to make it left handed. I may try this if I get ambitious. I am torn between a three star and four star rating. I would recommend it with the caveat that you may need to work around the limitations or be handy enough to reconfigure it to your taste.
    Rating: 4 stars [4 of 5 Stars!]
    By booklover
    Date: January 15, 2021
    As assembled it is always at a slant, only holds about 3 sheets of paper the tray is so narrow. Not the best but it will do. More lightly constructed than the one it replaced.
    Rating: 4 stars [4 of 5 Stars!]
    By Kesedrith
    Date: January 05, 2021
    This is the first copy holder I've ever used that didn't require me to have space cleared on my desk to stand it, or to attach sticky adhesive to my monitor. It does what it's supposed to, and the fact that it clamps on the desk, not onto the monitor is just a wonderful thing. It's also nicely sturdy, as I haven't had trouble with parts coming off or it slowly sinking down to a position other than where I set it.
    Rating: 4 stars [4 of 5 Stars!]
    By Michelle St Claire
    Date: October 29, 2020
    My partner and I could not figure out how to put this item together and no instructions were included. Even after a Google search, we failed. The seller had an excellent return policy and promptly refunded me that's why 4 stars. Wish it would have worked out!
    Rating: 4 stars [4 of 5 Stars!]
    By Dave Smith
    Date: June 03, 2020
    I knocked it down a bit on sturdiness because if you have ever worked in an office with one of these, this is NOT one of those bulletproof office versions. As long as you understand that you will have to be gentle with it I believe it will work fine... only time will tell... but so far so good!
    Rating: 5 stars [5 of 5 Stars!]
    Items 1 - 6 of 7 reviews
     1  2  [Next]