skip to footer block
HDL 2in Z Clip Hanger w/ 2 Holes P6646401HDL-EM7389-2 https://cdnimages.opentip.com/full/HDL/HDL-EM7389-2.jpg 2in Z Clip Hanger w/ 2 Holes Z-ClipsHanging things on the wall has never been easier. The easy to use Eagle-Clip _Z_ Clips are a fast and cost effective method to hang, fasten and secure any kind of wall panel, acoustical panel, partition, frame, cabinet, sign, mirror or piece of artwork.AluminumEasy and fast removal of panels2\" has hole centers at 1-3/8\"6 ft has hole centers at 8\"Extremely strong - load limits dependent on material and fasteners usedFasteners not included - 5mm (3/16\") holesHoles are not countersunkSold per each Z-Clips 2 inchProduct SKUColorSizeUnitEM7389 2Aluminum2 inchEA 6646401 00858983005013 0.0300lbs 0.00 0.00 0.00
EPCO
0.5200 2025-04-19 8012 In Stock
customer review - by , September 9, 2023
5/ 5stars
I love these wall hangers! The most important thing to do is make sure they are level and when everything is screwed in and your art, mirror, pictures, etc is hung, they are very close to the wall. There is hardly any gap between the wall and what you've hung up! Highly recommend!
customer review - by , May 5, 2023
5/ 5stars
Bought to hang a large 36 40 Robern bath mirror and it's HEAVY !these worked out perfectly.
customer review - by , March 3, 2023
5/ 5stars
Worked very well and.The price was great. They are very sturdy and they do the job that I needed them to..
customer review - by , January 1, 2023
5/ 5stars
These work well
customer review - by , January 1, 2023
5/ 5stars
Good heavy duty construction. Used these clips to secure back flange of shelf to wall.
customer review - by , November 11, 2022
5/ 5stars
The product is excellent. They hold pictures level and steady. However, it is absolutely necessary that you install them so that they are level which is sometimes easier said than done. When hanging a picture with one clip I discovered it was best to put in one screw using a drywall hanger level the clip and then put in a second screw without a drywall hanger. Otherwise it is necessary to put them on the wall level them and color in the place where the screws will go and then drill into those places exactly. The bottom line is that the clips are excellent but they require careful installation. If you were looking for something that will hold heavy objects or stop objects from moving such as pictures hung near a door, These do a great job.
customer review - by , October 10, 2022
5/ 5stars
I used these on a heavy wooden U.S. flag. They are very strong and easy to install.
customer review - by , October 10, 2022
5/ 5stars
Clean edges, great price. They have and offset for the mounting screws which I find annoying but is probably better for strength.
customer review - by , March 3, 2022
4/ 5stars
These are fine for hanging something on a wall vertically (like a big picture or some art) as long as the weight or force is down.They are not good for something sticking out from the wall horizontally (like a shelf, mantel, or game trophy) because they don't fit together tightly enough to hold the object close to the wall and the shelves droop down away from the wall.Pictures, bed headboard, anything hanging vertically is fine.
customer review - by , January 1, 2022
5/ 5stars
Negatives: No NegativesPositives: Good price Good quality material Quick delivery. Item as described
  »  
  »  
  »  
  »  

2in Z Clip Hanger w/ 2 Holes, Price/1 Piece

stars Rating 5 | 56 reviews
Brand EPCO
See other products from HDL
UPC: 00858983005013
SKU: HDL-EM7389-2
Price: $0.52
Promo: $0.47 Save 10% when you spend $99+ on select products Mix More
Quantity:
8012 In Stock
*  Click "Add to Cart" to calculate shipping and delivery time.
Share & Earn 10% Cash Back Best Price in Bulk

Product Description

Price is for 1 Piece.

Z-Clips

Hanging things on the wall has never been easier. The easy to use Eagle-Clip _Z_ Clips are a fast and cost effective method to hang, fasten and secure any kind of wall panel, acoustical panel, partition, frame, cabinet, sign, mirror or piece of artwork.

  • Aluminum
  • Easy and fast removal of panels
  • 2" has hole centers at 1-3/8"
  • 6 ft has hole centers at 8"
  • Extremely strong - load limits dependent on material and fasteners used
  • Fasteners not included - 5mm (3/16") holes
  • Holes are not countersunk


Sold per each
Z-Clips 2 inch



2in Z Clip Hanger w/ 2 Holes

warning tips WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov.

Return Policy

We do not accept returns if the product has been tried to be installed.
Need more information?
Our staff are available to answer any questions you may have about this item
Request More Information

Customer Reviews
5 out of 5
see all 56 reviews
5 stars
49
4 stars
7
3 stars
0
2 stars
0
1 stars
0
Write a Review
By A Customer
Date: March 24, 2022
These are fine for hanging something on a wall vertically (like a big picture or some art) as long as the weight or force is down.They are not good for something sticking out from the wall horizontally (like a shelf, mantel, or game trophy) because they don't fit together tightly enough to hold the object close to the wall and the shelves droop down away from the wall.Pictures, bed headboard, anything hanging vertically is fine.
Rating: 4 stars [4 of 5 Stars!]
By Joe from Illinois
Date: November 30, 2021
I'm generally satisfied with these, and I think they are a good value. Several reviews downgrade the product because the mounting holes are not drilled in alignment. However, this is not sloppy manufacture, but is done on purpose to avoid having two closely-spaced screw split the wood into which they are placed. The holes are not randomly positioned, but are offset by an identical amount in each piece. I agree with some of the reviews that instructions indicating this offset should have been provided in the packaging, and for this reason I gave 4 stars rather than 5.
Rating: 4 stars [4 of 5 Stars!]
By Sergei J. Bilcheck
Date: March 11, 2021
This product is a good buy if you are aware of one issue. The holes that are drilled are not level. Make sure you level the top of the product before you mark where the holes need to be drilled.
Rating: 4 stars [4 of 5 Stars!]
By Marko Zivanovic
Date: February 03, 2021
These z-clips have a 5/8 cleat, which do not fit the 12mm rail on the S534 board. Do not believe the customer support answers to other reviews.
Rating: 4 stars [4 of 5 Stars!]
By ths
Date: December 01, 2020
The clip does what it's suppose to do and works well. It's pretty basic, no frills. But one thing that you should be careful with is that the screw holes (two per plate) are not exactly horizontal. For some reason, the holes are offset by just a little bit, so if you drill two holes in your wall (or item) then install, you'll find the plate tilted.. My suggestion is to drill one hole and attach to wall (or item) first, move the plate so that it's horizontal then drill / screw the second hole.
Rating: 4 stars [4 of 5 Stars!]
By A Customer
Date: August 30, 2020
Did what it said.
Rating: 4 stars [4 of 5 Stars!]
Items 1 - 6 of 7 reviews
 1  2  [Next]