CWD 150367 / PBH 420 1 Pentek Bag Filter Housing with 1 inch Inlet/Outlet P7295007CWD-PENTEK-PBH-420-1 https://cdnimages.opentip.com/full/CWD/CWD-PENTEK-PBH-420-1.jpg 150367 / PBH 420 1 Pentek Bag Filter Housing with 1 inch Inlet/Outlet This Pentek 150367 PBH-420-1 1\" #20 bag vessel assembly is suitable for low flow rate residential, commercial, and industrial applications. The sump, cap, basket, vent plug, and drain plug are made of polypropylene for strength and resistance to chemicals and corrosion. The cap has a single large Acme thread closure for quick opening and secure closure, 1\" female National Pipe Thread Taper (NPT) threaded input and output connections, and a nitrile butadiene rubber (Buna-N) O-ring to ensure a watertight seal. The drain plug has a polyvinyl chloride (PVC) ball valve with Buna-N seals. This housing can be used with standard 4\" x 18.5\" filter bags (sold separately). It has an initial pressure drop of 1 pound per square inch (psi) at a flow rate of 15 gallons per minute (gpm), a maximum operating pressure of 90 psi, and a maximum operating temperature of 100 degrees F (37.8 degrees C). This bag vessel assembly is for use in various applications, including residential drinking water purification, food service, and industrial chemical filtration, among others.SpecificationsBag filter size (H x W) (sold separately) 18-1/2 x 4 inches (470 x 102 mm)Initial pressure drop at 15 gpm 1 psiMaximum temperature 100 degrees F (37.8 degrees C)Maximum pressure 90 psiMaximum dimensions (H x W) 23-3/8 x 7-1/4 inches (594 x 184 mm)H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.Water filters remove undesirable particles, chemicals, and microorganisms from water by means of a semipermeable barrier, adsorption, or biological processes. They are made of densely packed synthetic or natural fibers that trap suspended particles, materials that block microbes or adsorb unwanted chemicals, or substances that cause a chemical change, such as acid neutralization. For most residential, commercial, and industrial applications, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings. Filtration systems typically consist of a series of two or more types of filters, each designed to remove different contaminants. The performance of filters is measured by the minimum particle size that is blocked, the percentage of particles or microorganisms that are removed, the downstream concentration of unwanted chemicals, the maximum flow rate, and the amount of water that can be filtered before the filter must be replaced. Water filters are used in a wide range of applications, including drinking water purification, swimming pools, industrial processes, and irrigation, among others.Pentair manufactures industrial, commercial, and residential water filtration components and systems. The company, founded in 1966 and headquartered in Minneapolis, MN, meets International Organization for Standardization (ISO) standards 9001 and 14001 for quality assurance.What’s in the Box?PBH-420-1 bag vessel assemblyBismuth brass (lead- free) pressure gauge3/8\" drain valvewrench 7295007 051678503676 10.15lbs 25.00 7.50 7.50
Pentek
175.9500 2022-12-03 Out of Stock
Share to:

150367 / PBH-420-1 Pentek Bag Filter Housing with 1-inch Inlet/Outlet

Brand Pentek
See other products from CWD

Upc: 051678503676
SKU: CWD-PENTEK-PBH-420-1
Price: $175.95
Quantity:
Shipping:
$15.32 To [ 20149 ] Estimated Delivery Date: Dec 9, 2021 to Dec 13, 2021
Out of Stock
Click "Add to Shopping List" to save the item for later purchase. You can receive a notice email when it is back in stock.
Share & Earn 10% Cash Back Best Price in Bulk

You may also like

Optional related products

Product Description

This Pentek 150367 PBH-420-1 1" #20 bag vessel assembly is suitable for low flow rate residential, commercial, and industrial applications. The sump, cap, basket, vent plug, and drain plug are made of polypropylene for strength and resistance to chemicals and corrosion. The cap has a single large Acme thread closure for quick opening and secure closure, 1" female National Pipe Thread Taper (NPT) threaded input and output connections, and a nitrile butadiene rubber (Buna-N) O-ring to ensure a watertight seal. The drain plug has a polyvinyl chloride (PVC) ball valve with Buna-N seals. This housing can be used with standard 4" x 18.5" filter bags (sold separately). It has an initial pressure drop of 1 pound per square inch (psi) at a flow rate of 15 gallons per minute (gpm), a maximum operating pressure of 90 psi, and a maximum operating temperature of 100 degrees F (37.8 degrees C). This bag vessel assembly is for use in various applications, including residential drinking water purification, food service, and industrial chemical filtration, among others.
Specifications
Bag filter size (H x W) (sold separately) 18-1/2 x 4 inches (470 x 102 mm)
Initial pressure drop at 15 gpm 1 psi
Maximum temperature 100 degrees F (37.8 degrees C)
Maximum pressure 90 psi
Maximum dimensions (H x W) 23-3/8 x 7-1/4 inches (594 x 184 mm)
H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.
Water filters remove undesirable particles, chemicals, and microorganisms from water by means of a semipermeable barrier, adsorption, or biological processes. They are made of densely packed synthetic or natural fibers that trap suspended particles, materials that block microbes or adsorb unwanted chemicals, or substances that cause a chemical change, such as acid neutralization. For most residential, commercial, and industrial applications, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings. Filtration systems typically consist of a series of two or more types of filters, each designed to remove different contaminants. The performance of filters is measured by the minimum particle size that is blocked, the percentage of particles or microorganisms that are removed, the downstream concentration of unwanted chemicals, the maximum flow rate, and the amount of water that can be filtered before the filter must be replaced. Water filters are used in a wide range of applications, including drinking water purification, swimming pools, industrial processes, and irrigation, among others.
Pentair manufactures industrial, commercial, and residential water filtration components and systems. The company, founded in 1966 and headquartered in Minneapolis, MN, meets International Organization for Standardization (ISO) standards 9001 and 14001 for quality assurance.
What’s in the Box?
PBH-420-1 bag vessel assembly
Bismuth brass (lead- free) pressure gauge
3/8" drain valve
wrench

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov.
Need more information?
Our staff are available to answer any questions you may have about this item


Look Similar Items By Category


Customer Reviews
0 reviews
Be the first to review this item!

Your Recent History