06-01-14<br />This unit was installed after I had a new well drilled on my property.<br />Water was slightly red from the disturbed iron layer that the well drillers hit on the way to the water table.<br />Installation was a matter of hooking the water tank house feed pipe to the inlet of the filter housing and the house feed to the outlet of the filter.<br />There are "in " and "out" arrows on the housing for ease of installation.<br />I purchased 2 additional filters, Pentek DGD-5005 Spun Polypropylene Filter Cartridge, 10" x 4-1/2", 5 Microns, and an extra "O" ring, Pentek, Pentair Water 151122 Big Blue O-Ring Buna-N ORing.<br />The filter works great and the water tastes great also.<br /><br />07-01-14<br />I changed the filter today and the old filter was full of red iron sediment. It did the job perfectly. I feel that the next filter change will be almost clean of iron since the water from the tank, which is before the filter, is getting pretty clean now. All filter changes should now be at 90 day intervals or so.<br /><br />Filter change tip:<br />Hand loosen and hand tighten the blue canister to avoid damage to the "O" ring and or threads on the canister.<br />Clean the "O" ring and then lightly coat the ring with a touch of Vaseline Petroleum Jelly.<br />This keeps the ring from sticking to the upper housing and makes filter changes easy.<br />After the new filter is in place purge the filter by running a cold water tap at full blast for about 15 minutes.<br />You may notice the water getting very white and foamy. Not to worry, it will clear.<br />Once the water is clear and clean your done.<br />Enjoy your clean water.
Rating: [5 of 5 Stars!]