5 out of 5
150237 / HFPP-1-PR10 Pentek Big Blue Whole House 10 inch Filter Housing
* Click "Add to Shopping List" to save the item for later purchase. You can receive a notice email when it is back in stock.
Product Description
This Pentek 150237 1” #10 Big Blue filter housing with pressure relief is suitable for high-flow and heavy sediment applications. The opaque blue sump is made of reinforced polypropylene for strength and resistance to chemicals, and the black cap is made of high-flow polypropylene (HFPP) for stiffness. The black cap has 1” female National Pipe Thread Taper (NPT) threaded input and output connections and a nitrile butadiene rubber (Buna-N) O-ring to ensure a watertight seal. A pressure relief button on the inlet side of the cap releases pressure in the housing for changing filter cartridges. The housing can be used with a 10” x 4-1/2” filter cartridge (sold separately). It has an initial pressure drop of 1 pound per square inch (psi) at a flow rate of 15 gallons per minute (gpm), a maximum operating pressure of 100 psi, and a maximum operating temperature of 100 degrees F (37.8 degrees C). This filter housing meets National Sanitation Foundation/American National Standards Institute (NSF/ANSI) standard 42 for quality assurance, and is for use in various high-flow applications, including residential drinking water filtration, food service, and irrigation, among others.
Specifications
Filter cartridge size (H x W) (sold separately) 10 x 4-1/2 inches (254 x 114 mm)
Initial pressure drop at 15 gpm 1 psi
Maximum temperature 100 degrees F (37.8 degrees C)
Maximum pressure 100 psi
Maximum dimensions (H x W) 13-1/8 x 7-1/4 inches (333 x 184 mm)
Materials and structural integrity certification NSF/ANSI standard 42
H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.
Water filters remove undesirable particles, chemicals, and microorganisms from water by means of a semipermeable barrier, adsorption, or biological processes. They are made of densely packed synthetic or natural fibers that trap suspended particles, materials that block microbes or adsorb unwanted chemicals, or substances that cause a chemical change, such as acid neutralization. For most residential, commercial, and industrial applications, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings. Filtration systems typically consist of a series of two or more types of filters, each designed to remove different contaminants. The performance of filters is measured by the minimum particle size that is blocked, the percentage of particles or microorganisms that are removed, the downstream concentration of unwanted chemicals, the maximum flow rate, and the amount of water that can be filtered before the filter must be replaced. Water filters are used in a wide range of applications, including drinking water purification, swimming pools, industrial processes, and irrigation, among others.
Pentair manufactures industrial, commercial, and residential water filtration components and systems. The company, founded in 1966 and headquartered in Minneapolis, MN, meets International Organization for Standardization (ISO) standards 9001 and 14001 for quality assurance.
Specifications
Filter cartridge size (H x W) (sold separately) 10 x 4-1/2 inches (254 x 114 mm)
Initial pressure drop at 15 gpm 1 psi
Maximum temperature 100 degrees F (37.8 degrees C)
Maximum pressure 100 psi
Maximum dimensions (H x W) 13-1/8 x 7-1/4 inches (333 x 184 mm)
Materials and structural integrity certification NSF/ANSI standard 42
H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.
Water filters remove undesirable particles, chemicals, and microorganisms from water by means of a semipermeable barrier, adsorption, or biological processes. They are made of densely packed synthetic or natural fibers that trap suspended particles, materials that block microbes or adsorb unwanted chemicals, or substances that cause a chemical change, such as acid neutralization. For most residential, commercial, and industrial applications, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings. Filtration systems typically consist of a series of two or more types of filters, each designed to remove different contaminants. The performance of filters is measured by the minimum particle size that is blocked, the percentage of particles or microorganisms that are removed, the downstream concentration of unwanted chemicals, the maximum flow rate, and the amount of water that can be filtered before the filter must be replaced. Water filters are used in a wide range of applications, including drinking water purification, swimming pools, industrial processes, and irrigation, among others.
Pentair manufactures industrial, commercial, and residential water filtration components and systems. The company, founded in 1966 and headquartered in Minneapolis, MN, meets International Organization for Standardization (ISO) standards 9001 and 14001 for quality assurance.
Attention CA Residents: Prop 65 Warning
WARNING:
This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov.
Need more information?
Our staff are available to answer any questions you may have about this item
Our staff are available to answer any questions you may have about this item
Look Similar Items By Category
Customer Reviews
By al stone
Date: August 11, 2023
Good sturdy design
Rating: 
[4 of 5 Stars!]
[4 of 5 Stars!]
By A-Buyer
Date: July 30, 2023
Perfect fit for our replacement
Rating: 
[5 of 5 Stars!]
[5 of 5 Stars!]
By J
Date: July 03, 2023
J
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By Patrick A.
Date: June 10, 2023
Great filter housing when combined with the correct filter.
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By Ben N.
Date: June 01, 2023
This filter was installed in an irrigation system that's fed from a well. It filters any rust from the water that's used in a greenhouse. It's good practice to put a pressure gage before and after a filter or strainer. The gage after will tell you when the filter element will need changed
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By Robert
Date: March 22, 2023
So I read that these leak and are nothing but issues. But I couldnt resist due to the price compared to other brands. I bought 6 of the 4.5x10 versions and figured people just werent really that knowledgeable on pluming. Let me tell you they definitely leak. The lower portion that holds the filter has a very small indent thats supposed to hold the o-ring and the head unit where the o-ring seals against is not flat finished so the basic supplied o-ring really need to be squeezed super super tight inorder to get it to seal. Also the lip is not substantial enough to hold the o-ring in place so you must be very careful. One came with silicon grease so I applied it to all the orings to help hold them in place. even then you may find for the first few days its leak free to later find your basement floor covered in water because it decided to leak again. Im going to try a silicone type o-ring (softer material) and see if it seals the imperfect surface better. The filter assembly is only rated for 75psi and 100psi max. My system is 55psi from the well and 75 psi from the internal pump. In order to tighten them I had one guy hold the fixture while I used a 30 ratchet to tighten it on TIGHT AS I COULD. As of now the leaks have stopped but I dont trust it.Pro; definitely made of solid material and looks as though theres a spot for a pressure gauge if you drill and tap it.
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]