CWD 150233 / HFPP 1 PR20 Pentek Big Blue Whole House 20 inch Filter Housing P7294827CWD-PENTEK-HFPP-PR20 https://cdnimages.opentip.com/full/CWD/CWD-PENTEK-HFPP-PR20.jpg 150233 / HFPP 1 PR20 Pentek Big Blue Whole House 20 inch Filter Housing This Pentek 150233 20-BB 1” #20 Big Blue filter housing with pressure relief is suitable for high-flow and heavy sediment applications. The opaque blue sump is made of reinforced polypropylene for strength and resistance to chemicals, and the black cap is made of high-flow polypropylene (HFPP) for stiffness. The black cap has 1” female National Pipe Thread Taper (NPT) threaded input and output connections and a nitrile butadiene rubber (Buna-N) O-ring to ensure a watertight seal. A pressure relief button on the inlet side of the cap releases pressure in the housing for changing filter cartridges. The housing can be used with a 20” x 4-1/2” filter cartridge (sold separately). It has an initial pressure drop of 1 pound per square inch (psi) at a flow rate of 15 gallons per minute (gpm), a maximum operating pressure of 90 psi, and a maximum operating temperature of 100 degrees F (37.8 degrees C). This filter housing meets National Sanitation Foundation/American National Standards Institute (NSF/ANSI) standard 42 for quality assurance, and is for use in various high-flow applications, including residential drinking water filtration, food service, and irrigation, among others.SpecificationsFilter cartridge size (H x W) (sold separately) 20 x 4-1/2 inches (508 x 114 mm)Initial pressure drop at 15 gpm 1 psiMaximum temperature 100 degrees F (37.8 degrees C)Maximum pressure 90 psiMaximum dimensions (H x W) 23-3/8 x 7-1/4 inches (594 x 184 mm)Materials and structural integrity certification NSF/ANSI standard 42H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.Water filters remove undesirable particles, chemicals, and microorganisms from water by means of a semipermeable barrier, adsorption, or biological processes. They are made of densely packed synthetic or natural fibers that trap suspended particles, materials that block microbes or adsorb unwanted chemicals, or substances that cause a chemical change, such as acid neutralization. For most residential, commercial, and industrial applications, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings. Filtration systems typically consist of a series of two or more types of filters, each designed to remove different contaminants. The performance of filters is measured by the minimum particle size that is blocked, the percentage of particles or microorganisms that are removed, the downstream concentration of unwanted chemicals, the maximum flow rate, and the amount of water that can be filtered before the filter must be replaced. Water filters are used in a wide range of applications, including drinking water purification, swimming pools, industrial processes, and irrigation, among others.Pentair manufactures industrial, commercial, and residential water filtration components and systems. The company, founded in 1966 and headquartered in Minneapolis, MN, meets International Organization for Standardization (ISO) standards 9001 and 14001 for quality assurance. 7294827 799932591303 9.75lbs 23.75 7.25 7.25
Pentek
45.5700 2023-01-17 101 In Stock
customer review - by , January 1, 2018
5/ 5stars
Filters all installed without any issues, make sure you use all the silicone that comes with each filter on the O ring so that it slightly sticks in the grove. This will enable a good seal as one filter housings initially had a minor leak and it was solved by just adding more silicone. Used 5/16 x 1 in Hex Head bolts to install the housing to the separately purchased brackets.
customer review - by , January 1, 2018
5/ 5stars
Works great!
customer review - by , December 12, 2017
5/ 5stars
Still in service. Works great
customer review - by , December 12, 2017
3/ 5stars
The housings look ok but the head on one of the units had one of the filter guides broken off. Was in the bottom of the canister when I opened it. Do not believe it will effect the performance or the filter change unless more start breaking off.
customer review - by , December 12, 2017
5/ 5stars
I bought 3 of these and installed the system. the first is a 5005DG filter (50 micron outer core and 5 micron inner core) the second is a single stage 1 micron and then a carbon filter. The set up was time consuming because I've never done anything like this but I figured it out. Because of the size of these filters they are able to filter so much more than the 10" this system replaced and I have no noticeable pressure drop on well water.
customer review - by , October 10, 2017
5/ 5stars
These "Big Blues" are well known and work great. I've got two big blues installed in series. The first has a sediment filter, and the 2nd has a carbon block filter. The only issues I've had with these is I've had several carbon filters that where too small in diameter to properly line up in the filter housing which causes water to bypass the filter. All the sediment filters I've used have lined up perfectly.
I also purchased theHousing Bracket for Big blue 10" and 20" filter housingsandPentek SW-4 Plastic Filter Wrench used on Big Blue Filter Systems. I'd suggest you do the same since it doesn't come with either. You wouldn't want to try to use these big blues without the mounting hardware as they weigh too much once they fill with water.
customer review - by , October 10, 2017
5/ 5stars
Installation was simple. Used 5/16 1” lag bolt with washer
customer review - by , September 9, 2017
5/ 5stars
Ordered arrived promptly.. and was what I expected. :)
customer review - by , September 9, 2017
5/ 5stars
Our last house had a single one of these on it. After some research, I decided I wanted to do something even more. I purchased 3 of these and the mounting brackets, 4 Simmons 100 psi pressure gauges, and 3 filters (50 to 5 micron, 25 to 1 micron, and a carbon block filter). I used sharkbite fittings to attach to the incoming water line, then pvc for the rest of my build. 1 gauge to monitor the incoming pressure, and the other 3 after each filter housing. My incoming water line is 3/4", I went with 1" pvc pipe to make sure I didn't have any pressure loss while the water flows through the filter system. I also included a bypass for easy filter changes, or whatever else it might be needed for. It turned out great. I have 0 pressure loss according to all 4 gauges. If you read directions and watch some youtube videos, which I did, I didn't have a single leak in my entire system. I have never done plumbing before, but consider myself to be an advanced level DIY'er.
customer review - by , September 9, 2017
3/ 5stars
Ordered 3 units - 1 came with o-ring and silicone lubricant, 1 came with o-ring only (missing silicone) and one came missing both o-ring and silicone.
Share to:

150233 / HFPP-1-PR20 Pentek Big Blue Whole House 20 inch Filter Housing

stars Rating 5 | 106 reviews
Brand Pentek
See other products from CWD

Upc: 799932591303
SKU: CWD-PENTEK-HFPP-PR20
Price: $45.57
Quantity:
Shipping:
$16.84 To [ 20149 ] Estimated Delivery Date: Jan 21, 2022 to Jan 25, 2022
101 In Stock
Share & Earn 10% Cash Back Best Price in Bulk

You may also like

Optional related products

Product Description

This Pentek 150233 20-BB 1” #20 Big Blue filter housing with pressure relief is suitable for high-flow and heavy sediment applications. The opaque blue sump is made of reinforced polypropylene for strength and resistance to chemicals, and the black cap is made of high-flow polypropylene (HFPP) for stiffness. The black cap has 1” female National Pipe Thread Taper (NPT) threaded input and output connections and a nitrile butadiene rubber (Buna-N) O-ring to ensure a watertight seal. A pressure relief button on the inlet side of the cap releases pressure in the housing for changing filter cartridges. The housing can be used with a 20” x 4-1/2” filter cartridge (sold separately). It has an initial pressure drop of 1 pound per square inch (psi) at a flow rate of 15 gallons per minute (gpm), a maximum operating pressure of 90 psi, and a maximum operating temperature of 100 degrees F (37.8 degrees C). This filter housing meets National Sanitation Foundation/American National Standards Institute (NSF/ANSI) standard 42 for quality assurance, and is for use in various high-flow applications, including residential drinking water filtration, food service, and irrigation, among others.
Specifications
Filter cartridge size (H x W) (sold separately) 20 x 4-1/2 inches (508 x 114 mm)
Initial pressure drop at 15 gpm 1 psi
Maximum temperature 100 degrees F (37.8 degrees C)
Maximum pressure 90 psi
Maximum dimensions (H x W) 23-3/8 x 7-1/4 inches (594 x 184 mm)
Materials and structural integrity certification NSF/ANSI standard 42
H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.
Water filters remove undesirable particles, chemicals, and microorganisms from water by means of a semipermeable barrier, adsorption, or biological processes. They are made of densely packed synthetic or natural fibers that trap suspended particles, materials that block microbes or adsorb unwanted chemicals, or substances that cause a chemical change, such as acid neutralization. For most residential, commercial, and industrial applications, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings. Filtration systems typically consist of a series of two or more types of filters, each designed to remove different contaminants. The performance of filters is measured by the minimum particle size that is blocked, the percentage of particles or microorganisms that are removed, the downstream concentration of unwanted chemicals, the maximum flow rate, and the amount of water that can be filtered before the filter must be replaced. Water filters are used in a wide range of applications, including drinking water purification, swimming pools, industrial processes, and irrigation, among others.
Pentair manufactures industrial, commercial, and residential water filtration components and systems. The company, founded in 1966 and headquartered in Minneapolis, MN, meets International Organization for Standardization (ISO) standards 9001 and 14001 for quality assurance.

warning tips WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov.

Note

This product is not eligible for coupon code discount, for we've been offering the best price in the market.
Need more information?
Our staff are available to answer any questions you may have about this item


Look Similar Items By Category


Customer Reviews
By PeteReviews
Date Added: Wednesday 17 January, 2018
Filters all installed without any issues, make sure you use all the silicone that comes with each filter on the O ring so that it slightly sticks in the grove. This will enable a good seal as one filter housings initially had a minor leak and it was solved by just adding more silicone. Used 5/16 x 1 in Hex Head bolts to install the housing to the separately purchased brackets.
Rating: 5 stars [5 of 5 Stars!]
By Todd Stam
Date Added: Wednesday 03 January, 2018
Works great!
Rating: 5 stars [5 of 5 Stars!]
By Becky
Date Added: Thursday 28 December, 2017
Still in service. Works great
Rating: 5 stars [5 of 5 Stars!]
By thomas meendering
Date Added: Thursday 07 December, 2017
The housings look ok but the head on one of the units had one of the filter guides broken off. Was in the bottom of the canister when I opened it. Do not believe it will effect the performance or the filter change unless more start breaking off.
Rating: 3 stars [3 of 5 Stars!]
By Lance
Date Added: Monday 04 December, 2017
I bought 3 of these and installed the system. the first is a 5005DG filter (50 micron outer core and 5 micron inner core) the second is a single stage 1 micron and then a carbon filter. The set up was time consuming because I've never done anything like this but I figured it out. Because of the size of these filters they are able to filter so much more than the 10" this system replaced and I have no noticeable pressure drop on well water.
Rating: 5 stars [5 of 5 Stars!]
By Tex
Date Added: Saturday 28 October, 2017
These &#34;Big Blues&#34; are well known and work great. I've got two big blues installed in series. The first has a sediment filter, and the 2nd has a carbon block filter. The only issues I've had with these is I've had several carbon filters that where too small in diameter to properly line up in the filter housing which causes water to bypass the filter. All the sediment filters I've used have lined up perfectly.<br />I also purchased theHousing Bracket for Big blue 10&#34; and 20&#34; filter housingsandPentek SW-4 Plastic Filter Wrench used on Big Blue Filter Systems. I'd suggest you do the same since it doesn't come with either. You wouldn't want to try to use these big blues without the mounting hardware as they weigh too much once they fill with water.
Rating: 5 stars [5 of 5 Stars!]
Items 1 - 6 of 106 reviews
 1  2  3  4  5 ...  [Next] 

Your Recent History