skip to footer block
NWH Rig Rite 300 Trolling Motor Transducer Bracket P4137787NWH-300 https://cdnimages.opentip.com/full/NWH/NWH-300.jpg Rig Rite 300 Trolling Motor Transducer Bracket Manufacturer Part Number: 300Allows transom transducer to be mounted on trolling motors. Made of marine grade aluminum, black powder coated. Fits transom transducers made by Lowrance, Eagle, Humminbird, Bottom Line and Zercom. Fits Minnkota and Motorguide trolling motors.FeatureBlack powder coatedAllows transom transducer to be mounted on trolling motorsMade of marine grade aluminum, black powder coatedFits transom transducers made by Lowrance, Eagle, Humminbird, Bottom Line and Zercom 4137787 785311003000 1.0900lbs 9.50 2.25 6.00
Rig Rite Manufacturing
14.6400 2025-04-24 Out of Stock
customer review - by , February 2, 2018
4/ 5stars
Very early in process with this project to install Humminbird Helix 7 Gen 2 DI and SI transducer on Motorguide Xi3 Trolling Motor.... Thought I would go this route vs Transducer Shield mount to save a little money... Having read the reviews prior to purchase I was expecting to need to make this mount work vs just putting it on.... Main thing I’d read was the transducer seemed to move a lot in the other reviews so I planned to work to eliminate the movement from the start.... I took the supplied transom mount apparatus and sawed it off with hacksaw leaving the Ratchet Clamp arms attached to the base then began removing material... Ultimately I had to separate arms from the base as 3/4” is all the space available in center of mount between the screw and base.... Using a Dremel with rasp bit, I removed material then checked fit... Painstaking but worth the work.... Additionally, I didn’t use the supplied nylon spacers as I felt they allowed movement, opting for Stainless Steel 1/4” flatwashers ... Needing approximately 1/4” tall stack of washers each side... A bit of trouble getting all of these parts in between the arms of the mount and on the screw that is supplied but doable... I feel this a good mount but Rig Rite should spend a bit more time on it to make these sort of adaptations unneeded.... I’d recommend this if you have a slim budget and are capable of working with your hands...
customer review - by , January 1, 2018
5/ 5stars
Seems well made and strong enough. Worked with my humming bird transducer just fine. Put it on a minn kota 70lb thrust trolling motor and it fit just fine.
customer review - by , October 10, 2017
4/ 5stars
The spacers in it are not quite the right size for my Humminbird transducer but I just used a couple of stainless steel washers to make it fit.
customer review - by , September 9, 2017
4/ 5stars
This is a great mount for your transducer on your trolling motor. It is well built and was cheaper than most. I did have to make my own shims and get a new bolt with locknut, but was worth it.
customer review - by , July 7, 2017
5/ 5stars
It arrived on time and did everything it claimed to.
customer review - by , June 6, 2017
5/ 5stars
I'm pleased, no more than pleased. Easy to install, tougher that plastic original, I believe this bracket will be with me till the end of the trolling motor.
customer review - by , March 3, 2017
5/ 5stars
Worked great for my humminbird transducer. I found that you have to use the transom mount in conjunction with it to make sit right.
customer review - by , September 9, 2016
3/ 5stars
transducer is loose with this application, I had to use washers to make it tight so it would stay straight. poor design in that respect but a good idea if you can make it work
customer review - by , August 8, 2016
4/ 5stars
Haven't used yet but looks like it will do what I need it to do.
customer review - by , July 7, 2016
5/ 5stars
Perfect fit to my minn kota trolling motor.
  »  
  »  
  »  
  »  
  »  

Rig Rite 300 Trolling Motor Transducer Bracket

stars Rating 4.5 | 16 reviews
Brand Rig Rite Manufacturing
Shop more from NWH
UPC: 785311003000
SKU: NWH-300
List Price: $17.30
Price: $14.64
You Save: $2.66 (15%)
Quantity:
Out of Stock
*  Click "Add to Shopping List" to save the item for later purchase. You can receive a notice email when it is back in stock.
Share & Earn 10% Cash Back Best Price in Bulk

Product Description

Manufacturer Part Number: 300

Allows transom transducer to be mounted on trolling motors. Made of marine grade aluminum, black powder coated. Fits transom transducers made by Lowrance, Eagle, Humminbird, Bottom Line and Zercom. Fits Minnkota and Motorguide trolling motors.

Feature

  • Black powder coated
  • Allows transom transducer to be mounted on trolling motors
  • Made of marine grade aluminum, black powder coated
  • Fits transom transducers made by Lowrance, Eagle, Humminbird, Bottom Line and Zercom

    • warning tips WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov.

    Specifications

    Return Policy

    Return could only be applied within 7 days after delivery.
    Need more information?
    Our staff are available to answer any questions you may have about this item
    Request More Information

    Customer Reviews
    4.5 out of 5
    see all 16 reviews
    5 stars
    10
    4 stars
    4
    3 stars
    2
    2 stars
    0
    1 stars
    0
    Write a Review
    By John R. Petrea
    Date: February 18, 2018
    Very early in process with this project to install Humminbird Helix 7 Gen 2 DI and SI transducer on Motorguide Xi3 Trolling Motor.... Thought I would go this route vs Transducer Shield mount to save a little money... Having read the reviews prior to purchase I was expecting to need to make this mount work vs just putting it on.... Main thing I’d read was the transducer seemed to move a lot in the other reviews so I planned to work to eliminate the movement from the start.... I took the supplied transom mount apparatus and sawed it off with hacksaw leaving the Ratchet Clamp arms attached to the base then began removing material... Ultimately I had to separate arms from the base as 3/4” is all the space available in center of mount between the screw and base.... Using a Dremel with rasp bit, I removed material then checked fit... Painstaking but worth the work.... Additionally, I didn’t use the supplied nylon spacers as I felt they allowed movement, opting for Stainless Steel 1/4” flatwashers ... Needing approximately 1/4” tall stack of washers each side... A bit of trouble getting all of these parts in between the arms of the mount and on the screw that is supplied but doable... I feel this a good mount but Rig Rite should spend a bit more time on it to make these sort of adaptations unneeded.... I’d recommend this if you have a slim budget and are capable of working with your hands...
    Rating: 4 stars [4 of 5 Stars!]
    By Mark C.
    Date: January 10, 2018
    Seems well made and strong enough. Worked with my humming bird transducer just fine. Put it on a minn kota 70lb thrust trolling motor and it fit just fine.
    Rating: 5 stars [5 of 5 Stars!]
    By C. E. Brown
    Date: October 19, 2017
    The spacers in it are not quite the right size for my Humminbird transducer but I just used a couple of stainless steel washers to make it fit.
    Rating: 4 stars [4 of 5 Stars!]
    By Ricky
    Date: September 22, 2017
    This is a great mount for your transducer on your trolling motor. It is well built and was cheaper than most. I did have to make my own shims and get a new bolt with locknut, but was worth it.
    Rating: 4 stars [4 of 5 Stars!]
    By A Customer
    Date: July 01, 2017
    It arrived on time and did everything it claimed to.
    Rating: 5 stars [5 of 5 Stars!]
    By Virgil D. Gosch
    Date: June 03, 2017
    I'm pleased, no more than pleased. Easy to install, tougher that plastic original, I believe this bracket will be with me till the end of the trolling motor.
    Rating: 5 stars [5 of 5 Stars!]
    Items 1 - 6 of 16 reviews
     1  2  3  [Next]