5 out of 5
Stahl Tools STSSVT Variable Temperature Soldering Iron Station
* Click "Add to Cart" to calculate shipping and delivery time.
Pricing Note
Product Description
Manufacturer Part Number: STSSVT
The Stahl Tools STSSVT variable temperature soldering station was designed to exceed the expectations of veteran technicians -- at a price that's appealing to the electronics hobbyist.
Key Features:
Stahl Tools STSSVT Variable Temperature Soldering Iron Station
Make connections that last! A Stahl Tools STSSVT variable temperature soldering station provides the adjustability demanded by professionals, but offers it at a price that enables anyone to solder better. Total control over a soldering iron's heat is one sure way of making perfect electronic terminations every time, no matter the job's size.
Many different soldering tasks are accomplished easily by using the STSSVT's adjustable 5 to 40 watt (150°C to 450°C temperature) adjustment. The lightweight pencil design features a fatigue-reducing rubber grip, and a Bakelite-ringed holder keeps the iron at the ready. A field replaceable, precision ground, iron-plated solid copper tip provides maximum heat transfer, minimizing cold solder joints. Includes 1.5 mm conical soldering tip and cleaning sponge. Additional tips available for a variety of soldering applications. Stahl Tools-The Technician's Friend™.
Tip Replacement and Dressing:
Tip replacement or cleaning should be done only when the iron is at room temperature. The tip can be changed or replaced simply by unscrewing the knurled nut from the barrel assembly. The station must be switched off and allowed to cool before and during this operation, as damage may result if the system is left on without the tip installed. After removing the tip, blow out any oxide dust that may have formed in the tip retaining area of the barrel. Be careful to avoid getting debris in your eyes. Replace the tip and screw the retaining knurled nut onto the barrel assembly; tighten only finger-tight. To avoid burning your fingers, pliers should only be used to tighten the nut if it becomes loose when the iron is hot. Care should be taken not to overtighten, as this can damage the element.
General Cleaning:
The outer case of the iron or station may be cleaned with a damp cloth using a small amount of liquid detergent. Never submerse the unit in liquid or allow any liquid to enter the case of the station. Never use solvent to clean the case.
Maintenance:
The iron should be placed in its stand when not in use. If the supply cord becomes damaged, it must be replaced by a qualified service technician.
The Stahl Tools STSSVT variable temperature soldering station was designed to exceed the expectations of veteran technicians -- at a price that's appealing to the electronics hobbyist.
Key Features:
- On/off switch with "power-on" indicator light showing when the iron is hot
- Variable 302°F to 842°F heat setting to match specific soldering needs
- ETL certified for safety and performance
- Cushioned rubber grip for extended comfortable use
- Replaceable tips provide additional functionality
- Quality performance at a discount price
Stahl Tools STSSVT Variable Temperature Soldering Iron Station
Make connections that last! A Stahl Tools STSSVT variable temperature soldering station provides the adjustability demanded by professionals, but offers it at a price that enables anyone to solder better. Total control over a soldering iron's heat is one sure way of making perfect electronic terminations every time, no matter the job's size.
Many different soldering tasks are accomplished easily by using the STSSVT's adjustable 5 to 40 watt (150°C to 450°C temperature) adjustment. The lightweight pencil design features a fatigue-reducing rubber grip, and a Bakelite-ringed holder keeps the iron at the ready. A field replaceable, precision ground, iron-plated solid copper tip provides maximum heat transfer, minimizing cold solder joints. Includes 1.5 mm conical soldering tip and cleaning sponge. Additional tips available for a variety of soldering applications. Stahl Tools-The Technician's Friend™.
Tip Replacement and Dressing:
Tip replacement or cleaning should be done only when the iron is at room temperature. The tip can be changed or replaced simply by unscrewing the knurled nut from the barrel assembly. The station must be switched off and allowed to cool before and during this operation, as damage may result if the system is left on without the tip installed. After removing the tip, blow out any oxide dust that may have formed in the tip retaining area of the barrel. Be careful to avoid getting debris in your eyes. Replace the tip and screw the retaining knurled nut onto the barrel assembly; tighten only finger-tight. To avoid burning your fingers, pliers should only be used to tighten the nut if it becomes loose when the iron is hot. Care should be taken not to overtighten, as this can damage the element.
General Cleaning:
The outer case of the iron or station may be cleaned with a damp cloth using a small amount of liquid detergent. Never submerse the unit in liquid or allow any liquid to enter the case of the station. Never use solvent to clean the case.
Maintenance:
The iron should be placed in its stand when not in use. If the supply cord becomes damaged, it must be replaced by a qualified service technician.
Product Details | |
|---|---|
| Brand | Stahl Tools |
| Model | STSSVT |
| Part Number | 374-100 |
| UPC | 844632077272 |
| Unit of Measure | Each |
| Weight | 1.75 |
Attention CA Residents: Prop 65 Warning
WARNING:
This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov.
Need more information?
Our staff are available to answer any questions you may have about this item
Our staff are available to answer any questions you may have about this item
Customer Reviews
By Herschel Honea
Date: November 28, 2022
I found the soldering iron holder very desirable, it sure beats what I was using to hold the iron, which I will not mention'. It is an all-around soldering station for precise soldering.
Rating: 
[5 of 5 Stars!]
[5 of 5 Stars!]
By Alan Hie
Date: December 31, 2021
Good for the price. Used it to solder capacitors on my computer monitor board
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By M. Simon
Date: October 08, 2021
I have been soldering for 66 years. I still have a Weller/Unger 45 watt pencil tip with a light dimmer temperature control I use for nostalgia sake. I do surface mount parts. This Stahl iron is perfect. I even converted one to a hot air iron using an aquarium air pump. My maker's space bought four because of quality and price. It is not only a good iron. It is a good deal.
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By Ken
Date: September 26, 2021
Works great
Rating: 
[4 of 5 Stars!]
[4 of 5 Stars!]
By Justin
Date: June 03, 2021
My title says it all. Months ago now, I bought a BAKON 90W Soldering Iron Station. I haven't even opened it. I figured once I got good with the Stahl, I'd start using the higher quality unit. Well after MANY solder job and circuits built, the BAKON remains in it's box! I cannot part with this little station! Something about it! The temperature gauge works great. Sometimes the iron's tread (to hold the solder tip) comes slightly( loose. I remedy it while hot with a pair of need nose pliers. It's not an every use occurrence either. And with metal heating up that much and cooling down, this is to be expected. The sponge the until came with won't stay taped down after one use lol! (I don't know why you taped the sponge down Stahl, it's fine without it! Trust me!) I do use the sponge as you should always keep a wet sponge nearby when soldering whether you use a metal brillo clear or not. I use the Hakko gold metal cleaner in combination with this, some ti tinner, and some Kester 60/40. I am a soldering EXPERT! The right tools make THE WORLD OF DIFFERENCE! AND KNOWING TO KEEP YOUR TIP TINNED! I LOVE this station and there is ZERO reason it shouldn't help you get any solder done DONE! 4 stars for Accuracy as for I cannot attest for its accuracy but it's held its EXCELLENTLY accuracy as far as where the Temperature potentiometer is set! And it STILL holding the same temps as it was when it was brand new! So I gave it 4 since I'm not measuring a solder iron/don't have the tools to do that. If you won this station, you WILL develop a feel for the Temperature pot/knob.
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By Juan carlos lopez
Date: May 15, 2021
Buen producto
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]