0 reviews
Be the first to review this item!
Dayton Audio DAEX13CT-8 Coin Type 13mm Exciter 3W 8 Ohm
Brand Dayton Audio
Shop more from PEX
* Click "Add to Cart" to calculate shipping and delivery time.
Pricing Note
Product Description
Manufacturer Part Number: DAEX13CT-8
Take your product or project to the next level by turning it into a speaker! The DAEX13CT-8 sound exciter, by Dayton Audio, is designed to turn small surfaces into a hidden sound source.
Key Features:
Dayton Audio DAEX13CT-8 Coin Type 13mm Exciter 3W 8 Ohm
Dayton Audio's 13 mm DAEX13CT-8 coin type exciter features the same ability to turn nearly any surface into a speaker, as other exciters and tactile transducers, only in a more compact package for working with smaller surfaces. This exciter's small size enables audio reproduction in places never imagined: toys, monitors, cabinet doors... even windows!
A neodymium magnet is employed to create maximum magnetic flux around the proprietary voice coil for increased sensitivity when compared to similar sized exciters. In turn, this reduces power requirements and makes it possible to use very small audio amplifiers, without sacrificing total output. Its 8-ohm nominal impedance facilitates the use of parallel and series-parallel wired arrays for a highly focused, minimum dispersion sound pattern.
To ensure maximum acoustic energy transfer between the transducer and the surface to which it is attached, 3M VHB (Very High Bond) adhesive is pre-applied... just peel and stick! Two PCB solder points keep installation and wiring as compact as possible.
Note: An exciter's frequency response and sensitivity are completely dependent on the exciter's designated surface. Thinner, smaller materials will tend to be louder and create a mid/tweeter response. Thicker, larger materials (with multiple exciters) will be slightly quieter but result in a more full-range sound.
Specifications: Power handling: 3 watts RMS VCdia: 13 mm Nominal impedance: 8 ohms Re: 7.3 ohms Le: 0.08 mH Fs: 775 Hz Dimensions: 1.04" (26.3 mm) dia. x 0.374" (9.5 mm) H Adhesive dimensions: 0.62" (15.7 mm) outside diameter Weight: 12.5 grams.
To learn more about Dayton Audio Exciters, and for help on which Exciter is right for you, check out .
Take your product or project to the next level by turning it into a speaker! The DAEX13CT-8 sound exciter, by Dayton Audio, is designed to turn small surfaces into a hidden sound source.
Key Features:
- Super small size; just over an inch in diameter, about 3/8" high
- Pre-applied 3M™ VHB™ adhesive for quick, durable installation
- Rare-earth neodymium motor
- 8-ohm impedance for use with small, Class D amplifiers
Dayton Audio DAEX13CT-8 Coin Type 13mm Exciter 3W 8 Ohm
Dayton Audio's 13 mm DAEX13CT-8 coin type exciter features the same ability to turn nearly any surface into a speaker, as other exciters and tactile transducers, only in a more compact package for working with smaller surfaces. This exciter's small size enables audio reproduction in places never imagined: toys, monitors, cabinet doors... even windows!
A neodymium magnet is employed to create maximum magnetic flux around the proprietary voice coil for increased sensitivity when compared to similar sized exciters. In turn, this reduces power requirements and makes it possible to use very small audio amplifiers, without sacrificing total output. Its 8-ohm nominal impedance facilitates the use of parallel and series-parallel wired arrays for a highly focused, minimum dispersion sound pattern.
To ensure maximum acoustic energy transfer between the transducer and the surface to which it is attached, 3M VHB (Very High Bond) adhesive is pre-applied... just peel and stick! Two PCB solder points keep installation and wiring as compact as possible.
Note: An exciter's frequency response and sensitivity are completely dependent on the exciter's designated surface. Thinner, smaller materials will tend to be louder and create a mid/tweeter response. Thicker, larger materials (with multiple exciters) will be slightly quieter but result in a more full-range sound.
Specifications: Power handling: 3 watts RMS VCdia: 13 mm Nominal impedance: 8 ohms Re: 7.3 ohms Le: 0.08 mH Fs: 775 Hz Dimensions: 1.04" (26.3 mm) dia. x 0.374" (9.5 mm) H Adhesive dimensions: 0.62" (15.7 mm) outside diameter Weight: 12.5 grams.
To learn more about Dayton Audio Exciters, and for help on which Exciter is right for you, check out .
Product Details | |
|---|---|
| Brand | Dayton Audio |
| Model | DAEX13CT-8 |
| Part Number | 295-216 |
| UPC | 848791001017 |
| Unit of Measure | Each |
| Weight | 0.05 |
Product Specifications | |
|---|---|
| Application | Full-Range Exciter |
| Power Handling (RMS) | 3 Watts |
| Impedance | 8Ω |
Attention CA Residents: Prop 65 Warning
WARNING:
This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov.
Need more information?
Our staff are available to answer any questions you may have about this item
Our staff are available to answer any questions you may have about this item
Look Similar Items By Category