skip to footer block
WOW WoodOwl 08810 Deep Cut Utility Auger 18" x 13/16" P4022773WOW-08810 https://cdnimages.opentip.com/full/WOW/WOW-08810.jpg WoodOwl 08810 Deep Cut Utility Auger 18" x 13/16" Manufacturer Part Number: 0881008810 WoodOwl Deep Cut Wood Boring Auger Bit 18\" Length x 13/16\" Diameter. Designed for Making Deep, Smooth Cuts in Utility Poles, Railroad Ties• Pressure-Treated Lumber, Wet or Frozen Wood• Spurred Cutting Edge for Fast and Even Cutting• Course, Burr-free Lead Screw for Quick, On-target Starts without Material Build-up• Unique Twist Design for Clean Chip Removal even in Deepest Cuts• Teflon-coated to Resist Heat and Friction• Perfectly Concentric for Even and Easy Cutting of Accurately Sized Holes• Carbon Steel Construction with Precise Heat-treat and Hardening Processes for Strength and Durability• Made in Japan.• Product Dimensions: 0.8125 x 0.8125 x 18• Item weight(lbs): 1.02Please Click Here for Catalog Page. 4022773 841271088102 1.0200lbs 0.00 0.00 0.00
WoodOwl
41.82 2025-03-28 7250 In Stock
customer review - by , January 1, 2024
5/ 5stars
I love that these don't grab into wood and dig through super fast and make a mess of the wood, blowing out the grain at the end.
customer review - by , September 9, 2023
5/ 5stars
I love this set. More of a borer than a drill bit because it removes so much material so fast. I love it.
customer review - by , June 6, 2023
5/ 5stars
These are fantastic bits. I make wooden toys and need to drill holes for windows. If you start slowly to break the first fibers of the wood and use a back up scrap for exit hole no blow out. I had to drill over 100 holes 1' into pine no blow out. I bought the full set good price.
customer review - by , May 5, 2023
5/ 5stars
Where have these been all my life. :) These bits eat through wood like a hot knife through butter!
customer review - by , May 5, 2023
5/ 5stars
These are incredible bits. I have had them for about 6 months and they drill clean and so fast that I haven't realized I've drilled all the way thru into by drill block. They actually seem to work best with an impact driver amazingly. I use them with my Milwaukee Fuel M12 Surg and l can drill an 1 1/4 hole without clamping, just holding the piece of wood I am drilling into with my other hand. I don't write many reviews but these bits by Wood Owl are revolutionary (sorry for the pun). If you drill holes in these sizes these Overdrive bits are a must. You will not regret purchasing the set. Truly amazing.
customer review - by , January 1, 2023
5/ 5stars
These bits are like a cross between Forstner and Auger bits. They cut through wood quickly and cleanly. They can also be used in a brace, which would be difficult to impossible for a Forstner. My Forstners still have a place in my work but these offer much faster, more aggressive option in certain situations.
customer review - by , January 1, 2023
5/ 5stars
Cuts very fast and leaves a clean hole. Used the 1 1/4” bit in a 18v cordless drill to hog out material so a forstner bit could finish. I think I could have used a quality 12v drill and got the job done. Very impressed!
customer review - by , November 11, 2022
5/ 5stars
These are very sharp and cut fast and clean
customer review - by , August 8, 2022
5/ 5stars
They bore a very clean hole
customer review - by , August 8, 2022
5/ 5stars
Cleanly cut thru a hard oak. Used these bits for making 3/4 inch holes in my new workbench for the purpose of housing bench dogs. Excellent bits for this application.

WoodOwl 08810 Deep Cut Utility Auger 18" x 13/16", Price/Each

stars Rating 5 | 33 reviews
Brand WoodOwl
See other products from WOW

7250 In Stock
Share & Earn 10% Cash Back Best Price in Bulk
Price: $41.82 ea X 1 qty = $41.82
Quantity Price Shipping & Handling Final Price (Shipping Fee Included) Save
1+ $41.82 $16.71 $58.53/Each 0%
25+ $39.16 $31.90 $40.44/Each 31%
This item is excluded from use of other offer, discount or coupon.

Customer also purchased

Product Description

Price is for Each.

Manufacturer Part Number: 08810

08810 WoodOwl Deep Cut Wood Boring Auger Bit 18" Length x 13/16" Diameter. Designed for Making Deep, Smooth Cuts in Utility Poles, Railroad Ties
• Pressure-Treated Lumber, Wet or Frozen Wood
• Spurred Cutting Edge for Fast and Even Cutting
• Course, Burr-free Lead Screw for Quick, On-target Starts without Material Build-up
• Unique Twist Design for Clean Chip Removal even in Deepest Cuts
• Teflon-coated to Resist Heat and Friction
• Perfectly Concentric for Even and Easy Cutting of Accurately Sized Holes
• Carbon Steel Construction with Precise Heat-treat and Hardening Processes for Strength and Durability
• Made in Japan.
• Product Dimensions: 0.8125 x 0.8125 x 18
• Item weight(lbs): 1.02

Please Click Here for Catalog Page.

warning tips WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov.

Product Warranty

WoodOwl stands behind the quality of all products and warrants that such products are free from defects in material and workmanship and that these products will perform as intended when used correctly and in compliance with all safety warnings. This warranty is valid for 90 days from confirmed receipt of purchase.
Need more information?
Our staff are available to answer any questions you may have about this item


Look Similar Items By Category


Customer Reviews
5 stars
32
4 stars
1
3 stars
0
2 stars
0
1 stars
0
By Kyle Bohnstedt
Date: January 19, 2024
I love that these don't grab into wood and dig through super fast and make a mess of the wood, blowing out the grain at the end.
Rating: 5 stars [5 of 5 Stars!]
By NVR4MONEY
Date: September 19, 2023
I love this set. More of a borer than a drill bit because it removes so much material so fast. I love it.
Rating: 5 stars [5 of 5 Stars!]
By Bernard Bynum
Date: June 27, 2023
These are fantastic bits. I make wooden toys and need to drill holes for windows. If you start slowly to break the first fibers of the wood and use a back up scrap for exit hole no blow out. I had to drill over 100 holes 1' into pine no blow out. I bought the full set good price.
Rating: 5 stars [5 of 5 Stars!]
By lao tzu
Date: May 24, 2023
Where have these been all my life. :) These bits eat through wood like a hot knife through butter!
Rating: 5 stars [5 of 5 Stars!]
By MARCAR
Date: May 08, 2023
These are incredible bits. I have had them for about 6 months and they drill clean and so fast that I haven't realized I've drilled all the way thru into by drill block. They actually seem to work best with an impact driver amazingly. I use them with my Milwaukee Fuel M12 Surg and l can drill an 1 1/4 hole without clamping, just holding the piece of wood I am drilling into with my other hand. I don't write many reviews but these bits by Wood Owl are revolutionary (sorry for the pun). If you drill holes in these sizes these Overdrive bits are a must. You will not regret purchasing the set. Truly amazing.
Rating: 5 stars [5 of 5 Stars!]
By Michael W. Yates
Date: January 21, 2023
These bits are like a cross between Forstner and Auger bits. They cut through wood quickly and cleanly. They can also be used in a brace, which would be difficult to impossible for a Forstner. My Forstners still have a place in my work but these offer much faster, more aggressive option in certain situations.
Rating: 5 stars [5 of 5 Stars!]
Items 1 - 6 of 33 reviews
 1  2  3  4  5 ...  [Next]