skip to footer block
PDL Firestone W563587031 Lap Sealant HS 11 oz P3962786PDL-W563587031 https://cdnimages.opentip.com/full/PDL/PDL-W563587031.jpg Firestone W563587031 Lap Sealant HS 11 oz Manufacture part number: W563587031Firestone Lap Sealant HS is designed to be used with Firestone Splice Adhesive for seam edge treatment applications and as a sealant in other applications as indicated by current Firestone Specialty Products specifications and details. This product requires Haz-Mat Shipping and cannot be shipped UPS Next-Day Air, Second-Day Air or Three-Day Select Firestone Lap Sealant HS Method of Application Surfaces to which Firestone Lap Sealant HS is applied must be clean, dry, free of foreign materials and excess dusting agent. Clean with broom or rags if necessary. Wait Before Applying Seam Edge Treatment Wait to apply seam edge treatemnt a minimum of 4 hours after completion of a flashing unless weather is threatening. If weather is threatening, apply Firestone Splce Adhesive to the edge of the flashing splice (next step below) before leaving the project. If weather is not threatening, the seam edge must be applied no later than the end of the next day following the completion of the seam. Coat Flashing Step-Off: Apply a layer of Firestone Splice Adhesive along the entire seam edge, a minimum of 1\" on each side of the step-off following current Firestone Splice Adhesive application procedures. Allow the Splice Adhesive to flash off. Note: If the seam edge has beeen contaminated, clean the seam edge a minimum of 1\" on each side of the step off with Firestone QuickPrime Plus and allow to dry, prior to application of the seam edge treatment. Apply Firestone Lap Sealant HS Apply a continuous bead of Lap Sealant HS approximately 3/8\" x 1/4\" centered over the flashing seam edge, using the plastic nozzle applicator supplied by Firestone. Be sure to keep the nozzle applicator centered over the lap step off. Refer to seam details. Firestone Lap Sealant HS Coverage Rate Approximately 20-22 linear feet of 3/8\" x 1/4\" bead per 11 oz tube 3962786 3.0000lbs 0.00 0.00 0.00
Firestone
17.9900 2025-04-23 Out of Stock

Firestone W563587031 Lap Sealant HS - 11 oz

Brand Firestone
Shop more from PDL

SKU: PDL-W563587031
Price: $17.99
Quantity:
Shipping:
$17.03 To [ 43215 ] Estimated Delivery Date: Apr 26, 2024 to Apr 30, 2024
Out of Stock
*  Click "Add to Shopping List" to save the item for later purchase. You can receive a notice email when it is back in stock.
Share & Earn 10% Cash Back Best Price in Bulk

Product Description

Manufacture part number: W563587031

Firestone Lap Sealant HS is designed to be used with Firestone Splice Adhesive for seam edge treatment applications and as a sealant in other applications as indicated by current Firestone Specialty Products specifications and details.
This product requires Haz-Mat Shipping and cannot be shipped UPS Next-Day Air, Second-Day Air or Three-Day Select
Firestone Lap Sealant HS Method of Application
Surfaces to which Firestone Lap Sealant HS is applied must be clean, dry, free of foreign materials and excess dusting agent. Clean with broom or rags if necessary.
  • Wait Before Applying Seam Edge Treatment
    Wait to apply seam edge treatemnt a minimum of 4 hours after completion of a flashing unless weather is threatening. If weather is threatening, apply Firestone Splce Adhesive to the edge of the flashing splice (next step below) before leaving the project. If weather is not threatening, the seam edge must be applied no later than the end of the next day following the completion of the seam.
  • Coat Flashing Step-Off:
    Apply a layer of Firestone Splice Adhesive along the entire seam edge, a minimum of 1" on each side of the step-off following current Firestone Splice Adhesive application procedures. Allow the Splice Adhesive to flash off.
    Note: If the seam edge has beeen contaminated, clean the seam edge a minimum of 1" on each side of the step off with Firestone QuickPrime Plus and allow to dry, prior to application of the seam edge treatment.
  • Apply Firestone Lap Sealant HS
    Apply a continuous bead of Lap Sealant HS approximately 3/8" x 1/4" centered over the flashing seam edge, using the plastic nozzle applicator supplied by Firestone. Be sure to keep the nozzle applicator centered over the lap step off. Refer to seam details.

Firestone Lap Sealant HS Coverage Rate
Approximately 20-22 linear feet of 3/8" x 1/4" bead per 11 oz tube

warning tips WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov.
Need more information?
Our staff are available to answer any questions you may have about this item


Customer Reviews
0 reviews
Be the first to review this item!