0 reviews
Be the first to review this item!
Pricing Note
Product Description
Manufacturer Part Number: RSB901-1
This driver's parameters were carefully optimized to match the performance of the classic Bose® 901® loudspeaker systems. Individually or in multiples, replacing your legendary but aging speakers has never been easier-or achieved better results.
Key Features:
Replacement Speaker Driver for Bose 901 4-1/2" 1 Ohm
This driver's parameters were carefully optimized to match the performance of the classic Bose® 901® loudspeaker systems. Individually or in multiples, replacing your legendary but aging speakers has never been easier-or achieved better results. The top plate and T-yoke are Japanese-made cold forged low carbon steel. The flat back plate provides a uniform surface area to which the magnet is bonded, and the outside of the back plate is chamfered to maximize flux density in the gap. Critical attention has been paid to the pole piece and voice coil tolerances, thereby assuring high yield and immunity to mechanical issues. High-grade Y-35 strontium ferrite magnet material is utilized in the motor structure to ensure consistent motor force. The cone is made of long fiber New Zealand blue color pulp paper, an ideal material for cone applications and the foam surround of this driver make it almost identical to the original manufacturers appearance, design and performance. It's rigid and just "lossy" enough to produce full, accurate sound. A 2-layer low oxygen copper voice coil is wound on a high temperature resistant polyimide former. Every driver is hand checked and tested, based on a ±2 dB window.
NOTE: This driver has an impedance of 1 ohm, and should be used only to replace the 4-1/2" driver in the Bose 901 (Series III or later) and Bose 802™ loudspeakers. Compatibility with other Bose loudspeaker models or automotive audio systems has not been verified. This product is not manufactured or distributed by Bose Corporation™, the owner of the registered trademarks BOSE®, BOSE 802™ and BOSE 901®.
This driver's parameters were carefully optimized to match the performance of the classic Bose® 901® loudspeaker systems. Individually or in multiples, replacing your legendary but aging speakers has never been easier-or achieved better results.
Key Features:
- Drop-in replacement for Bose 901 drivers
- Each individual driver is hand checked and tested
- Fits Series III, IV, V and VI models, and more
- Optimized cone/coil/suspension for linearity and reliability
- 1 ohm nominal impedance
- Premium-quality motor structure maximizes performance
Replacement Speaker Driver for Bose 901 4-1/2" 1 Ohm
This driver's parameters were carefully optimized to match the performance of the classic Bose® 901® loudspeaker systems. Individually or in multiples, replacing your legendary but aging speakers has never been easier-or achieved better results. The top plate and T-yoke are Japanese-made cold forged low carbon steel. The flat back plate provides a uniform surface area to which the magnet is bonded, and the outside of the back plate is chamfered to maximize flux density in the gap. Critical attention has been paid to the pole piece and voice coil tolerances, thereby assuring high yield and immunity to mechanical issues. High-grade Y-35 strontium ferrite magnet material is utilized in the motor structure to ensure consistent motor force. The cone is made of long fiber New Zealand blue color pulp paper, an ideal material for cone applications and the foam surround of this driver make it almost identical to the original manufacturers appearance, design and performance. It's rigid and just "lossy" enough to produce full, accurate sound. A 2-layer low oxygen copper voice coil is wound on a high temperature resistant polyimide former. Every driver is hand checked and tested, based on a ±2 dB window.
NOTE: This driver has an impedance of 1 ohm, and should be used only to replace the 4-1/2" driver in the Bose 901 (Series III or later) and Bose 802™ loudspeakers. Compatibility with other Bose loudspeaker models or automotive audio systems has not been verified. This product is not manufactured or distributed by Bose Corporation™, the owner of the registered trademarks BOSE®, BOSE 802™ and BOSE 901®.
Product Details | |
|---|---|
| Brand | GRS |
| Model | RSB901-1 |
| Part Number | 290-922 |
| UPC | 844632085055 |
| Unit of Measure | Each |
| Weight | 1.8 |
Product Specifications | |
|---|---|
| Nominal Diameter | 4-1/2" |
| Moving Mass Of Diaphragm (Mmd) | 3.38 |
| Power Handling (RMS) | 30 Watts |
| Power Handling (MAX) | 60 Watts |
| Impedance | 1Ω |
| Frequency Response | 83 to 15,000Hz |
| Sensitivity | 91.5dB 2.83V/1m |
| Voice Coil Diameter | 1" |
Thiele-Small Parameters | |
|---|---|
| Resonant Frequency (Fs) | 83.44Hz |
| DC Resistance (Re) | 0.76Ω |
| Voice Coil Inductance (Le) | 0.11mH |
| Mechanical Q (Qms) | 2.4 |
| Electromagnetic Q (Qes) | 0.43 |
| Total Q (Qts) | 0.36 |
| Compliance Equivalent Volume (Vas) | 0.24ft³ |
| Mechanical Compliance of Suspension (Cms) | 1.08mm/N |
Materials of Construction | |
|---|---|
| Cone Material | Paper |
| Surround Material | Foam |
| Voice Coil Wire Material | Copper |
| Voice Coil Former | Kapton® / Polyimide |
| Basket / Frame Material | Polymer |
| Magnet Material | Ferrite |
Mounting Information | |
|---|---|
| Overall Outside Diameter | 5.2" |
| Baffle Cutout Diameter | 4.02" |
| Depth | 2.17" |
| # Mounting Holes | 3 |
Optimum Cabinet Size (determined using BassBox 6 Pro High Fidelity suggestion) | |
|---|---|
| Sealed Volume | 0.06ft³ |
| Sealed F3 | 182Hz |
| Vented Volume | 0.14ft³ |
| Vented F3 | 104Hz |
Attention CA Residents: Prop 65 Warning
WARNING:
This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov.
Need more information?
Our staff are available to answer any questions you may have about this item
Our staff are available to answer any questions you may have about this item