Mount worked good. While trying to dry fit the mount in various locations in order to locate the best option for me, I noticed that the mount was leaving scratch marks on my dash where I dry-fitted it. Upon inspection, I noticed the mount had jagged metal edges to it where the corners of the mount were previously ground down (to accommodate my specified vehicle?). One location that I dry-fitted was where the glove box opens and closes, and that is where the jagged edges scratched my dash (only noticeable when glove box is open). I used my own grinder to smooth out these rough edges and finalized where I wanted the mount. You can use a file as well. For a finished product, you should not have to do this at all, as I have to believe that not all mounting locations will be concealed. Otherwise, I would have given 5 stars. You are limited to exactly where you can mount this, due to the contours of the bracket and how your dash is assembled. Examine your joints within your dash carefully. The glove box option may have worked, as the joint surface was easily accessible (no need to remove any dash parts), but the door would have barely impacted the mount upon closing. Your situation may vary. Ended up removing the vents and mounting there. Had to be careful when replacing the vents, as the mount was partially interfering with the reinstall. Overall very satisfied with the end result.
Rating: [4 of 5 Stars!]