skip to footer block
VAS Danner Mfg DF02722 Pondmaster Pond Mag 12 Pond Pump P1105486VAS-DF02722 https://cdnimages.opentip.com/full/VAS/VAS-DF02722.jpg Danner Mfg DF02722 Pondmaster Pond Mag 12 Pond Pump Flow rate @ 1 ft: 970 gphMax head: 13.5 feetWatts: 110. Amps: .92.Dimensions: 6.4\" X 4.5\" X 4.6\"Connections: 3/4\" FPT Inlet / 3/4\" MPT OutletFoam pre-filter. Easy to clean and replace.18 foot grounded cordFor external or submersible useCreated for the pond market, but also ideal for use in aquariumsPerformance charts (new window) 1105486 025033027220 10.4500lbs 0.00 0.00 0.00
Danner
134.9900 2025-04-16 Out of Stock
customer review - by , July 7, 2013
4/ 5stars
I originally bought the Danner 950 gpm four years ago. It worked fine and still works fine. I needed more powerful pump since i have 4 koi (along with 4 goldfish and a catfish) where the koi eat a lot of produce a lot of waste. I needed more power especially since i added an extra (smaller than the original) waterfall. Given that I put this pump in a large pot covered with lava rock, which keeps a lot of the muck away from the pump, while the rest does go to the bio-filter. This keeps the pump pressure higher for a long period of time. I haven't had to adjust anything in a few weeks. As long as the bacteria levels are kept up so that the muck is broken down, this pump has eliminated a lot of weekly maintenance.
customer review - by , June 6, 2013
5/ 5stars
I installed this pump today, and it is very quiet. I cannot tell it is on. The only way I can tell is through the water movement in my tank. This pump is well worth the money. I connected a 3/4FPT to 1 Slip adapter and let the pumping begin. I think I will order a second one to replace another noisy pump in my sump.
customer review - by , May 5, 2013
5/ 5stars
Other reviews mentioned plastic prefilter collapsed. Mine came with a plastic insert which has prevented this so far. I have a 400 gal. pond with waterfall feature and this is just right.
customer review - by , May 5, 2013
5/ 5stars
This is the second one of these I have bought. The first one lasted at least 6 years under continuous use and would have gone longer if I hadn't broken the impeller housing while trying to remove some leaves that were clogging the intake.
customer review - by , April 4, 2013
4/ 5stars
Just upgraded to this pump for my 600-ish gallon pond. I installed it last weekend and it's working beautifully and quietly. One suggestion for Danner: while overall their pumps are sturdy and reliable, the faceplates on them - which includes the output port - are plastic, which becomes a problem with repeated attaching and reattaching of hoses. The threads wear down or get damaged, particularly with metal connectors such as when I hook on my garden hose to drain my pond. My solution has been to permanently keep a plastic hose connector on it as I switch from waterfall line to drainage hose. Still, very happy with this pump and Danner products overall.
customer review - by , April 4, 2013
5/ 5stars
This pump came faster than I expected, which made me and my fish very happy. It is stronger than my old pump and I hope it will be beneficial for my pond.
customer review - by , March 3, 2013
5/ 5stars
Alot of people have had problem with the pump being loud but mine is very quiet. The efficiency of the pump could be a bit better but its not all that bad especially considered on my 125 gallon tank I would run 4 penguins 350's and a canister filter. I have big cichlids and keep them well fed which why I tend to go over kill on the filtration unit. The pump is being used to run my 75 gallon sump it would be nice if it pumped a little bit more water but thats my fault for not wanting to spend the extra 20 for the 18. Overall its a superb pump and I have used mag drive pumps for the 5 years I have been keeping fish.
customer review - by , January 1, 2013
5/ 5stars
You can never go wrong with a pond master pump. Spend a little more and have the confidence that it will outlast all the lower cost pumps, you would rather enjoy the aquarium or pond rather then always replacing a bad pump.
customer review - by , January 1, 2013
4/ 5stars
The pump in the 2months of use was easily installed and has worked nonstop 24/7 perfectly. The filter or pre filter in the picture was not the one I found on opening the package. The one received was the rigid style, actually a better type I think.
customer review - by , December 12, 2012
5/ 5stars
Used to own the 1800 gph of this same pump but it died due to a bad setup after almost ten years. Bought a few less expensive pumps to replace and they did not work as well or last but a few years at best. This 1200gph has really helped keep the water flowing through the filters to keep our pond clear and clean. Great product.
  »  
  »  
  »  
  »  
  »  

Danner Mfg DF02722 Pondmaster Pond Mag 12 Pond Pump

stars Rating 5 | 18 reviews
Brand Danner
See other products from VAS
UPC: 025033027220
SKU: VAS-DF02722
Price:
$134.99& this item ships for FREE Shipping. Details
Quantity:
Out of Stock
*  Click "Add to Shopping List" to save the item for later purchase. You can receive a notice email when it is back in stock.
Share & Earn 10% Cash Back

Product Description

Free Shipping Promotion
This item qualifies for free shipping within US 48 states. Details.

  • Flow rate @ 1 ft: 970 gph
  • Max head: 13.5 feet
  • Watts: 110. Amps: .92.
  • Dimensions: 6.4" X 4.5" X 4.6"
  • Connections: 3/4" FPT Inlet / 3/4" MPT Outlet
  • Foam pre-filter. Easy to clean and replace.
  • 18 foot grounded cord
  • For external or submersible use
  • Created for the pond market, but also ideal for use in aquariums
  • Performance charts (new window)

warning tips WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov.
Need more information?
Our staff are available to answer any questions you may have about this item
Request More Information

Customer Reviews
5 out of 5
see all 18 reviews
5 stars
13
4 stars
5
3 stars
0
2 stars
0
1 stars
0
Write a Review
By mmmmmmm
Date: July 19, 2013
I originally bought the Danner 950 gpm four years ago. It worked fine and still works fine. I needed more powerful pump since i have 4 koi (along with 4 goldfish and a catfish) where the koi eat a lot of produce a lot of waste. I needed more power especially since i added an extra (smaller than the original) waterfall. Given that I put this pump in a large pot covered with lava rock, which keeps a lot of the muck away from the pump, while the rest does go to the bio-filter. This keeps the pump pressure higher for a long period of time. I haven't had to adjust anything in a few weeks. As long as the bacteria levels are kept up so that the muck is broken down, this pump has eliminated a lot of weekly maintenance.
Rating: 4 stars [4 of 5 Stars!]
By Daquan C. Johnson
Date: June 26, 2013
I installed this pump today, and it is very quiet. I cannot tell it is on. The only way I can tell is through the water movement in my tank. This pump is well worth the money. I connected a 3/4FPT to 1 Slip adapter and let the pumping begin. I think I will order a second one to replace another noisy pump in my sump.
Rating: 5 stars [5 of 5 Stars!]
By Gerald Wilmer
Date: May 19, 2013
Other reviews mentioned plastic prefilter collapsed. Mine came with a plastic insert which has prevented this so far. I have a 400 gal. pond with waterfall feature and this is just right.
Rating: 5 stars [5 of 5 Stars!]
By wildman
Date: May 03, 2013
This is the second one of these I have bought. The first one lasted at least 6 years under continuous use and would have gone longer if I hadn't broken the impeller housing while trying to remove some leaves that were clogging the intake.
Rating: 5 stars [5 of 5 Stars!]
By HappyCampy
Date: April 22, 2013
Just upgraded to this pump for my 600-ish gallon pond. I installed it last weekend and it's working beautifully and quietly. One suggestion for Danner: while overall their pumps are sturdy and reliable, the faceplates on them - which includes the output port - are plastic, which becomes a problem with repeated attaching and reattaching of hoses. The threads wear down or get damaged, particularly with metal connectors such as when I hook on my garden hose to drain my pond. My solution has been to permanently keep a plastic hose connector on it as I switch from waterfall line to drainage hose. Still, very happy with this pump and Danner products overall.
Rating: 4 stars [4 of 5 Stars!]
By spotz51
Date: April 13, 2013
This pump came faster than I expected, which made me and my fish very happy. It is stronger than my old pump and I hope it will be beneficial for my pond.
Rating: 5 stars [5 of 5 Stars!]
Items 1 - 6 of 18 reviews
 1  2  3  [Next]