Price is only for MODEL #0056869, NOT for all items in the form below.
Manufacturer Part Number: 0056869
* Stock is dimensionally stable - use it for the most intricate work. * Deep hardening characteristics and fine grain structure. * Machines freely - fully spheroidized, annealed. * Full Length identification - eliminates confusion with other steels.
Specifications: Furnished in 36" length, ground, straight and parallel
Hardening: It is recommended that stock be heated uniformly to 1450 - 1500 deg. F and quenched in oil. Temperature of the quenching oil should be 120 - 140deg. F for best results. Do not quench in water because this is an oil hardening steel.
Tempering: For maximum toughness, a tempering time of one hour at temperature is recommended. Use chart for selecting desired Rockwell C hardness and corresponding tempering temperature. The following table may also be used as a guide depending on type of work.
Cutting Tools: 300 - 350 deg. F (Light Straw) Solid Punches and Dies: 400 - 450 deg. F (Straw) Spring Temper: 750 - 800 deg. F (Blue)
6,000 + (and growing) factories in our existing network are eager to make it for you.
When it comes to selling in stock products, we are no difference from many other Internet retailers, but we take pride in going extra miles to do something special for you: Have some products custom made for you.
We cannot do everything, but we usually can accommodate a certain changes in product options such as color, size, material, or minor design twist. We primarily work with vendors or factories, not individual artist or craftsman. For custom made products, we usually only cater to bulk size order that meets the minimum quantity requirement of a single factory run. Don't be shy. Ask. What we can accomplish may surprise you!