Cotol-240 4 oz, Adhesives & Sealants, Scuba Diving & Watersports -Clearance

Minimum order: $50, A handling charge of $5 will be added to orders on Mcnett products totalling less than $50. However, there is no minimum requirement for each individual Mcnett product. As long as the combined Mcnett total is over $50, the handling charge is waived. Cotol-240? Cleaner & Cure Accelerator is a urethane cure accelerator and pre-cleaner to be used in conjunction with Aquaseal? or Aquasure?. The solvent cleans and prepares the surface, readying it for Aquaseal? or Aquasure?, speeding the tack time to 15 minutes and the full cure time to less than two hours. Cotol-240 is also ideal for removing tar, sap, glue, and other resins from various surfaces including glass, plastic and metal. Cotol-240? Directions for use with Aquaseal? or Aquasure? Urethane Repair Adhesive and Sealant: AS PRECLEANER: Apply a small amount to the damaged area (spot test for colorfastness). Rub with a clean cloth until dry. Repeat steps 1 and 2. Apply Aquasure as directed. Note: for best adhesion, first roughen non-fabric surfaces with sandpaper. AS CURE ACCELERATOR: Thoroughly mix 1 part cure accelerator with 3?C4 parts Aquaseal? or Aquasure? using a stick, toothpick, or knife. Mix on a non-absorbent surface such as a plastic lid or plate. Immediately apply the mixture to the damaged area. Allow the repair to completely cure at least 2 hours before using. FOR COLORS: Mix food coloring or paint colorant (available at paint stores) into the Aquasure and cure accelerator before applying. CLEAN-UP: To remove Aquaseal? or Aquasure? from hands, use cloth soaked with paint thinner, nail polish remover or 99% isopropyl alcohol. STORAGE: Cap tightly. Store in cool, dry place. Use blister card package for storage.