Monoprice Monoprice 8243 Speaker Volume Controller RMS 100W Rotary Type White P3742933 http://cdnimages.opentip.com/full/MNP/MNP-8243.jpg Monoprice 8243 Speaker Volume Controller RMS 100W Rotary Type White 3742933 1.55lbs 0.00 0.00 0.00
17.9900 Discontinued

LOADING IMAGES

Monoprice 8243 Speaker Volume Controller RMS 100W (Rotary Type) - White

See other products from MNP


Discontinued
*  Click "Add to Shopping List" to save the item for later purchase. You can receive a notice email when it is back to inventory.

*  Shipping Note : This item requires additional 3 to 4 days for processing.

Optional Related Products

Product Description

Manufacturer part number: 8243

Speaker Volume Controller RMS 100W (Rotary Type) - White

This is a rotary-type wall plate volume control for speaker systems with power ratings of up to 100 watts per channel and impedance ratings of 4 to 16 ohms. This rotary control can be set to one of twelve positions, including the minimum (off) and maximum volume settings.

The wall plate mounts into a standard single-gang, low-voltage wall bracket (not included) and has inputs and outputs for one pair of stereo speaker wires (4 input connections and 4 output connections). It can accept speaker wire in sizes from 14 to 16 gauge and provides a frequency response range of 35 Hz to 20 kHz (+0/-2db) at the full power rating of 100 watts per channel.

Please note: This volume control does not include a wall mounting bracket.



Specifications
Input2 channels, 100 watts per channel
Output2 channels, 4 to 16 ohms impedance matching
Frequency Response35 Hz to 20 kHz (+0/-2 db) at rated power
Wire gauge14 to 16 AWG
MaterialPlastic ABS
Depth2 3/4"

When setting up the speaker volume controls, it is important to match the impedance of your speaker system with the load rating of your amplifier. This is done by setting the jumpers on the volume control to compensate for the number of speakers you have in a parallel configuration and the impedance level of the speakers.

If using a single pair of speakers rated at the same load level as your amplifier, you don't need to make any changes - just leave the jumper in the default x1 position. However, if your speakers are of a different impedance level and/or you have more than one set of speakers in parallel, please refer to the following chart as a guide for setting the jumpers on the speaker volume control.

Note that for any speakers wired in series, the overal impedance level is the sum of each speaker. So two 4 ohm speakers wired in series is the same impedance as a single 8 ohm speaker.


Impedance Correction Chart
Speaker
Impedance
Amplifier
Rating
Jumper Setting /
# of Speaker Pairs
x1x2x4x8
4 ohm speakers2 ohms2 pairs4 pairs8 pairs16 pairs
4 ohms1 pair2 pairs4 pairs8 pairs
8 ohmsn/a1 pair2 pairs4 pairs
8 ohm speakers2 ohms4 pairs8 pairs16 pairs32 pairs
4 ohms2 pairs4 pairs8 pairs16 pairs
8 ohms1 pair2 pairs4 pairs8 pair
16 ohm speakers2 ohms8 pairs16 pairs32 pairs64 pairs
4 ohms4 pairs8 pairs16 pairs32 pairs
8 ohms2 pairs4 pairs8 pair16 pairs

NOTE: International(exclude Canada)/PO box deliveries are not available.




Product Specifications

ConditionNew


Restricted States

This product does not ship to the APO address and the following addresses: HI, AK, PR.


Need more information?
Our staff are available to answer any questions you may have about this item
Request More Information


Customer Reviews
0 reviews
Be the first to review this item!

Your Recent History