Product Description
Our highest gain, directional cell phone antenna - for 800MHz Cellular and iDEN/Nextel only.
Compatible with all generations of CDMA, GSM and TDMA including GSM, GPRS, EDGE, UMTS, HSDPA, CDMA, 1xRTT, EVDO, TDMA, AMPS, iDEN, Nextel - 800/850MHz and 900MHz Bands Only
Detailed Description
The Wilson Cellular Yagi Antenna's main benefit over our other antennas is its ability to focus its signal in one direction. This antenna is designed for use on stationary objects such as buildings. If this antenna is not aimed correctly it will lose its effectiveness.
Since the Yagi is a single band 800MHz antenna it will only work with 800MHz Cellular and iDEN (Nextel, Southern LINC, Mike) signals. It will not work with T-Mobile, Sprint PCS, or other 1900MHz signals.
Does not include pole/mast - see FMW4-YMST4: Antenex 4' x 1-1/4" Aluminum Mast and 4" Standoff Wall Mounts (2 Brackets)
Cable
The antenna includes no cable. For a short run of 20' you can use our 20' RG-58 coax extension which has the appropriate connections for the Yagi. Please note that our other RG-58 cables can not be directly connected to the Yagi antenna.
For longer runs, we suggest using one of the below lengths of Ultra Low Loss 9913 Cable. This cable is fairly stiff so if you plan on connecting the Yagi directly to your phone with an antenna adapter we suggest you also include an 5' RG-58 extension. The below cables may also be connected together using the N-Female to N-Female barrel connector.
The primary difference between RG-58 and 9913 is the dB signal loss. RG-58 loses approximately 12dB/100' while 9913 loses about 4dB/100' (which is a big difference).
9913 Extensions Cables:
20' 9913 Cable
30' 9913 Cable
50' 9913 Cable
75' 9913 Cable
100' 9913 Cable
A phone adapter cable is required to connect Wilson Cellular antennas to your phone.
Features:
800MHz Cellular and iDEN Frequency bands
Compatible with all Cellular, PCS and iDEN providers
Directional antenna
Built-in ground plane
Pole mounting hardware included. Does not include pole/mast - see FMW4-YMST4: Antenex 4' x 1-1/4" Aluminum Mast and 4" Standoff Wall Mounts (2 Brackets)
For fixed installations
Requires:
Phone Adapter Cable: All Wilson Cellular Antennas require a phone adapter cable in order to connect to your cell phone
Documents:
Specifications
Part Number 301111
Frequency Range 806-940MHz
Impedance 50 Ohms
Antenna Gain 13dBi (10dB) @ 855MHz
Maximum Power 50 Watts
Radiation Directional
Polarization Vertical or Horizontal
Wavelength 2 (806-940MHz)
Ground Plane Built-In Ground Plane
Elements 8
Connector N Female
Material Aluminum
Height 7.5"
Width 32.5"
Mount Mounts on 0.5" to 1.5" diameter pip
|
Overstock Clearance
