Product Description
Compatible with iDEN Carriers (Nextel, Southern LINC, Mike) using 806-866MHz
Detailed Description
Features:
Maximum 3 Watts Output Power on iDEN (Nextel, Southern LINC, Mike) Frequencies (806MHz-866MHz)
Power Control Logic ensures Maximum Output Power is within iDEN Standards
Automatic Gain Control
Can be Used in a Fixed or Mobile Application
FCC Type Accepted
Key Notes:
Must be connected directly to phone with Wilson Cellular phone adapter cable (not included.)
Requires Wilson Cellular antenna (not included)
May be connected to car kit with appropriate adapter
The Direct Connect (inline) Bi-directional Amplifier improves RF coverage in areas with no signal or low signal strength. The unit amplifies iDEN (Nextel, Southern LINC, Mike) signals providing up to 3 Watts of output power. Increases your phone's coverage up to 50 miles or more (under ideal conditions.)
Works with all iDEN (Nextel/Southern LINC/Mike) providers. Not compatible with 800MHz Cellular or 1900MHz providers.
How the unit functions:
The 800MHz iDEN signal from the cell site is received by the Wilson Cellular antenna (sold separately). The signal is then amplified and transmitted to your phone through the Wilson Cellular phone adapter cable (sold separately). When the phone transmits, the signal is sent to the amplifier through the adapter and then amplified and sent to the cell site through the outside antenna.
Compatible with:
Nextel, Southern LINC, Mike. Not compatible with Cellular/PCS carriers such as AT&T, Verizon, Alltel, US Cellular, Midwest Wireless, Sprint PCS, T-Mobile, Qwest, etc
Cellular/PCS users should use the 811201 - Wilson Cellular 800MHz/1900MHz Dual-Band 3 Watt Direct Connection Amplifier
Nextel Rebanding note: Due to interference between the Nextel 800MHz band and the Public Safety 800MHz band, Nextel will be moving their service to the 900MHz band. What this means is that at some point your 800MHz amplifier will need to be replaced with a 900MHz amplifier.
Ideal for use with car kits requiring an external antenna. Most Motorola full install car kits will require an FME/Male to Mini UHF/Male adapter for use.
Includes:
814001 Bi-Directional Nextel/iDEN Inline Amplifier
6' Adapter Extension Cable
12V DC Power Adapter (Car Charger)
Requires (not included):
External Antenna with FME Female connection (Wilson Cellular Antenna)
Phone Specific Antenna Adapter with FME Male connection to connect directly to your phone. With appropriate adapter may be connected to most full install car kits which support an external antenna.
Specifications
Part Number 814001
Frequency 806-866MHz
Gain (up/down) Cell Site Controlled
Max 10/10
Linear Output Power +30dBm
Max Output Power 3 Watts
Max RF (up/down) +35dBm/+5dB,
Noise Figure (down) 3.5dB Nominal
Flatness +/- 2dB
Isolation 90dB
Power Consumption 12V, 1.5A
Connectors FME Male, 50 Ohms
Dimensions 5.5 * 4.3 * 1.4 (inch)
Weight 1.32 lbs
|
Overstock Clearance
