Product Description
Compatible with all 800MHz Carriers except iDEN (Nextel, Southern LINC, Mike)
Detailed Description
This is a single-band 800MHz amplifier. Dual-Band or 1900MHz users/carriers should use the 811201 - Wilson Cellular 800MHz/1900MHz Dual-Band 3 Watt Direct Connection Amplifier
Features:
Maximum 3 Watts Output Power on 800MHz. Allows full benefit of Outside Antenna on 1900MHz
Passes TIA/EIA-98-E transmit tests for evaluating CDMA Cellular Phones
Power Control Logic ensures Maximum Output Power is within Cellular Standards
Automatic Gain Control
Can be Used in a Fixed or Mobile Application
FCC Type Accepted
Key Notes:
Must be connected directly to phone with Wilson Cellular phone adapter cable (not included.)
Requires Wilson Cellular antenna (not included)
May be connected to car kit with appropriate adapter
The Direct Connect (inline) Bi-directional Amplifier improves RF coverage in areas with no signal or low signal strength. The unit amplifies 800MHz AMPS, TDMA, CDMA and GSM signals and passes through 1900MHz PCS signals providing up to 3 Watts of output power on the 800MHz band. Increases your phone's coverage up to 50 miles or more (under ideal conditions.)
Works with all 800MHz Cellular Service Providers except iDEN (Nextel/Southern LINC/Mike). Not recommended for 1900MHz PCS Carriers.
How the unit functions:
The 800MHz cellular signal from the cell site is received by the Wilson Cellular antenna (sold separately). The signal is then amplified and transmitted to your phone through the Wilson Cellular phone adapter cable (sold separately). When the phone transmits, the signal is sent to the amplifier through the adapter and then amplified and sent to the cell site through the outside antenna. 1900MHz PCS signals gain the benefit of the antenna but are not amplified.
Compatible with:
Recommended for Verizon, Alltel, US Cellular, Midwest Wireless and other 800MHz cellular carriers. Not recommended for Sprint PCS, T-Mobile, Qwest or AT&T GSM users.
Dual-Band or 1900MHz users/carriers should use the 811201 - Wilson Cellular 800MHz/1900MHz Dual-Band 3 Watt Direct Connection Amplifier
Ideal for use with car kits requiring an external antenna. Adapter may be required to connect to your particular car kit.
Includes:
811101 Bi-Directional 800MHz Single-Band (800MHz Amplified/1900MHz Passthrough) Amplifier
6' Adapter Extension Cable
12V DC Power Adapter (Car Charger)
Requires (not included):
External Antenna with FME Female connection (Wilson Cellular Antenna)
Phone Specific Antenna Adapter with FME Male connection to connect directly to your phone. With appropriate adapter may be connected to most full install car kits which support an external antenna.
Specifications
Part Number 811101
Frequency 824-894MHz (Amplified)
1850-1990MHz (Passthrough)
Gain (up/down) Cell Site Controlled
Max 10/10
Linear Output Power +30dBm
Max Output Power 3 Watts
Max RF (up/down) +35dBm/+5dB,
Noise Figure (down) 3.5dB Nominal
Flatness +/- 2dB
Isolation 90dB
Power Consumption 12V, 1.5A
Connectors FME Male, 50 Ohms
Dimensions 5.5 * 4.3 * 1.4 (inch)
Weight 1.32 lbs
|
Overstock Clearance
